- Limit grabbing the lock to SIOCSIFFLAGS.
- Move ieee80211_start_all() to SIOCSIFFLAGS.
- Remove SIOCSIFMEDIA as it is not useful.
- Limit ether_ioctl to only SIOCGIFADDR. SIOCSIFADDR and SIOCSIFMTU have no
affect as there is no input/output path in the vap parent. The vap code
will handle the reinit of the mac address changes.
- Split off ndis_ioctl_80211 as it was getting too different to wired devices.
This fixes a copyout while locked and a lock recursion.
Reviewed by: sam
10/100 operation and place the mailbox registers at a different offset.
They also do not have an EEPROM, so the MAC address must be read from
NVRAM instead.
MFC after: 1 month
PR: kern/118975
Submitted by: benjsc, Thomas Nyström thn at saeab dot se
Submitted by: sephe (original patch for DragonflyBSD)
total of 6 interrupt resources for scc(4) on macio(4). This
is 3 per channel, of which the 1st of each channel is the
interrupt associated with the SCC. The other 2 are for DMA
operation.
Change scc_bfe_attach() to accept an argument that's the
number of interrupts per channel (ipc) and change each bus
front-end (bfe) to pass that argument through a wrapper
for the device_attach method.
For now, we only allocate the 1st interrupt of each channel
to perserve behaviour.
doesn't require parts of the Expansion ROM to be copied around,
for obtaining the MAC address on !OFW platforms.
- Don't unnecessarily cache bus space tag and handle nor RIDs
in the softcs of the front-ends.
- Don't use function calls in initializers.
- Let the SBus front-end depend on sbus(4).
when creating the parent bus DMA tag. While at it correct the style
and a nearby comment.
- Take advantage of m_collapse(9) for performance reasons.
MFC after: 2 weeks
PR 122839 is fixed in both em and in igb
Second, the issue on building modules since the static kernel
build changes is now resolved. I was not able to get the fancier
directory hierarchy working, but this works, both em and igb
build as modules now.
Third, there is now support in em for two new NICs, Hartwell
(or 82574) is a low cost PCIE dual port adapter that has MSIX,
for this release it uses 3 vectors only, RX, TX, and LINK. In
the next release I will add a second TX and RX queue. Also, there
is support here for ICH10, the followon to ICH9. Both of these are
early releases, general availability will follow soon.
Fourth: On Hartwell and ICH10 we now have IEEE 1588 PTP support,
I have implemented this in a provisional way so that early adopters
may try and comment on the functionality. The IOCTL structure may
change. This feature is off by default, you need to edit the Makefile
and add the EM_TIMESYNC define to get the code.
Enjoy all!!
assumptions about the state of the cooling devices. Instead, switch them
off on init and, only after that, we are in TZ_ACTIVE_NONE.
Submited by: Andriy Gapon <avg at icyb.net.ua>
Reviewed by: njl
o Add CTASSERTs ensuring that HME_NRXDESC and HME_NTXDESC are set to
legal values.
o Use appropriate maxsize, nsegments and maxsegsize parameters when
creating DMA tags and correct some comments related to them.
o The FreeBSD bus_dmamap_sync(9) supports ored together flags for quite
some time now so collapse calls accordingly.
o Add missing BUS_DMASYNC_PREREAD when syncing the control DMA maps in
hme_rint() and hme_start_locked().
o Keep state of the link state and use it to enable or disable the MAC
in hme_mii_statchg() accordingly as well as to return early from
hme_start_locked() in case the link is down.
o Introduce a sc_flags and use it to replace individual members like
sc_pci.
o Add bus_barrier(9) calls to hme_mac_bitflip(), hme_mii_readreg(),
hme_mii_writereg() and hme_stop() to ensure the respective bit
has been written before we starting polling on it and for the right
bits to change.
o Rather just returning in case hme_mac_bitflip() fails and leaving us
in an undefined state report the problem and move on; chances are
the requested configuration will become active shortly after.
