Commit Graph

30 Commits

Author SHA1 Message Date
brooks
74063dd723 Make faith loadable, unloadable, and clonable. 2001-09-25 18:40:52 +00:00
julian
5596676e6c KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
brooks
e7b9bc714f gif(4) and stf(4) modernization:
- Remove gif dependencies from stf.
 - Make gif and stf into modules
 - Make gif cloneable.

PR:		kern/27983
Reviewed by:	ru, ume
Obtained from:	NetBSD
MFC after:	1 week
2001-07-02 21:02:09 +00:00
ume
832f8d2249 Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
  - The definitions of SADB_* in sys/net/pfkeyv2.h are still different
    from RFC2407/IANA assignment because of binary compatibility
    issue.  It should be fixed under 5-CURRENT.
  - ip6po_m member of struct ip6_pktopts is no longer used.  But, it
    is still there because of binary compatibility issue.  It should
    be removed under 5-CURRENT.

Reviewed by:	itojun
Obtained from:	KAME
MFC after:	3 weeks
2001-06-11 12:39:29 +00:00
ume
24ad56d2ed M_COPY_PKTHDR has to be done before MCLGET.
Obtained from:	KAME
2001-05-22 17:32:02 +00:00
ume
606407fff3 Fix typo in previous commit.
Submitted by:	JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
2001-04-20 08:43:20 +00:00
ume
e4b5c81fc6 - Fix to receive icmp6 echo reply within the host itself to ff02::1.
- Fix to receive icmp6 echo reply to link-local of itself.

Reported by:	Eriya Akasaka <eakasaka@rodfbs.org>
Submitted by:	JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
2001-04-19 23:51:20 +00:00
ume
0a208899c9 - correct logic of per-address input packet counts for lo0
- reject packets to fe80::xxxx%lo0 (xxxx != 1)

Submitted by:	JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
2001-04-05 19:45:02 +00:00
ume
83ec646330 Make per-address input packet counts for lo0 work.
Reported by:	bmah
Submitted by:	Noriyasu KATO <noriyasu.kato@toshiba.co.jp> (via itojun)
2001-03-28 19:47:52 +00:00
kuriyama
560883e2d1 Merge from kame (1.175 -> 1.176):
cope with freebsd4 bridge code.
2001-03-16 10:58:16 +00:00
peter
21b418d3ba Yikes, these files bogusly #include "loop.h" but didn't use the value.
My searching for NLOOP missed them. :-(
2001-01-29 11:28:20 +00:00
jlemon
954e1d2ccd Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
phk
ff5cdfae2d Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
joe
c6d8349444 Augment the 'ifaddr' structure with a 'struct if_data' to keep
statistics on a per network address basis.

Teach the IPv4 and IPv6 input/output routines to log packets/bytes
against the network address connected to the flow.

Teach netstat to display the per-address stats for IP protocols
when 'netstat -i' is evoked, instead of displaying the per-interface
stats.
2000-10-19 23:15:54 +00:00
ume
ee306bc4d0 Make ip6fw as loadable module. 2000-09-23 18:50:59 +00:00
ume
200a52ad93 Make compilable with -DIPFILTER.
Because I don't use ipfilter at all, this is not tested.
I don't know if ipfilter is work for IPv6.

Submitted by:	yoshiaki@kt.rim.or.jp
2000-08-12 18:14:13 +00:00
darrenr
d18ce92d58 activate pfil_hooks and covert ipfilter to use it 2000-07-31 13:11:42 +00:00
itojun
5f4e854de1 sync with kame tree as of july00. tons of bug fixes/improvements.
API changes:
- additional IPv6 ioctls
- IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8).
  (also syntax change)
2000-07-04 16:35:15 +00:00
phk
6be1308ad1 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
peter
a5441090de Clean up some loose ends in the network code, including the X.25 and ISO
#ifdefs.  Clean out unused netisr's and leftover netisr linker set gunk.
Tested on x86 and alpha, including world.

Approved by:	jkh
2000-02-13 03:32:07 +00:00
shin
5a973d3065 Add ip6fw.
Yes it is almost code freeze, but as the result of many thought, now I
think this should be added before 4.0...

make world check, kernel build check is done.

Reviewed by: green
Obtained from: KAME project
2000-01-29 13:54:44 +00:00
shin
7fd8aeb670 Backout diffs which should not be included. 2000-01-28 13:16:34 +00:00
shin
9b27aa3fec #This is a null commit to give correct description for the previous change.
#Please forget the strange log message of the previous commit .

IPv6 multicast routing.
  kernel IPv6 multicast routing support.
  pim6 dense mode daemon
  pim6 sparse mode daemon
  netstat support of IPv6 multicast routing statistics

  Merging to the current and testing with other existing multicast routers
  is done by Tatsuya Jinmei <jinmei@kame.net>, who writes and maintainances
  the base code in KAME distribution.

  Make world check and kernel build check was also successful.

Obtained from: KAME project
2000-01-28 12:17:49 +00:00
shin
f8e48f511e Sorry I didn't commit these files at the commit just a few minutes before.
(IPv6 multicast routing)
I think I mistakenly touched TAB and the last arg sys/netinet6 to
the cvs commit changed to sys/netinet6/in6_proto.c.
2000-01-28 05:27:14 +00:00
brian
26fcba4c5a Move the *intrq variables into net/intrq.c and unconditionally
include this in all kernels.  Declare some const *intrq_present
variables that can be checked by a module prior to using *intrq
to queue data.

Make the if_tun module capable of processing atm, ip, ip6, ipx,
natm and netatalk packets when TUNSIFHEAD is ioctl()d on.

Review not required by: freebsd-hackers
2000-01-24 20:39:02 +00:00
shin
5af875fc35 removed an ours case which think a packet destined to loopback interface
with IPv6 loopback addr for its dest or src addr as ours.
2000-01-13 05:12:48 +00:00
shin
50ba589c66 IPSEC support in the kernel.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-22 19:13:38 +00:00
shin
70f0bdf681 udp IPv6 support, IPv6/IPv4 tunneling support in kernel,
packet divert at kernel for IPv6/IPv4 translater daemon

This includes queue related patch submitted by jburkhol@home.com.

Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-07 17:39:16 +00:00
shin
8a8ecd0abc Removed IPSEC and IPV6FIREWALL because they are not ready yet. 1999-11-23 05:42:36 +00:00
shin
cad2014b27 KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP
for IPv6 yet)

With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-11-22 02:45:11 +00:00