Commit Graph

322 Commits

Author SHA1 Message Date
phk
2c6b097f46 Trapdoor access to cd%da and cd%c so they still work, but do not let them
show up in /dev.
2002-10-11 10:35:17 +00:00
phk
8e75bfcf99 Use malloc(9)'s M_ZERO rather than explicit bzero(9) call. 2002-10-11 09:59:22 +00:00
ken
13b9c6f277 Fix the location of the length bytes in the 12-byte read/write CDB
structure.  This has been broken since 1998, but probably hasn't been
noticed because it takes a read/write of 64K blocks (32MB with 512 byte
blocks) to trigger using the 12 byte read/write CDB in scsi_read_write().

Submitted by:	"Moore, Eric Dean" <emoore@lsil.com>
MFC after:	3 days
2002-10-08 17:12:44 +00:00
phk
e0eaaedba9 Correctly convert to appropriate blocksize.
note to self:
Never check block-size sensitive patches on Sun compatible CD drives.

Sponsored by:	DARPA & NAI Labs.
2002-10-07 07:19:14 +00:00
phk
54a5f50c0e Unhook the SCSI CD driver from the disk "mini-layer" and/or GEOM.
SCSI disks are too square pegs for the round holes in both of these.

And since atapi-cd has clearly shown that there are better acccess
models for CD media than trying to pretend to be a classical disk,
we stop the masquerade rather than patch up the costume.

But do implement the DIOCGMEDIASIZE and DIOCGSECTORSIZE so it will
be possible to manually attach to GEOM, should some the need arise.

Ideally, this driver should do media-detection and call make_dev()
when a CD is inserted and destroy_dev() when it is removed, this
would allow our future devd(8) to automount etc etc but coding that
takes SCSI-clue beyond anything I posses.

Tested on:      sparc64
2002-10-04 13:33:30 +00:00
ken
1e1bdbe46b Fix style problems in the quirk entry section.
MFC after:	2 weeks
2002-10-03 19:59:24 +00:00
sobomax
bf14b7124b Add quirks for DaisyTechnology PhotoClip camera.
Submitted by:	Olexander Kunitsa <kunia@istc.kiev.ua>
MFC after:	3 days
2002-10-01 15:42:04 +00:00
guido
ce2b123626 Add quirk for Apacer HandyDrive
MFC after:	1 week
2002-09-30 10:11:34 +00:00
phk
1dfc2c167f Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by:    FlexeLint warning #512
2002-09-28 17:15:38 +00:00
alfred
ac315391ce use __packed. 2002-09-23 18:54:32 +00:00
mjacob
a2fde432eb A SCSI_DELAY of zero is a legitimate value to have.
The notion that you must "always" have a delay is at best misinformed.
2002-09-23 04:56:35 +00:00
phk
57a346a213 (This commit touches about 15 disk device drivers in a very consistent
and predictable way, and I apologize if I have gotten it wrong anywhere,
getting prior review on a patch like this is not feasible, considering
the number of people involved and hardware availability etc.)

If struct disklabel is the messenger: kill the messenger.

Inside struct disk we had a struct disklabel which disk drivers used to
communicate certain metrics to the disklayer above (GEOM or the disk
mini-layer).  This commit changes this communication to use four
explicit fields instead.

Amongst the benefits is that the fields do not get overwritten by
wrong or bogus on-disk disklabels.

Once that is clear, <sys/disk.h> which is included in the drivers
no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in,
the few places that needs them, have gotten explicit #includes for
them.

The disklabel inside struct disk is now only for internal use in
the disk mini-layer, so instead of embedding it, we malloc it as
we need it.

This concludes (modulus any mistakes) the series of disklabel related
commits.

I belive it all amounts to a NOP for all the rest of you :-)

Sponsored by:   DARPA & NAI Labs.
2002-09-20 19:36:05 +00:00
phk
c0477d28f4 Don't use dkunit() to find out unit, we already have our softc pointer
where we can find it.

Don't call dkpart() just to print the result, it is constant.

