- Add preliminary support for the Realtek RTL8188EUS and RTL8188ETV chipsets.
- Add device ID for 'Sanoxy 802.11N' USB
- Initialize rssi variable.
- Fix gcc build, initialize off variable.
- The DELAY() should not be used in USB drivers.
- The usb_pause_mtx() function takes ticks and not milliseconds as last argument.
USB endpoints are almost always single-digits, fix the path in the man
page to be clearer.
PR: docs/175560
Submitted by: Andreas Gustafsson <gson gson.org>
Add support for event timers whose clock frequency can change while running.
Apparently all ARM configs build kern_et.c, but only a few of them also
build kern_clocksource.c, un-break the build by not referencing functions in
kern_clocksource if NO_EVENTTIMERS is defined.
Add variable-frequency support to the arm mpcore eventtimer driver.
mpcore_timer: Disable the timer and clear any pending bit, then setup the
new counter register values, then restart the timer. Also re-nest the parens
properly for casting the result of converting time and frequency to a count.
The ADC has a 12bit resolution and its raw output can be read via sysctl(8)
interface.
The driver allows the setup of ADC clock, samples average and open delay
(the number of clock cycles to wait before start the conversion).
The TSC_ADC module is set in the general purpose mode (no touchscreen
support).
Tested on Beaglebone-black.
Written based on AM335x TRM.
Integrate device-tree upstream files into the build process:
(1) Invoke cpp to bring in files via #include (although the old
/include/ stuff is supported still).
(2) bring in files from either vendor tree or freebsd-custom files
when building.
(3) move all dts* files from sys/boot/fdt/dts to
sys/boot/fdt/dts/${MACHINE} as appropriate.
(4) encode all the magic to do the build in sys/tools/fdt/make_dtb.sh
so that the different places in the tree use the exact same logic.
(5) switch back to gpl dtc by default. the bsdl one in the tree has
significant issues not easily addressed by those unfamiliar with
the code.
Only try to build the static dtb when we're building a static dtb.
Use proper include path for dtc as well as cpp.
Fix syntax errors (missing ; other minor glitches) in existing dts files.
r265194, r265197
r260522:
Add the manual page for geom_uncompress(4).
r260523:
Build the geom_uncompress(4) module by default.
Fix geom_uncompress(4) module loading. Don't link zlib.c (which is a module
itself) directly.
r261439:
Remove some unnecessary code. The offsets read from the first block are
overwritten a few lines bellow.
r261440:
Fix a logic error. Because of this inflateReset() wasn't being called and
the output buffer wasn't being cleared between the inflate() calls,
producing zeroed output after the first inflate() call.
This fixes the read of mkuzip(8) images with geom_uncompress(4).
r261586:
Fix the build with DEBUG enabled. Where possible, fix style(9) issues.
r264504:
Make sure not to do I/O for more than MAXPHYS bytes. Doing so can cause
problems in our providers, such as a KASSERT in md(4). We can initiate
I/O for more than MAXPHYS bytes if we've been given a BIO for MAXPHYS
bytes, the blocks from which we're reading couldn't be compressed and
we had compression in preceeding blocks resulting in misalignment of
the blocks we're trying to read relative to the sector. We're forced to
round up the I/O length to make it an multiple of the sector size.
When we detect the condition, we'll reduce the block count and perform
a "short" read. In g_uzip_done() we need to consider the original I/O
length and stop early if we're about to deflate a block that we didn't
read. By using bio_completed in the cloned BIO and not bio_length to
check for this, we automatically and gracefully handle short reads that
our providers may be doing on top of the short reads we may initiate
ourselves.
r264769:
Keep geom_uncompress(4) in line with geom_uzip(4), bring in the r264504 fix.
Make sure not to start I/O bigger than MAXPHYS bytes.
r265193:
Some style and whitespace fixes. Reduce the difference between geom_uzip(4)
and geom_uncompress(4). Now, they produce an almost clean diff(1) output.
Remove a duplicated variable from g_uncompress.c and an unnecessary header
from g_uzip.c.
r265194:
Actually the FEATURE() macro is defined on sys/sysctl.h.
r265197:
Fix a leak in g_uzip_taste(). After retrieve all the block offsets from
the uzip image, free the last data read.
r261844, r261845, r261846, r262194, r262522, r262559
r258046:
Fix a typo on a comment in ofw_bus_if.m, the default method will return -1
when a node doesn't exist.
r258047:
Move the KASSERT() check to the point before the increase of number of pins.
r258050:
Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so
it can be overriden by its OFW/FDT version.
