Having all filesystems fall through to default values isn't always correct
and these values can vary for different filesystem implementations. Most
of these changes just use the existing default values with a few exceptions:
- Don't report CHOWN_RESTRICTED for ZFS since it doesn't do the exact
permissions check this claims for chown().
- Use NANDFS_NAME_LEN for NAME_MAX for nandfs.
- Don't report a LINK_MAX of 0 on smbfs. Now fail with EINVAL to
indicate hard links aren't supported.
Requested by: bde (though perhaps not this exact implementation)
Reviewed by: kib (earlier version)
MFC after: 1 month
Sponsored by: Chelsio Communications
- Define a NFS_LINK_MAX as UINT32_MAX to match the wire protocol.
- Use NFS_LINK_MAX instead of LINK_MAX as the fallback value reported
for a PATHCONF RPC by the NFS server.
- Use NFS_LINK_MAX instead of LINK_MAX as the default value reported
by the NFS client pathconf() if not overridden by the NFS server.
- When reading the link count out of an RPC reply, read the full 32
bits instead of the lower 16 bits.
Reviewed by: rmacklem (earlier version)
Sponsored by: Chelsio Communications
This method handles _PC_FILESIZEBITS, _PC_SYMLINK_MAX, and _PC_NO_TRUNC.
For other values it defers to vop_stdpathconf().
MFC after: 1 month
Sponsored by: Chelsio Communications
The method handles NAME_MAX and LINK_MAX explicitly. For all other
pathconf variables, the method passes the request down to the underlying
file descriptor. This requires splitting a kern_fpathconf() syscallsubr
routine out of sys_fpathconf(). Also, to avoid lock order reversals with
vnode locks, the fdescfs vnode is unlocked around the call to
kern_fpathconf(), but with the usecount of the vnode bumped.
MFC after: 1 month
Sponsored by: Chelsio Communications
dvp->v_mount after dvp is unlocked.
The vnode might be reclaimed after unlock, so v_mount becomes NULL.
Cache the struct mount pointer before the unlock, the struct is
type-stable.
Note that devfs_allocv() reads mp->mnt_data but does not operate on it
further when dirent is doomed. The unmount cannot proceed until all
dirents are reclaimed.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This commit defines some macros used by the pNFS server code.
They will not be used until the main pNFS server code merge occurs,
which will probably be in April 2018.
there are no write delegations issued.
manu@ reported on the freebsd-current@ mailing list that there was
a significant performance hit in nfsrv_checkgetattr() caused by
the acquisition/release of a state lock, even when there were no
write delegations issued.
This patch add a count of outstanding issued write delegations to the
NFSv4 server. This count allows nfsrv_checkgetattr() to return without
acquiring any lock when the count is 0, avoiding the performance hit
for the case where no write delegations are issued.
Reported by: manu
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13327
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Msdosfs allows setting READONLY by clearing the owner write bit of the file
mode. (While here, correct the misspelling of S_IWUSR as VWRITE. No
functional change.)
In msdosfs_getattr, intuitively reflect that READONLY attribute to userspace
in the file mode.
Reported by: Karl Denninger <karl AT denninger.net>
Sponsored by: Dell EMC Isilon
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
similar to the kernel memory allocator.
This simplifies NUMA allocation because the domain will be known at wait
time and races between failure and sleeping are eliminated. This also
reduces boilerplate code and simplifies callers.
A wait primitive is supplied for uma zones for similar reasons. This
eliminates some non-specific VM_WAIT calls in favor of more explicit
sleeps that may be satisfied without new pages.
Reviewed by: alc, kib, markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
instead of malloc(). The SWAP objects are automagically freed when there are no
more consumers. This greatly simplifies the mmap logic inside CUSE(3) in the
kernel. This change fixes an issue where mmapped memory can accumulate and never
get freed, if many different mmap sizes are needed over time. Further this
change fixes memory leaks when the CUSE(3) kernel module is unloaded.
While at it make sure the CUSE_ALLOC_PAGES_MAX limit is treated as an exclusive
limit. CUSE(3) memory maps must be less than CUSE_ALLOC_PAGES_MAX number of pages.
Reviewed by: kib @
Differential Revision: https://reviews.freebsd.org/D11392
Sponsored by: Mellanox Technologies
MFC after: 1 week
Clearing the unr in tmpfs_unmount is not correct. In the case of
multiple references to the tmpfs mount (e.g. when there are lookup
threads using it) it will not be the one to finish tmpfs_free_tmp. In
those cases tmpfs_free_node_locked will be the final one to execute
tmpfs_free_tmp, and until then the unr must be valid.
