appropriate(?) defaults for "low", "medium" and "high" security
environments. Medium is basically what we currently have with a little
seat-belt tightening where it made sense. Low is the same as medium but
without the tightening. High is positively fascist with nothing turned
on by default and an automatic call to 911 if it can find a modem.
really doesn't make any sense, what was I smoking) and allow
the more canonical usage of "any" for either side of the comparison
for release name or architecture (meaning you can also set CD_VERSION=any
in a cdrom.inf file to cause sysinstall to always match it and likewise
with the architecture, if specified).
Sensibly suggested by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
Previously, these cards were supported by the lnc driver (and they
still are, but the pcn driver will claim them first), which is fine
except the lnc driver runs them in 16-bit LANCE compatibility mode.
The pcn driver runs these chips in 32-bit mode and uses the RX alignment
feature to achieve zero-copy receive. (Which puts it in the same
class as the xl, fxp and tl chipsets.) This driver is also MI, so it
will work on the x86 and alpha platforms. (The lnc driver is still
needed to support non-PCI cards. At some point, I'll need to newbusify
it so that it too will me MI.)
The Am79c978 HomePNA adapter is also supported.
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
on Alpha, primarily in the storage adapter area. Things like
Soundblaster-attached CDs, WD7000 etc for example. Try to get RELNOTES
for alpha to reflect reality a bit more.
When we use PC-Card as install media, it is a patch
to tell with beep about whether we were able to
recognize it well.
Reviewed by: jkh, imp
Tested by: Kenji Yamada <kyamada@ISI.EDU>
alpha: tap driver, accept_filters, ata support for ATA100,
routed update to 2.22, truncate(1), syslogd(8) -n option, kenv(1),
periodic(8) controlled by periodic.conf, logger(1) support for
remote syslogs.
i386: tap driver, accept_filters, ata support for ATA100,
routed update to 2.22, truncate(1), syslogd(8) -n option, kenv(1),
periodic(8) controlled by periodic.conf, boot98cfg(8),
logger(1) support for remote syslogs.
PR: 20628
Submitted by: bmah@cisco.com (Bruce A. Mah)
Reviewed by: nik
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
Make sysinstall override this on install, so the effective behavioural
change for a newly installed system is null. Overall, this makes a system
with an empty /etc/rc.conf not run any network services, and makes the
FreeBSD-provided network services that are running visible in /etc/rc.conf
(instead of making people look through /etc/defaults/rc.conf to find the
things they need to disable to secure the system.)
Reviewed by: jhb
Discussed with: The usual cabal
3.3.6 base distribution, some of the packing lists needed hacking so that
they would pack up everything in the right place. As a result, go ahead and
just add a directory for the packing lists. These are the i386 packing lists.
corresponding tarball from it. It uses the packing list name to determine
the tarball name. If the tarball name ends in 'gz', it will be gzipped, if
it ends in 'bz', it will be bzip2'd.
XFree86 3.3.6 into a scratch directory. The patch file patches the XFree86
port to not ask any questions and to actually be able to install some things
like the i810 server link kit bits. If you want XF86Setup to build, you
should have tk80 (not tk82) installed. If you want to XF86Setup_jp to build
you need to have ja-tk80 installed.
Now, if a release is specified, instead of just looking for a directory
with the same name as the release, try several possible directories (each
suffixed with the release name) relative to the base directory including
".", "releases/MACHINE", "snapshots/MACHINE", and each of those prefixed
with "pub/FreeBSD/". This will allow us to remove the evil symlinks under
pub/FreeBSD/releases/MACHINE/ to the snapshots on the ftp site.
does bad things to /etc/make.conf in certain situations. Also
soften the "don't install crypto from the USA!" messages since,
except for RSA (which is still noted), that's not so true anymore.
build process in too many cases. Adding mtree to bootstrap-tools
to solve this breaks the upgrade path because mtree needs a
libc that has strtofflags and fflagstostr.
kernel config file.
- Add WORLD_FLAGS and KERNEL_FLAGS so you can build world and kernel with
extra make options such as -jX to speed up release builds.
- When building kernels, allow their hints to tag along, and use this to
install hints onto the boot floppy. Since the boot floppy doesn't load
loader.4th, we have to change device.hints to strip comments and change
each line to an explicit set command.
1. Correct FTP site for 4.0-stable snapshots and delete sentence
fragment immediately following.