Give a chance for GPIO devices that implement the device_identify method to
attach.
r259035:
Remove unnecessary includes and an unused softc variable. While here apply
two minor style(9) fixes.
r259036:
Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4)
control callback function. This makes gpioled(4) works even if the pin
is accidentally set to an input.
r259037:
Fix the pin value reading on AM335x. Because of the inverted logic it was
always returning '0' for all the reads, even for the outputs. It is now
known to work with gpioiic(4) and gpioled(4).
r261842:
Add an OFW GPIO compatible bus. This allows the use of the DTS files to
describe GPIO bindings in the system.
Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between
the OFW and the non OFW versions of GPIO bus.
Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus.
r261843:
Add OFW support to the in tree gpio compatible devices: gpioiic(4) and
gpioled(4).
Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for
the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx)
used as reference for a non OFW-based system.
Update the gpioled(4) and gpioiic(4) man pages with some details and
examples about the FDT/OFW support.
Some compatibility details pointed out by imp@ will follow in subsequent
commits.
r261844:
Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems.
This change makes ofw_iicbus attach to iicbb(4) controllers in addition to
the already supported i2c host bridges (iichb).
On iicbb(4) allow the direct access of the OFW parent node by its children,
so they can be directly attached to iicbb(4) node on the DTS without the
need of describing the i2c bus.
r261845:
Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this
change the gpio children can be described as directly connected to the GPIO
controller without the need of describing the OFW GPIO bus itself on the
DTS file.
With this commit the OFW GPIO bus is fully functional on BBB and RPi.
GPIO controllers which want to use the OFW GPIO bus will need similar
changes.
r261846:
Make the gpioled(4) work out of the box on BBB.
Add gpioled(4) to BEAGLEBONE kernel and add the description of the four
on-board leds of beaglebone-black to its DTS file.
r262194:
Remove an unnecessary header.
r262522:
Fix make depend for iicbus.
r262559:
Inspired by r262522, fix make depend. This fixes the build of gpio modules.
Adds gpioiic.4 and gpioled.4 man pages. Moves some of the information that
was previously available on gpio.4 to their respectives pages. Add the
cross references on gpioctl.8.
Add gpiobus(4) as a link to gpio(4).
dd mrsas(4) driver from LSI official support of newer MegaRAID SAS
cards. LSI has been maintaining this driver outside of the FreeBSD
tree. It overlaps support of ThunderBolt and Invader cards that mfi(4)
supports. By default mfi(4) will attach to cards. If the tunable:
hw.mfi.mrsas_enable=1
is set then mfi(4) will not probe and attach to these newer cards and
allow mrsas(4) to attach. So by default this driver will not effect
a FreeBSD system unless mfi(4) is removed from the kernel or the
tunable is enabled.
mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices
show up as /dev/daX. mfiutil(8) does not work with mrsas. The FreeBSD
version of MegaCli and StorCli from LSI do work with mrsas. It appears
that StorCli only works with mrsas. MegaCli appears to work with mfi(4)
and mrsas(4).
It would be good to add mfiutil(4) support to mrsas, emulations modes,
kernel logging, device aliases to ease the transition between mfi(4)
and mrsas(4).
Style issues should be resolved by LSI when they get committers approved.
The plan is get this driver in FreeBSD 9.3 to improve HW support.
Thanks to LSI for developing, testing and working with FreeBSD to
make this driver co-exist in FreeBSD. This improves the overall
support of MegaRAID SAS.
Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com>
Sponsored by: LSI
Modify Copyright information and other strings to reflect
Qlogic Corporation's purchase of Broadcom's NetXtreme business.
Added clean option to Makefile
Submitted by:David C Somayajulu (davidcs@freebsd.org) QLogic Corporation
Make the HARDWARE section ready for release notes generation; sort SEE ALSO.
Compared to the original revision, the list of supported chipsets was changed to
reflect those supported in this branch.
Make this manpage ready for hardware notes generation, add more Xrefs and perform
general cleanup.
In particular, don't claim rsu(4) devices can be configured with hostname(1)...
r263317:
cxgbe(4): significant rx rework.
- More flexible cluster size selection, including the ability to fall
back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in
case an allocation of a larger size fails.
- A single get_fl_payload() function that assembles the payload into an
mbuf chain for any kind of freelist. This replaces two variants: one
for freelists with buffer packing enabled and another for those without.
- Buffer packing with any sized cluster. It was limited to 4K clusters
only before this change.
- Enable buffer packing for TOE rx queues as well.
- Statistics and tunables to go with all these changes. The driver's
man page will be updated separately.
r263412:
cxgbe(4): if_iqdrops statistic should include tunnel congestion drops.
r263451:
cxgbe(4): man page updates.