Reported by: pho
Approved/reviewed by: rstone (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12749
Inspired by a patch submission by longwitz@incore.de with many changes
for ino64 in HEAD.
PR: 199152
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
When the NFSv4.1 pNFS client is using a Flexible File Layout specifying
mirrored Data Servers, it must do the writes and commits to all mirrors.
This patch modifies the client to use a taskqueue to perform these writes
and commits concurrently.
The number of threads can't be changed for taskqueue(9), so it is set
to 4 * mp_ncpus by default, but this can be overridden by setting the
sysctl vfs.nfs.pnfsiothreads.
Differential Revision: https://reviews.freebsd.org/D12632
The client IP address was not being reported for some NFSv4 mounts by
nfsdumpstate. Upon investigation, two problems were found for mounts
using IPv4. One was that the code (originally written and tested on i386)
assumed that a "u_long" was a "uint32_t" and would exactly store an
IPv4 host address. Not correct for 64bit arches.
Also, for NFSv4.1 mounts, the field was not being filled in. This was
basically correct, because NFSv4.1 does not use a callback address.
However, it meant that nfsdumpstate could not report the client IP addr.
This patch should fix both of these issues.
For IPv6, the address will still not be reported. The original NFSv4 RFC
only specified IPv4 callback addresses. I think this has changed and, if so,
a future commit to fix reporting of IPv6 addresses will be needed.
Reported by: manu
PR: 223036
MFC after: 2 weeks
tmpfs uses unr(9) to allocate inodes. Previously when unmounting it
would individually free the units when it freed each vnode. This is
unnecessary as we can use the newly-added unrhdr_clear function to clear
out the unr in onde go. This measurably reduces the time to unmount a
tmpfs with many files.
Reviewed by: cem, lidl
Approved by: rstone (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12591
When a "pnfs" NFSv4.1 mount is hung because of an unresponsive DS,
a forced dismount wouldn't work, because the RPC socket for the DS
was not being closed. This patch fixes this.
This will only affect "pnfs" mounts where the pNFS server's DS
is unresponsive (crashed or network partitioned or...).
Found during testing of the pNFS server.
MFC after: 2 weeks
This patch adds support for the Flexible File Layout to the pNFS client.
Although the patch is rather large, it should only affect NFS mounts
using the "pnfs" option against pNFS servers that do not support File
Layout.
There are still a couple of things missing from the Flexible File Layout
client implementation:
- The code does not yet do a LayoutReturn with I/O error stats when
I/O error(s) occur when attempting to do I/O on a DS.
This will be fixed in a future commit, since it is important for the
MDS to know that I/O on a DS is failing.
- The current code does writes and commits to mirror DSs serially.
Making them happen concurrently will be done in a future commit,
after discussion on freebsd-current@ on the best way to do this.
- The code does not handle NFSv4.0 DSs. Since there is no extant pNFS
server that implements NFSv4.0 DSs and NFSv4.1 DSs makes more sense
now, I don't intend to implement this until there is a need for it.
There is support for NFSv4.1 and NFSv3 DSs.
This patch adds a few definitions for the Flex File Layout.
Until a future commit adds Flex File layout support, these new fields
are not used.
This patch should not affect the "pnfs" option for File Layout.
Such updates consisted of vast majority of modificiations, especially
in tmpfs_reg_resize.
For the case where page count did no change and the size grew we only
need to update tn_size. Use this fact to avoid vm object lock/relock.
MFC after: 1 week
This patch modifies the pNFS client layout and deviceinfo structures
to add fields and unions for the Flex File Layout. Until a future
commit adds Flex File layout support, these new fields are not used.
This patch should not affect the "pnfs" option for File Layout.
This patch adds a NFSSTA_FLEXFILE flag that will be used to enable
Flexible File Layout for the NFSv4.1 pNFS client. It is not yet
used, but will be after a future commit adds Flex File Layout support.
This patch changes nfsv4_getipaddr() and nfsrpc_fillsa() to use
a sockaddr_in * and sockaddr_in6 * instead of sockaddr_storage, to
avoid allocating the latter on the stack. It also moves the nfsrpc_fillsa()
call to after the completion of parsing of the DeviceInfo reply from
the server. This patch is in preparation for addition of Flex File
Layout support in a future commit.
It only affects the "pnfs" NFSv4.1 client mount option and should not
have changed its semantics.
When a "pnfs" NFSv4.1 mount was unmounted, it didn't free up the layouts
and deviceinfo structures. This leak only affects "pnfs" mounts and only
when the mount is umounted.
Found while testing the pNFS Flexible File layout client code.
MFC after: 2 weeks