This is a prerequisite to allowing the use of hardware watchpoints for
userspace debuggers.
This is also a slight departure from the x86 behaviour, since `si_addr`
returns the data address that triggered the watchpoint, not the
address of the instruction that was executed. Otherwise, there is no
straightforward way for the application to determine which watchpoint
was triggered. Make a note of this in the siginfo(3) man page.
Reviewed by: jhb, markj (earlier version)
Tested by: Michał Górny (mgorny@gentoo.org)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28561
WITHOUT_LIBTHR has been broken for a little over five years now, since the
xz 5.2.0 update introduced a hard liblzma dependency on libthr, and building
a useful system without threading support is becoming increasingly more
difficult.
Additionally, in the five plus years that it's been broken more reverse
dependencies have cropped up in libzstd, libsqlite3, and libcrypto (among
others) that make it more and more difficult to reconcile the effort needed
to fix these options.
Remove the broken options.
PR: 252760
Reviewed by: brooks, emaste, kib
Differential Revision: https://reviews.freebsd.org/D28263
- Extend the list of main libraries of section 3
- Extend the library functions that are included in the libc
MFC after: 2 weeks
Submitted by: Naga Chaitanya Vellanki <pnagato at protonmail dot com>
Approved by: gbe
Differential Revision: https://reviews.freebsd.org/D26476
- In the initial description of si_addr, do not claim that it is
always the faulting instruction.
- For si_addr, document that it is generally set to the PC for
synchronous signals, but that it can be set to the the address of
the faulting memory reference for some signals including SIGSEGV and
SIGBUS. In particular, while SIGSEGV generally sets si_addr to the
faulting memory reference, SIGBUS can vary. On some platforms, some
SIGBUS signals set si_addr to the PC and other SIGBUS signals set
si_addr to the faulting address depending on the specific hardware
exception.
- For si_trapno, synchronous signals should set this to some value.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25777
AVL trees, red-black trees, and others. Weak AVL (wavl) trees are a
recently discovered member of that class. This change replaces
red-black rebalancing with weak AVL rebalancing in the RB tree macros.
Wavl trees sit between AVL and red-black trees in terms of how
strictly balance is enforced. They have the stricter balance of AVL
trees as the tree is built - a wavl tree is an AVL tree until the
first deletion. Once removals start, wavl trees are lazier about
rebalancing than AVL trees, so that removals can be fast, but the
balance of the tree can decay to that of a red-black tree. Subsequent
insertions can push balance back toward the stricter AVL conditions.
Removing a node from a wavl tree never requires more than two
rotations, which is better than either red-black or AVL
trees. Inserting a node into a wavl tree never requires more than two
rotations, which matches red-black and AVL trees. The only
disadvantage of wavl trees to red-black trees is that more insertions
are likely to adjust the tree a bit. That's the cost of keeping the
tree more balanced.
Testing has shown that for the cases where red-black trees do worst,
wavl trees better balance leads to faster lookups, so that if lookups
outnumber insertions by a nontrivial amount, lookup time saved exceeds
the extra cost of balancing.
Reviewed by: alc, gbe, markj
Tested by: pho
Discussed with: emaste
Differential Revision: https://reviews.freebsd.org/D25480
pthread_get_name_np() and pthread_set_name_np().
This re-applies r361770 after compatibility fixes.
Reviewed by: antoine, jkim, markj
Tested by: antoine (exp-run)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
for pthread_get_name_np() and pthread_set_name_np(), to be
compatible with Linux.
PR: 238404
Proposed and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
- Abbreviated month name in .Dd
- position of HISTORY section
- alphabetical ordering within SEE ALSO section
- adding .Ed before .Sh DESCRIPTION
- remove trailing whitespaces
- Line break after a sentence stop
- Use BSD OS macros instead of hardcoded strings
No .Dd bumps as there was no actual content change made
in any of these pages.
Submitted by: Gordon Bergling gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24591
Escape sequences like "\n" have to be escaped twice in examples in our
mdoc(7)-based manual pages in order to be displayed properly. The problem
is that otherwise they are interpreted by mdoc(7), which results in:
printf("parent: received '%s'0, buf);
being shown to the user instead of:
printf("parent: received '%s'\n", buf);
Approved by: bcr (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24056
The function allows to peek at the thread exit status and even see
return value, without joining (and thus finally destroying) the target
thread.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D23676
Add bit_ffs_area_at and bit_ffc_area_at functions for searching a bit
string for a sequence of contiguous set or unset bits of at least the
specified size.