This includes r265236, r265237, r265241 and r265261:
------------------------------------------------------------------------
r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
------------------------------------------------------------------------
------------------------------------------------------------------------
r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines
Add the mpr(4) man page to the man4 Makefile.
This should have been included in r265236.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Sponsored by: LSI, Spectra Logic
------------------------------------------------------------------------
------------------------------------------------------------------------
r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines
Use our standard SYNOPSIS wording; perform some cleanup while here.
------------------------------------------------------------------------
------------------------------------------------------------------------
r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines
Add a missing colon.
------------------------------------------------------------------------
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
- Add the Asus USB-N10 NANO [1]
- Fix panic by adding mtx_assert() to urtwn_init_locked() and
urtwn_stop_locked() [2]
Tested by: Kuan-Chung Chiu <buganini@gmail.com> [1]
Anthony Jenkins <scoobi_doo at yahoo dot com> [2]
r264010: Support speeds up to 12mbaud on newer chips.
r264031: Use 2K IO buffers for improved throughput.
r264149: Add ioctl(2) calls to access bitbang, MPSSE, CPU_FIFO,
and other modes.
Add Tx/Rx multiqueue support to vmx(4)
As a prerequisite for multiple queues, the guest must have MSIX enabled.
Unfortunately, to work around device passthrough bugs, FreeBSD disables
MSIX when running as a VMWare guest due to the hw.pci.honor_msi_blacklist
tunable; this tunable must be disabled for multiple queues.
Also included is various minor changes from the projects/vmxnet branch.
MFC r264865
Update the date that was missed in r263259
- r258014 Document WITH_TESTS src.conf(5) option.
- r263089 Fix description of WITHOUT_BMAKE's purpose.
- r264408 Fix test suite name in src.conf(5).
- r264410 Document how to install the test suite.
- r264412 Add FreeBSD 10.1 to the list of recognized releases for Fx.
- r264413 Miscellaneous fixes to tests(7).
Remove support of LUN-based CD changers from cd(4) driver.
This code was heavily broken few months ago during CAM locking changes.
Fixing it would require almost complete rewrite. Since there are no
known devices on market using this interface younger then ~15 years, and
they are CD, not even DVD, I don't see much reason to rewrite it.
This change does not mean those devices won't work. They will just work
slower due to inefficient disks load/unload schedule if several LUNs
accessed same time.
- r263161 Make bsd.test.mk the only public mk fragment for the building of tests.
- r263172 Move FreeBSD Test Suite-specific code to a suite.test.mk file.
- r263204 Add some documentation for bsd.test.mk.
- r263217 Document support for TAP-compliant Perl test programs.
This is "make tinderbox" clean.
Add SRC_UPDATE_SKIP, DOC_UPDATE_SKIP, and PORTS_UPDATE_SKIP
variables. These are intended to allow bypassing the
'svn co /usr/{src,doc,ports}' step in the chroot when the
tree exists from external means.
The use case here is that /usr/src, /usr/doc, and /usr/ports
in the chroot exist as result of zfs dataset clones, so it
is possible (and happens quite often) that the included
distributions may not be consistent. (This is not the case
for -RELEASE builds, but does happen for snapshot builds.)
Sponsored by: The FreeBSD Foundation
Add a SUBDIR_PARALLEL option to bsd.subdir.mk, to allow make to process
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC r263833:
Enable parallel building for gnu/usr.bin and usr.bin/clang too.
r264027:
Add a new release build variable, WITH_COMPRESSED_IMAGES.
When set to a non-empty value, the installation medium is
compressed as part of the 'install' target in the release/
directory.
r264028:
Clean up trailing whitespace in release/Makefile.
r264029:
Fix logic error.
r264030:
If WITH_COMPRESSED_IMAGES is set, add the compressed images
to the CLEANFILES list.
r264046:
Use xz(1) instead of gzip(1) to compress release images
when WITH_COMPRESSED_IMAGES is used.
r264073:
Allow overriding xz(1) path.
Sponsored by: The FreeBSD Foundation
r262810:
Merge enabling building FreeBSD/arm images as part of the
release build process.
r262862:
Provide backwards-compatibility with release.conf SVNROOT
entries that do not have a trailing '/'.
r264105:
Add ZEDBOARD support for release builds.
* Local modifications:
- Set SRCBRANCH from head/ to stable/10/.
- Strip svn:merginfo from ^/projects/release-embedded to avoid
pollution.
Sponsored by: The FreeBSD Foundation
share/man/man7/tests.7
Added a section on test suite configuration, and cleaned up up grammar
errors and awkward prose. The config variables were discussed on
freebsd-testing.