o Don't call hme_start_locked() in hme_init_locked() unconditionally
but only after calls to hme_init_locked() when it's appropriate, i.e.
in hme_watchdog().
o Add a KASSERT which asserts nsegs is valid also to hme_load_txmbuf().
o In hme_load_txmbuf():
- use a maximum of the newly introduced HME_NTXSEGS segments instead
of the incorrect HME_NTXQ, which reflects the maximum TX queue
length, for loading the mbufs and put the DMA segments back onto
the stack instead of the softc as 16 should be ok there.
- use the common errno(2) return values instead of homegrown ones,
- given that hme_load_txmbuf() is allowed to fail resulting in a
packet drop for quite some time now implement the functionality of
hme_txcksum() by means of m_pullup(9), which de-obfuscates the code
and allows to always retrieve the correct length of the IP header, [1]
- also add a KASSERT which asserts nsegs is valid,
- take advantage of m_collapse(9) instead of m_defrag(9) for
performance reasons.
o Don't bother to check whether the interface is running or whether its
queue is empty before calling hme_start_locked() in hme_tint(), the
former will check these anyway.
o In hme_intr() call hme_rint() before hme_tint() as gem_tint() may
take quite a while to return when it calls hme_start_locked().
o Get rid of sc_debug and just check if_flags for IFF_DEBUG directly.
o Add a shadow sc_ifflags so we don't reset the chip when unnecessary.
o Handle IFF_ALLMULTI correctly. [2]
o Use PCIR_BAR instead of a homegrown macro.
o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN].
o Use the maximum of 256 TX descriptors for better performance as using
all of them has no additional static cost rather than using just half
of them.
Reported by: rwatson [2]
Suggested by: yongari [1]
Reviewed by: yongari
MFC after: 1 month
in order to get rid of bus space handle and tag in struct sym_hcb.
- Remove unused members related to bus addresses in struct sym_hcb.
- sym(4) takes care of allocating an instance of struct sym_hcb
itself so don't let newbus allocate it as an unused softc also.
- Add basic MPSAFE locking. This includes changing the sym(4) CCBs
to be allocated up-front instead of on demand as needed. Besides
making these allocations more likely to succeed, this also solves
the problem of calling bus_dmamap_create(9) with the SIM mutex
held.
Reviewed by: scottl
MFC after: 1 month
- Remove superfluous returns in functions returning void.
- In sym_alloc_lcb_tags() return directly instead of jumping
to a label which just returns.
- Fix some spelling in comments.
- Remove trailing whitespace.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral). Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.
Supported by: Hobnob and Marvell
Reviewed by: many
Obtained from: Atheros (some bits)
So if we have channel 0..3 devclass_get_maxunit is 4.
It's never been a problem as devclass_get_device() has
catched a possibly bad input.
Discussed with: scottl
deserves its own internet memes). The trick is to force all available,
unused pins (that being advertised as "speaker") to behave as microphone
pins instead.
Reported / Tested by: Dmitry Kutsenko <kutsenko.truebsd.org>
MFC after: 3 days
move most offload functionality from NIC to TOE
factor out all socket and inpcb direct access
factor out access to locking in incpb, pcbinfo, and sockbuf
as the former is becoming deprecated and exhibits some extraneous
Giant-locking. The new callout(9) is declared MPSAFE, so it may
improve concurrency.
Tested by: matteo
Silence from: wpaul
MFC after: 1 month
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.
This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.
MFC after: 3 months
Tested by: kris (superset of committered patch)
This avoids calling busdma in the request processing path which caused a traumatic performance degradation.
Allocation has be postponed to after we know how many devices we possible can have on portmulitpliers to save some space.
clearing MSI enable bit for MSI capable hardwares resulted in Tx
problems. MSI enable bit is set only when MSI is requested from
user.
Tested by: remko
