- Mention option's arguments in the list of options (so that now we mention
"-N system" instead of just "-N").
- Stylize signals and other constants like O_APPEND with Dv.
- Sort options.
- Change indentation width for readability.
- Fix a couple of typos.
- Sort symbols list.
- Use Sy instead of Cm for symbols. They are not command modifiers.
- Use Ex -std in the EXIT STATUS section for consistency with other manual
pages.
- Use Ql instead of Dq Li for inline code examples as Li has recently been
deprecated by mdoc.
Reviewed by: bcr
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25332
- Update synopsis to present all available arguments.
- Consistently call the argument specifying an arbitrary directory a
"directory".
- Do not put macros into -width argument to Bl. They do not expand there.
- Stylize command modifiers like "daily" with Cm instead of Pa. While
technically periodic(8) operates on directories with such names, it is
confusing from the perspective of the manual page reader as Pa and Ar are
stylized the same way. Also, I cannot recall a single manual page where
Pa would be used to describe the syntax of command-line arguments.
MFC after: 2 weeks
* Add pretty small EXAMPLES section
* While here, fix a warning in line 98 (new sentence in new line)
Approved by: bcr@
Differential Revision: https://reviews.freebsd.org/D25205
It is plausible that the hardware interrupts a host only when GIS goes
from zero to one. GIS is formed by OR-ing multiple hardware statuses,
so it's possible that a previously cleared status gets set again while
another status has not been cleared yet. Thus, there will be no new
interrupt as GIS always stayed set. If we don't re-examine GIS then we
can leave it set and never get another interrupt again.
Without this change I frequently saw a problem where snd_hda would stop
working. Setting dev.hdac.1.polling=1 would bring it back to life and
afterwards I could set polling back to zero. Sometimes the problem
started right after a boot, sometimes it happened after resuming from
S3, frequently it would occur when sound output and input are active
concurrently (such as during conferencing). I looked at HDAC_INTSTS
while the sound was not working and I saw that both HDAC_INTSTS_GIS and
HDAC_INTSTS_CIS were set, but there were no interrupts.
I have collected some statistics over a period of several days about how
many loops (calls to hdac_one_intr) the new code did for a single
interrupt:
+--------+--------------+
|Loops |Times Happened|
+--------+--------------+
|0 |301 |
|1 |12857746 |
|2 |280 |
|3 |2 |
|4+ |0 |
+--------+--------------+
I believe that previously the sound would get stuck each time we had to loop
more than once.
The tested hardware is:
hdac1: <AMD (0x15e3) HDA Controller> mem 0xfe680000-0xfe687fff at device 0.6 on pci4
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
No objections: mav
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D25128
module from that file into ffs_vfsops.c. This fixes the build for kernel
configs that don't include FFS.
PR: 247256
Submitted by: glebius
Reviewed by: mckusick (earlier version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25285
- Sort options in the list & indent for readability.
- Pet linters
- Use "\(em" instead of "--"
- Remove Tn macros
- Use Ql instead of Dq Li
- Add arguments to the -M, -N, -p, and -u options in their descriptions.
- Use Sy instead of Li for field names. Li is deprecated, and Ql makes no
sense here.
- Replace a literal block with a list for the table of special names
related to FD.
- Use Ql instead of ``X''.
- Add a dot after etc.
- Reference fuser(1).
MFC after: 1 week
one place where we now need to multiply the size of the struct with the
number of entries. This lead to problems when restarting user space
daemons, as the cleanup was never properly done, resulting in MRT_ADD_VIF
EADDRINUSE.
Properly zero all array elements to avoid this problem.
PR: 246629, 206583
Reported by: (many)
MFC after: 4 days
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
we'll panic on an assertion.
While here, leave a comment that the ifp was never protected and stable
(as glebius pointed out) and this needs to be fixed properly.
Discovered while working on: PR 246629
Reviewed by: glebius
MFC after: 4 days
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
- Support Prefetchable Memory.
- Use the correct rman when allocating memory and ioports.
- Translate PCI addresses in bus_alloc_resource to allow physical
addresses that are different than pci addresses.
Reviewed by: Robert Crowston <crowston_protonmail.com>
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25121
These macro definitions are no longer needed as the NFS OSX port is long
dead. The vfs_statfs macro conflicts with the vfsops field of the same
name.