Sponsored by:	DARPA & NAI Labs.
2002-09-20 16:25:16 +00:00
brooks
72b448e706 Make SCSI_DELAY setable at boot time and runtime via the
kern.cam.scsi_delay tunable/sysctl.

Reviewed by:	mdodd, njl
2002-09-02 20:10:19 +00:00
gibbs
fb0f9448fc Adjust scsi_calc_syncparam() to the exception table changing from 10ths to
100ths of ns.  This should correct a problem with camcontrol "ignoring"
requests to negotiate to slower speeds.
2002-08-26 17:13:35 +00:00
njl
d093261d0a Updates to cmd6workaround:
* Only update cdb in place if not CDB_POINTER
* Correctly check for QFRZ before restarting CCB
* More accurate printf message
* style(9) changes at end

Patch tested successfully on Maxtor 4 G120J6 GAK8.
2002-08-16 22:05:19 +00:00
njl
54a3d67ad2 Remove usage of cam_extend.c, replace with dev->si_drv1
PR:		kern/39809
Approved by:	gibbs
2002-08-15 20:54:03 +00:00
robert
237e4756df Correct spelling of 'supplied'.
PR: misc/39528
2002-06-19 20:44:48 +00:00
gibbs
de0f199372 Add the 160MHz syncrate to scsi_calc_syncrate() sync period exception table. 2002-06-05 19:10:57 +00:00
gibbs
aefa498e63 scsi_message.h:
Include PPR option bits defined in SPI4.

scsi_iu.h:
	Add data structures releated to parallel SCSI information units
	for use in SPI4 packetized protocol.
2002-06-05 19:05:01 +00:00
mjacob
845c7be0e8 Add REPORT LUNS basic infrastructure. 2002-06-04 17:41:47 +00:00
dillon
d3e6471535 PR: kern/38208
X-MFC after:	immediate w/ release eng approval.
2002-05-29 20:25:59 +00:00
dillon
c9f73458f0 Add a Quirk entry for the USB SimpleTech UCF-100 compact flash reader.
Note that even with the quirk entry the reader typically only works if
the USB device is recognized by UHCI instead of the generic OHCI driver.
2002-05-19 21:59:28 +00:00
marcel
084de53dc7 Remove unused static variable quantum. 2002-04-23 06:14:10 +00:00
ken
5d1a9608c2 Fix 3 of the four problems with my last indentation fix. ("fixing" the
fourth would be a divergence from the prevailing style.)

Thanks to bde for catching this.

Pointed out by:	bde
2002-04-01 05:41:33 +00:00
ken
7bf585a15e Fix an indentation problem. 2002-04-01 03:59:47 +00:00
phk
54392107ee DA (scsi) and AD (ata) diskdrivers:
Make the dump routine do just writing of data.
2002-03-31 22:28:03 +00:00
simokawa
0edcbc8d2f Automatically detect devices that do not support READ(6)/WRITE(6)
and upgrade to using 10 byte cdbs.

As far as I tested, this works efficiently for most of the
SBP-II/Firewire devices but most of the umass devices still need
ad-hoc work around because umass-sim doesn't return any SCSI errors.

A sysctl nob is also added for the last resort.
I hope we don't need DA_Q_NO_6_BYTE quirks anymore.

Reviewed by:	gibbs
MFC after:	1 week
2002-03-23 18:18:02 +00:00
alfred
e7a78af097 Remove __P. 2002-03-20 08:56:31 +00:00
phk
8a758b3a13 Mark some arguments __unused. 2002-03-11 08:04:59 +00:00
simokawa
0b19b34b12 Add support for Simplified Direct Access Device in scsi_op_desc(). 2002-03-11 03:08:17 +00:00
jhb
3706cd3509 Simple p_ucred -> td_ucred changes to start using the per-thread ucred
reference.
2002-02-27 18:32:23 +00:00
phk
8b5a71f365 GC: BIO_ORDERED going away. 2002-02-22 09:18:46 +00:00
simokawa
3396fcf863 - Add support for Simplified Direct Access Device, mostly for
Firewire/SBP-II devices.

- Add quirk for Logitec USB/Firewire HDD.