[ not applicable to HEAD ]
2. Add FDDI section to table of contents (see #5 below) and add
one line of whitespace.
3. In userland section, document csh->tcsh, more->less, and
colorized ls.
4. In Ethernet section, do:
s/gigabit ethernet/Gigabit Ethernet/
s/fast ethernet/Fast Ethernet/
s/ethernet/Ethernet/
5. Pull DEC DEFPA/DEFEA *FDDI* cards out of the *Ethernet* section
and into their own second-level section.
6. Add missing period in section header in ATM section.
7. Tweak upgrading sectio with some new text, not sure if this is
much better though.
8. Add a blurb about the -stable mailing list.
[ changed to -current list in HEAD ]
PR: 20015
Submitted by: Bruce A. Mah <bmah@cisco.com>
the building of the crunched binary.
I'll add examples when I add the post-include mechanism, since the
crunch.mk environment stomps on the pre-included crunch.inc's variables
at the moment.
objects, to simplify working with PicoBSD.
Add the ability to put make instructions in crunch.inc to pass to the
build process.
Now explicitly make the objects in our own object tree, since we want to
build the objects with our own defines, and allow this to occur in a
common object tree for all PicoBSD builds, if required. This is
controlled by the COMM_OBJ variable, for those who don't want this -
setting it to /usr/obj again will just pick up the objects from your
last make buildworld, as before.
for read-only src tree.
While I'm there:
1) Use kgzip, not kzip, since kzip certainly doesn't make bootable
kernels anymore. loader still isn't built separately, let alone without
forth support. This needs to be fixed.
2) Expand the mount/vnconfig examples to be the defacto way of making
sure the filesystems are mounted, unmounted, or not configured. This
needs more work.
3) quieten the build substantially, so errors are more prominent
4) Start of '-j' ability. Current style isn't quite in the correct
dependency format for this, but obvious mistakes (changing directories
in main shell) are fixed.
Approved by: grog, dwhite, luigi (no objections to me doing a makeover)
over flowing its britches. So remove all ppbus bits except those for PLIP
(untested), and all USB bits as SRM does not know what USB is. Also remove
/dev/random as I don't think we need it just for whacking bits onto a disk.
Approved by: JKH
IPv6 configuration is only done by rtsol. Does someone really
need manual configuration? :-)
You can specify IPv6 DNS server as well.
We have only one server ftp7.jp.freebsd.org that speaks IPv6
in this time. ftp7.jp speaks IPv4 as well and also listed as
Japan #7.
Approved by: jkh
- Add a note about supporting USB out of the box during installs and
beyond.
- Add a note about the changes to the i386 bootstrap to work around the
1024 cylinder problem. Note that boot0 is now 2 sectors long.
Reminded by: kkenn
controller chip. This chip is currently being used on the NetGear
FA312-TX adapter, which I guess is a replacement for the FA310-TX
(PNIC-based).
I added support for this chip by modifying the sis driver since
the SiS 900 and the NS DP83815 have almost the same programming
interface (the RX filter programming and PHY access methods are
different, but the general configuration, DMA scheme and register
layout are identical).
I would have had this done a lot sooner, but getting the damn MAC
address out of the EEPROM proved to be more complicated than expected.
rc and login.conf files from the /etc directory on the floppy.
This prevents the overwrite yes/no prompt from occuring in gzip.
(some PicoBSD disks use gzip and some use minigzip, so the gzip -f flag (force)
is not an option. minigzip has a different meaning for the -f flag.}
- Small cleanups to kernel installs.
- Don't install kernel.config and loader.config on the boot floppy since
they haven't been used in quite some time.
src/release/{boot,fixit}_crunch.conf.
- Added machine specific fixit_crunch.conf for PC/AT and PC-98 to
src/release/$MACHINE.
- Use config file in src/release/$MACHINE if exist. If it does not exist,
use in src/release.
around with floppies. Also document (for lack of a more appropriate place/file)
the problems the installer has when other disks are present with a BSD
disk label on them. Please remove this warning when the problem is fixed.
PR: alpha/17642
boot.flp and plain boot.flp.
- Clean up crunchgen related routine.
- Add PC-98 support.
TODO:
o Documentation
o Fix some messages for PC-98
o Decrease the size of fixit.flp to 1.2MB
o I18N (See: http://www.jp.FreeBSD.org/BootAsia/index.html)
No response from jkh