The bit_ffc_area function will be used by the Intel ice driver for
implementing resource assignment logic using a bitstring to represent
whether or not a given index has been assigned or is currently free.
The bit_ffs_area, bit_ffc_area_at and bit_ffs_area_at functions are
implemented for completeness.
I'd like to add further test cases for the new functions, but I'm not
really sure how to add them easily. The new functions depend on specific
sequences of bits being set, while the bitstring tests appear to run for
varying bit sizes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: asomers@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22400
This provides a framework to define a template describing
a set of "variables of interest" and the intended way for
the framework to maintain them (for example the maximum, sum,
t-digest, or a combination thereof). Afterwards the user
code feeds in the raw data, and the framework maintains
these variables inside a user-provided, opaque stats blobs.
The framework also provides a way to selectively extract the
stats from the blobs. The stats(3) framework can be used in
both userspace and the kernel.
See the stats(3) manual page for details.
This will be used by the upcoming TCP statistics gathering code,
https://reviews.freebsd.org/D20655.
The stats(3) framework is disabled by default for now, except
in the NOTES kernel (for QA); it is expected to be enabled
in amd64 GENERIC after a cool down period.
Reviewed by: sef (earlier version)
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20477
and reinserting it back with an updated key.
This is one of dependencies for the upcoming stats(3) code.
Reviewed by: cem
Obtained from: Netflix
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D21786
to the traditional tree(3) RB trees, but using an array (preallocated,
linear chunk of memory) to store the tree.
This avoids allocation overhead, improves memory locality,
and makes it trivially easy to share/transfer/copy the entire tree
without the need for marshalling. The downside is that the size
is fixed at initialization time; there is no mechanism to resize
it.
This is one of the dependencies for the new stats(3) framework
(https://reviews.freebsd.org/D20477).
Reviewed by: bcr (man pages), markj
Discussed with: cem
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Obtained from: Netflix
Differential Revision: https://reviews.freebsd.org/D20324
This makes it possible to perform mathematical operations on
fractional values without using floating point. It operates on Q
numbers, which are integer-sized, opaque structures initialized
to hold a chosen number of integer and fractional bits.
For a general description of the Q number system, see the "Fixed Point
Representation & Fractional Math" whitepaper[1]; for the actual
API see the qmath(3) man page.
This is one of dependencies for the upcoming stats(3) framework[2]
that will be applied to the TCP stack in a later commit.
1. https://www.superkits.net/whitepapers/Fixed%20Point%20Representation%20&%20Fractional%20Math.pdf
2. https://reviews.freebsd.org/D20477
Reviewed by: bcr (man pages, earlier version), sef (earlier version)
Discussed with: cem, dteske, imp, lstewart
Sponsored By: Klara Inc, Netflix
Obtained from: Netflix
Differential Revision: https://reviews.freebsd.org/D20116
We don't split the other man pages in their own package so do the same for runtime.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20962
The description of CMSG_FIRSTHDR used two variables (mhdr and msg) to
reference the same thing. Use msghdr consistency across the manual page
instead.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17804
This basically adds makes use of the C99 restrict keyword, and also
adds some 'const's to four threading functions: pthread_mutexattr_gettype(),
pthread_mutexattr_getprioceiling(), pthread_mutexattr_getprotocol(), and
pthread_mutex_getprioceiling. The changes are in accordance to POSIX/SUSv4-2018.
Hinted by: DragonFlyBSD
Relnotes: yes
MFC after: 1 month
Differential Revision: D16722
The function retrieves the thread name previously set by
pthread_set_name_np(3). The name is cached in the process memory.
Requested by: Willem Jan Withagen <wjw@digiware.nl>
Man page update: Yuri Pankov <yuripv@yuripv.net>
Reviewed by: ian (previous version)
Discussed with: arichardson, bjk (man page)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16702
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
when to use assert, as well as providing a bad example of using
assert. While not strictly necessary, experience has shown issues
with poor assert choice happen often enough that this departure seems
warranted. Also, tighten up the previous example (there's no need
to have extra paragraphs or gratuitously long lines).
Reviewed by: emaste@ (earlier version)
It seems a shame to ruin the patina of the June 4, 1993 date
on abort.3, especially since it still matched the date of
the SCCS ID, but those are the rules.
Reported by: araujo
MFC after: 3 days
Sponsored by: Dell EMC
I didn't know abort2 existed until it was mentioned on a mailing list.
Mention it in related pages so others can find it easily.
MFC after: 3 days
Sponsored by: Dell EMC