MFC after: 3 days.
2002-02-21 11:58:47 +00:00
mike
bcee06d42c o Move NTOHL() and associated macros into <sys/param.h>. These are
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
  source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
  Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
  POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
  and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
  complexities associated with having MD (asm and inline) versions, and
  having to prevent exposure of these functions in other headers that
  happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
  third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.

Tested on:	alpha, i386
Reviewed by:	bde, jake, tmm
2002-02-18 20:35:27 +00:00
bsd
ec225f53d2 Add NO_6_BYTE quirk entry for the LaCie Ltd. 105311 80 Gig USB2 drive.
Submitted by:	Brian Schellenberger <bts@babbleon.org>
2002-02-18 13:35:30 +00:00
phk
6be6d245a4 Remove spurious ';'
Obtained from:	~bde/sys.dif.gz
2002-02-10 21:36:13 +00:00
sobomax
17c3ef73cc Add support of PhotoClip USB Camera (http://www.myphotoclip.com):
- Vendor&Device IDs for USB product,
- quirk for SCSI CAM.

PR:		34481
Submitted by:	Olexander Kunytsa <kunia@x-telecom.net>
MFC in:		3 days
2002-01-31 11:39:17 +00:00
msmith
6d5a228d7f Define the kern.cam sysctl in the cam layer, rather than multiply in several
peripheral drivers.  Remove Ken's comment to the effect that this needed
to be done.

Staticise camnet_ih and cambio_ih.
2002-01-09 03:39:04 +00:00
msmith
5cfc4a9df0 Staticise a debugging variable.
Submitted by:	non
2002-01-09 03:37:16 +00:00
sobomax
b741551a21 Add quirk for DIVA USB Mp3 Player.
PR:		kern/33638
Submitted by:	Olexander Kunytsa <kunia@x-telecom.net>
MFC after:	3 days
		(pending re's approval)
2002-01-08 21:07:46 +00:00
kbyanc
fc0c999770 Extend Olympus E-100RS quirk to cover entire E series of digital cameras. 2002-01-07 03:32:56 +00:00
jedgar
32ba77b713 Add support for Nikon Coolpix E775 and E885 cameras.
PR:		33407 (E885)
Submitted by:	Brian Behlendorf <brian@hyperreal.org> (E885)
2002-01-01 13:28:43 +00:00
non
58ae9a63fd o Add KLD support for scsi_low.
o Add KLD dependency of ncv, nsp and stg drivers to scsi_low.

Submitted by: takawata
2001-12-15 12:32:23 +00:00
non
eaeb1aadee Remove PAO3 dependent part where I missed to remove at last commit. 2001-12-10 02:07:34 +00:00
iedowse
d9883ffb32 Add a NO_6_BYTE quirk for the D-series olympus digital cameras.
PR:		kern/31250
Submitted by:	Bryan Liesner <bleez@bellatlantic.net>
2001-12-09 21:38:33 +00:00
iedowse
fdfcd88d39 Back out 1.88 (NO_SYNC_CACHE quirk for Infortrend IFT-3102). Since
this device properly reports that the sync cache command is
unsupported, the bug is that we still complain about it on the
console.

Noticed by:	gibbs
2001-11-26 16:54:37 +00:00
mjacob
da12fd2ad3 Be very generous with timeouts for synchronize cache. We may wait a very long
time in the cases where it really sends the drive out to lunch, but it also
allows us to catch very wierd edge cases of strange drives that might take
a very long time (emulated disk drives over a network, e.g.).
2001-11-17 18:26:00 +00:00
iedowse
ee98411598 The Infortrend IFT-3102 multihost U2 SCSI to U2 SCSI controller
doesn't support the synchronise cache command.

PR:		kern/21752
Submitted by:	Nick R. Colakovic <nickc@corp.firstindustrial.com>
MFC after:	1 week
2001-11-17 17:43:06 +00:00
iedowse
52b49c49f7 Add quirk for Fujitsu M2513A MO drives. These drives hang at various
operations due to the synchronize cache command.

PR:		kern/21674
Submitted by:	W.Scholten <whs@xs4all.nl>
MFC after:	1 week
2001-11-17 14:46:22 +00:00