- make abday, day, abmon, mon, am_pm output quoting match linux
- workaround localeconv() issue for mon_grouping and grouping (PR172215)
- for other values not available in default locale, output -1 instead of
127 (CHAR_MAX) as returned by localeconv()
With these changes, output of `locale` and `locale -k` for all keywords
specified by POSIX exactly matches the linux one.
PR: 237752
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D21599
All of these are defined as mandatory by POSIX.
While here, mark all non-standard ones as FreeBSD-only as
other systems (at least, GNU/Linux and illumos) do not handle
them, so we should not encourage their use.
PR: 237752
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D21490
In FreeBSD 11 along with the rework on the collation, mklocale(1) and colldef(1)
has been replaced by localedef(1) (a note has been added to the manpage to state
it).
mklocale(1) and colldef(1) has been kept around to be able to build older
versions of FreeBSD. None of the version requiring those tools are supported
anymore so it is time to remove them from base
o Do not run any iconv() processing in -a. The locale of root user is not
what is desired by most of the users who receive their calendar mail.
Just assume that users store their calendars in a format that is readable
to them. This fixes regression from r344340.
o fork() and setusercontext(LOGIN_SETALL) for every user. This makes LANG
set inside a calendar file mostly excessive, as we will pick up user's
login class LANG.
o This also executes complex function cal() that parses user owned files
with appropriate user privileges.
Previously it was run with privileges dropped only temporary for execution
of cal(), and fully dropped only before invoking sendmail (see r22473).
Reviewed by: bapt (older version of patch)
patch by espie@
replace sloppy parsing of numeric values with strtonum (incr, decr, divert)
still use integers, so use the natural bounds for these.
POSIX says m4 should error when these use non numeric values, and now they
do.
okay millert@
Obtained from: OpenBSD
by espie@
ifelse is special, fix argv parsing to avoid segfault
problem noticed by Matthew Green (netbsd), slightly different fix
so that argc counting makes more sense.
we might want to warn on wrong number of parameters later, but this is
somewhat inconsistent depending on the builtin right now.
okay millert@
Obtained from: OpenBSD
Add -E flag (make warnings fatal), following the behavior of GNU m4 1.4.9+
Help and direction millert@ espie@ anton@ deraadt@
ok espie@
Obtained from: OpenBSD
To remain compatible with GNU patch, we should ensure that once we're
removing empty files after a reversed /dev/null patch we don't remove files
that have been modified. GNU patch leaves these intact and just reverses the
hunk that created the file, effectively implying --remove-empty-files for
reversed /dev/null patches.
All of them are needed to be able to boot to single user and be able
to repair a existing FreeBSD installation so put them directly into
FreeBSD-runtime.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21503
Summary:
- basic: test application of patches created by diff -u at the
beginning/middle/end of file, which have differing amounts of context
before and after chunks being added
- limited_ctx: stems from PR 74127 in which a rogue line was getting added
when the patch should have been rejected. Similar behavior was
reproducible with larger contexts near the beginning/end of a file. See
r326084 for details
- file_creation: patch sourced from /dev/null should create the file
- file_nodupe: said patch sourced from /dev/null shouldn't dupe the contents
when re-applied (personal vendetta, WIP, see comment)
- file_removal: this follows from nodupe; the reverse of a patch sourced
from /dev/null is most naturally deleting the file, as is expected based
on GNU patch behavior (WIP)
Some of the procstat tests start a program "while1" and examine the process
using procstat, but did not wait properly for it to start (kill -0 will
succeed immediately after the child process has been created).
Instead, have "while1" write something when it starts, and use a fifo to
wait for that.
PR: 233587, 233588
Reviewed by: ngie
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21519
These will be expanded later as I come up with good test cases; for now,
these seem to be enough to trigger bugs in base gnugrep and expose missing
features in bsdgrep.
The libxo xml feature of adding an annotation with the "original"
address from the utmpx file if it is different than the final "from"
field was broken by r351379. This was pointed out by the gcc error
that save_p might be used uninitialized. Save the original address
as needed in each entry, don't just use the last one from the previous
loop.
Reviewed by: marcel@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21390
Ouput format of last(1) is broken for non UTF-8 locales
since it got libxo(3) support. It uses strftime(3) that produces
non UTF-8 strings passed to xo_emit(3) with wrong %s format -
it should be %hs in this case, so xo_emit(3) produces empty output.
This change is basically no-op when locale is of UTF-8 type,
f.e. en_GB.UTF-8 or ru_RU.UTF-8 or sr_RS.UTF-8@latin.
It fixes output for other locales.
MFC after: 2 weeks
After r351379 save_p may be used uninitialized. Set it to NULL before
first assignment so that a later NULL check will work correctly.