Submitted by: shivank@
Reviewed by: rmacklem
MFC after: 2 weeks
Sponsored by: Google, Inc. (GSoC 2020)
Differential Revision: https://reviews.freebsd.org/D25263
o Parse the ACPI DSD (Device Specific Data) graph property and record
device connections.
o Split-out FDT support to a separate file.
o Get the corresponding (FDT/ACPI) Coresight platform data in
the device drivers.
Sponsored by: DARPA, AFRL
Add a header definition for DCCP as defined in RFC4340. This header definition
is required to perform validation when receiving and forwarding DCCP packets.
We do not currently support DCCP.
Reviewed by: gallatin, bz
Approved by: bz (co-mentor)
MFC after: 1 week
MFC with: 350749
Differential Revision: https://reviews.freebsd.org/D21179
Changes in the mbuf layout regarding HW TLS, resulted in wrong detection
of starting mbuf. Use a boolean variable to handle this and pass m_adj()
the top mbuf, so that the packet header is adjusted correctly.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure we disable the multicast filter in promiscious mode aswell as when
the all multicast flag is set.
MFC after: 1 week
Found by: Tycho Nightingale <tychon@freebsd.org>
Sponsored by: Mellanox Technologies
Inject \e[J to erase the initial loader screen. We have two options,
find where out cursor is and use BIOS scroll for data from boot2 or erase the
display and start from origin. Erasing the screen is easier and we also
get the screen buffer initialized.
Sponsored by: Netflix, Klara Inc.
There may be some version of mountd out there that does not supply a default
security flavor when none is given for an export.
Set the default security flavor in vfs_export if none is given, and remove the
workaround for oexport compat.
Reported by: npn
Reviewed by: rmacklem
Approved by: mav (mentor)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25300
This makes old ldd to still work on newer tagged PIE binaries.
Also move debug line for hashes before both decisions to not load are
done, so that the end of digest_dynamic() processing and reason to not
load or load is seen in debug trace.
Noted by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Which makes all calls to load_object() to observe the flag, except the
calls for preloaded DSOs.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The arguments for VFS_CHECKEXP() were changed by r362158.
Also, the numsecflavors and secflavors arguments were not documented,
so add these as well.
This is a content change.
Previously, it used atoi(3) to parse the unit parameter, which would silently
yield a unit of 0 in the presence of an invalid unit number. As most users of
mpsutil(8) are likely to have at least a unit 0, this is could have confusing
results.
This behaviour was particularly unintuitive if one incorrectly passed an
adapter device name, or a device path, instead of a unit number. In addition
to using strtoumax(3) instead of atoi(3) to parse unit numbers, support
stripping a device name (e.g. mps1) or path (e.g. /dev/mps2) to just its unit
number.
Reviewed by: scottl (earlier version)
Compiling on a RISC-V system fails with 'relocation R_RISCV_ALIGN
requires unimplemented linker relaxation; recompile with -mno-relax'.
Our default linker (ld.lld) doesn't support relaxation, so default to
no-relax so we don't generate object files the linker can't handle.
Reviewed by: mhorne
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D25210
packet drill script was failing with a number of unexpected acks. So it turns
out if you have the default recvwin set up to 1Meg (like OCA's do) and you
have no window scaling (like the dupack checking code) then we have another
case where we are always trying to update the rwnd and sending an
ack when we should not.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D25298
Currently newsyslog supports <include> directive that is used
in our default /etc/newsyslog.conf in the following form:
<include> /usr/local/etc/newsyslog.conf.d/*
While this is suitable for ports installing their own rules
for logs rotation, this also makes newsyslog break entire
processing of all files if it encounters single line it cannot parse.
This includes lines referring to nonexistent username/group for log
ownership, so newsyslog stops calling errx() function in the parser.
With this fix, newsyslog uses warnx() instead of errx() in such cases
to print a warning, recover gracefully and continue with execution.
Among other cases, this unbreaks initial creation of log files
having flag "C" at boot time (newsyslog -CN). This is most important
for systems having RAM-based /var file system like nanobsd(8)-based
that rely on newsyslog to bring system log files into existence.
MFC after: 1 month
When doing secure boot, loader wants to export loader.ve.hashed
the value of which typically exceeds KENV_MVALLEN.
Replace use of KENV_MVALLEN with tunable kenv_mvallen.
Add getenv_string_buffer() for the case where a stack buffer cannot be
created and use uma_zone_t kenv_zone for suitably sized buffers.
Reviewed by: stevek, kevans
Obtained from: Abhishek Kulkarni <abkulkarni@juniper.net>
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D25259
