HEAD. Enable VIMAGE in GENERIC kernels and some others (where GENERIC does
not exist) on HEAD.
Disable building LINT-VIMAGE with VIMAGE being default.
This should give it a lot more exposure in the run-up to 12 to help
us evaluate whether to keep it on by default or not.
We are also hoping to get better performance testing.
The feature can be disabled using nooptions.
Requested by: many
Reviewed by: kristof, emaste, hiren
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12639
Turn on the required options in the ERL config file, and ensure
that the fbt module is listed as a dependency for mips in
the modules/dtrace/dtraceall/dtraceall.c file.
PR: 220346
Reviewed by: gnn, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12227
* Add in the hints needed for AR933x ath(4) support - this is the nicer way
that allows ath to be a module;
* ATH_EEPROM_FIRMWARE is also required for all AR933x chipsets.
Tested:
* Carambola2, AR933x
This brings the default configurations (drivers, net80211 settings, etc) and some
of the shared configuration into std.AR_MIPS_BASE. I haven't yet moved the
-current settings (witness, memguard, etc) into it.
This should simplify building a lot of the same test images for my MIPS AP board
development and testing.
This is a work in progress; it's not designed to be perfect!
* add EARLY_PRINTF for debugging
* update module list to be much larger
* add random, otherwise well, stuff doesn't work.
* IPFIREWALL_DEFAULT_TO_ACCEPT
Tested:
* AP93 (AR7240 + AR9280)
TODO:
* rename to std.AR724X
* unify the built module list between all of the mips24k/mips74k atheros config files -
now that the HAL, hwpmc, USB, etc are per-chip/per-arch modules it is easy to just
compile them all and only include the ones you care about.
* Map change: create a combined kernel+rootfs image. The instructions I'll post
on the wiki (which will be for a very outdated dev board, but at least will
explain the what/why for posterity) will include how to reset the boot command.
Tested:
* AP93 dev board (AR7240 + AR9280)
* Target module have ic plus etherswitch ip175c.
* Also add etherswitch support code on rt driver.
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D10336
Make the random number generator work so we can do WPA encryption on the AP's.
Submitted by: Michael Vale <m.vale@live.com.au>
Pull Request: https://github.com/freebsd/freebsd/pull/16
Stop building BERI_DE4_BASE and BERI_SIM_BASE, they aren't particularly
valid as they don't have a root dev. Do build BERI_DE4_SDROOT which
does so devices get coverage.
Remove ident from BERI_DE4_BASE for the reasons above which will cause
it to fail to build. BERI_SIM_BASE was already this way and broke
universe.[0]
Reported by: rpokala
Sponsored by: DARPA, AFRL
Upstream GCC and devel/mips64-gcc use "octeon+" as the CPU setting for
the Octeon processor in the EdgeRouter Lite. As of r312899 the base
system GCC 4.2.1 accepts octeon+ as an alias for the Octeon support
added in r208737 for the same CPU.
Sponsored by: The FreeBSD Foundation
This patch adds missing hints for ath0 (eepromaddr) and GPIO (mask & leds).
ath0 doesn't work without eeprom hints, so this commit should make wifi
works on Onion Omega.
GPIO mask is required if you want to use gpiobus and GPIO pins on your
board. Onion Omega has several leds connected to gpio pins (one on board,
one color on dock).
This commit adds mask for gpiobus and allow you to turn off/on leds via
/dev/leds/{board,blue,green,red} (on by default).
Tested on Onion Omega 1.
Reviewed by: adrian
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D9107
- em(4) igb(4) and lem(4)
- deprecate the igb device from kernel configurations
- create a symbolic link in /boot/kernel from if_em.ko to if_igb.ko
Devices tested:
- 82574L
- I218-LM
- 82546GB
- 82579LM
- I350
- I217
Please report problems to freebsd-net@freebsd.org
Partial review from jhb and suggestions on how to *not* brick folks who
originally would have lost their igbX device.
Submitted by: mmacy@nextbsd.org
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Limelight Networks and Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8299
Build and install an o32 set of libraries on mips64 suitable for
running o32 binaries via COMPAT_FREEBSD32. Enable COMPAT_FREEBSD32 in
MALTA64.
Reviewed by: jmallett, imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D9032
Recognize new MACHINE_ARCH names now as we have added hardfloat support.
Switch JZ4780 to mipselhf and remove all uses of TARGET_ARCH in kernel
.mk files.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8989
It is required to proceed full cache flush before we can use wait
instruction on multicore, so use nop instead for now.
Submitted by: kan
Sponsored by: DARPA, AFRL
X1000 systems on chips.
Imgtec CI20 and Ingenic CANNA boards supported.
Submitted by: Alexander Kabaev <kan@FreeBSD.org>
Reviewed by: Ruslan Bukin <br@FreeBSD.org>
Sponsored by: DARPA, AFRL
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