Reported by: CI system for gcc platforms
MFC after: 1 week
X-MFC with: 351379 (karels)
It's nice to be able to display a full IPv6 host address if
needed, but it's also nice to display more than 3 characters of a command
line. Compute the needed size for the FROM column in an earlier pass,
and determine the maximum, then print what fits for the command.
Reviewed by: marcel@ (markm@ previous revision)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21211
On arm64, riscv, and s390x disable building of aout components.
This allows gprof to build on these architectures which never supported
the legacy a.out binary format.
Obtained from: s390x branch
MFC after: 3 months
The Zstd format bumps the CLOOP major number to 4 to avoid incompatibility
with older systems. Support in geom_uzip(4) is conditional on the ZSTDIO
kernel option, which is enabled in amd64 GENERIC, but not all in-tree
configurations.
mkuzip(8) was modified slightly to always initialize the nblocks + 1'th
offset in the CLOOP file format. Previously, it was only initialized in the
case where the final compressed block happened to be unaligned w.r.t.
DEV_BSIZE. The "Fake" last+1 block change in r298619 means that the final
compressed block's 'blen' was never correct unless the compressed uzip image
happened to be BSIZE-aligned. This happened in about 1 out of every 512
cases. The zlib and lzma decompressors are probably tolerant of extra trash
following the frame they were told to decode, but Zstd complains that the
input size is incorrect.
Correspondingly, geom_uzip(4) was modified slightly to avoid trashing the
nblocks + 1'th offset when it is known to be initialized to a good value.
This corrects the calculated final real cluster compressed length to match
that printed by mkuzip(8).
mkuzip(8) was refactored somewhat to reduce code duplication and increase
ease of adding other compression formats.
* Input block size validation was pulled out of individual compression
init routines into main().
* Init routines now validate a user-provided compression level or select
an algorithm-specific default, if none was provided.
* A new interface for calculating the maximal compressed size of an
incompressible input block was added for each driver. The generic code
uses it to validate against MAXPHYS as well as to allocate compression
result buffers in the generic code.
* Algorithm selection is now driven by a table lookup, to increase ease of
adding other formats in the future.
mkuzip(8) gained the ability to explicitly specify a compression level with
'-C'. The prior defaults -- 9 for zlib and 6 for lzma -- are maintained.
The new zstd default is 9, to match zlib.
Rather than select lzma or zlib with '-L' or its absense, respectively, a
new argument '-A <algorithm>' is provided to select 'zlib', 'lzma', or
'zstd'. '-L' is considered deprecated, but will probably never be removed.
All of the new features were documented in mkuzip.8; the page was also
cleaned up slightly.
Relnotes: yes
While here:
- Remove deprecated Tn macros.
- Do not use macros with the -width option.
Reviewed by: bcr
Approved by: doc (bcr)
Differential Revision: https://reviews.freebsd.org/D21173
- Use keyed-md5 and keyed_sha1 instead of md5 and sha1 to match
the names accepted by setkey and to also avoid confusion since
these are not "plain" MD5 or SHA1.
- Remove always-true #ifdef's to make the source a bit easier to
read.
- Add missing mappings for tcp-md5, camellia-cbc, and aes-gmac.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
- UMA_XDOMAIN enables an additional per-cpu bucket for freed memory that
was freed on a different domain from where it was allocated. This is
only used for UMA_ZONE_NUMA (first-touch) zones.
- UMA_FIRSTTOUCH sets the default UMA policy to be first-touch for all
zones. This tries to maintain locality for kernel memory.
Reviewed by: gallatin, alc, kib
Tested by: pho, gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20929
Rename the variable for the in6_addr from in6p to ia6 to follow the
convention generally used in FreeBSD.
No functional changes.
MFC after: 3 months
Sponsored by: Netflix
nfsstat -s prints bogus large numbers for the Server Re-Failed and Server
Faults fields. This was introduced by r328588.
Although I know nothing about libxo, these lines aren't titles and this
patch seems to fix the problem, so I am committing it for rea@ who emailed
it to me.
It also deleted the trailing ':' from the title lines, since those were not
in the pre-r328588 output.
If there is a more correct fix, someone conversant with libxo will need
to do so.
Submitted by: rea
MFC after: 2 weeks
Update login(1), its manual pages, similar utilities, and motd.5 to refer to
the new location.
Suggested by: delphij@ (re: r349256)
Reviewed by: bcr (manpages), delphij
Differential Revision: https://reviews.freebsd.org/D20721
Move the dpv related files from FreeBSD-runtime to a new package named
FreeBSD-dpv
The only consumer is bsdinstall which is already in it's own package.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20960
