Since r233109, kldload has the -n option, which silently ignores options
that are already loaded.
https://lists.freebsd.org/pipermail/freebsd-rc/2018-December/003899.html
Note that this script no longer reports if the module is already loaded,
but it could be argued this wasn't particularly useful information.
PR: docs/234248
Reviewed by: bcr (docs), kib, rgrimes (visual)
Approved by: jilles
Differential Revision: https://reviews.freebsd.org/D18670
ifconfig(8) syntax allows to specify only single address_family,
so we need additional invocation of ifconfig to support configuration
of cloned gif interface that may use different address families
for its internal and external addresses.
Also, ifconfig(8) does not allow to omit "inet6" keyword for address family
specifying IPv6 addresses as outer addresses of the interface.
Also, address_family is not "parameter" and it has to go before parameters
including "tunnel" keyword, so "ifconfig gif0 tunnel inet6 $oip1 $oip2" would be
wrong syntax and only "ifconfig gif0 inet6 tunnel $oip1 $oip2" is right.
With this change, the following works:
gifconfig_gif0="inet6 2a00::1 2a01::1"
ifconfig_gif0="inet 10.0.0.1 10.0.0.2 netmask 255.255.255.252"
MFC after: 2 weeks
The goal of saving entropy in Fortuna is two-fold: (1) to provide early
availability of the random device (unblocking) on next boot; and (2), to
have known, high-quality entropy available for that initial seed. We know
it is high quality because it's output taken from Fortuna.
The FS&K paper makes it clear that Fortuna unblocks when enough bits have
been input that the output //may// be safely seeded. But they emphasize
that the quality of various entropy sources is unknown, and a saved entropy
file is essential for both availability and ensuring initial
unpredictability.
In FreeBSD we persist entropy using two mechanisms:
1. The /etc/rc.d/random shutdown() function, which is used for ordinary
shutdowns and reboots; and,
2. A cron job that runs every dozen minutes or so to persist new entropy, in
case the system suffers from power loss or a crash (bypassing the
ordinary shutdown path).
Filesystems are free to cache dirty data indefinitely, with arbitrary flush
policy. Fsync must be used to ensure the data is persisted, especially for
the cron job save-entropy, whose entire goal is power loss and crash safe
entropy persistence.
Ordinary shutdown may not need the fsync because unmount should flush out
the dirty entropy file shortly afterwards. But it is always possible power
loss or crash occurs during the short window after rc.d/random shutdown runs
and before the filesystem is unmounted, so the additional fsync there seems
harmless.
PR: 230876
Reviewed by: delphij, markj, markm
Approved by: secteam (delphij)
Differential Revision: https://reviews.freebsd.org/D19742
modules by declaring corresponding variables in rc.conf. Also document
them in rc.conf(5).
Submitted by: Dries Michiels
Differential Revision: https://reviews.freebsd.org/D19673
It seems my subconcious plan in r345088 to not only prefer IPv6 autoconf
but to also slowly deteriorate legacy IP auto-configuration was uncovered
way too early.
In case IPv6 is a thing yet ipv6_autoconfif was not true, we would not
bring up the interface yet tell the follow-up DHCPv4 configuration in
ifconfig_up() that we did. So unless you were doing SYNCDHCP or IPv6
you would not get legacy-IP DHCPv4 configuration.
I see multiple problems here: (a) people not yet using IPv6 (obviously a
problem), and (b) the dhclient startup script not running dhclient in
that case despite configured to do so (needs to be investigated seperately).
Reported by: Pawel Biernacki (pawel.biernacki gmail.com)
Tested by: Pawel Biernacki
Differential Revision: https://reviews.freebsd.org/D19488
Pointyhat to: bz (not sure if it is for breaking or
for letting them notice it so easily)
Before this change we would only run rtsol on an interface which was
set to accept_rtadv and did not have rtsold enabled. This change
removes the latter condition and always runs rtsol (rather than the
deferred rtsold) to reduce the delay until we send the first RS.
This change will also handle the accept_rtadv before dhcp hence
starting IPv6 auto-configuration before IPV4 DHCP.
This change is intended for FreeBSD 13 and later only and will not be MFCed.
Reviewed by: hrs
Differential Revision: https://reviews.freebsd.org/D19488
FreeBSD removed the default /etc/pf.conf file in previous releases, but
the documentation kept mentioning it like any other file present in the
system. Change pf.conf(5) to mention in the description of the default
ruleset location that this file needs to be created manually. Also, the
default rc.conf file had it's comment extended a bit to let people know
that this file does not exist by default.
PR: 231977
Submitted by: koobs@
Reviewed by: kp@, 0mp@
Approved by: kp@
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D19530
is specified.
When WITHOUT_IPFILTER is specified, delete-old-files fails to delete
the optional rc.d files from above. Fix this.
WITHOUT_IPFILTER fails to delete the ipfilter.5 optional file during
delete-old-files. Fix this.
Reported by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after: 1 week
When piping to awk, it's almost always an anti-pattern to use 'grep'
first.
When not in a pipeline, sometimes it is faster to use tail, as awk
must process all the lines in the input stream, and won't 'seek'.
In a pipeline, both grep and awk must process all lines, so we might
as well skip the extra process creation for tail and just use awk
for all the processing.
Reviewed by: jilles
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19441
Specifically, this allows (via "-V vhostname") telling nfsd what principal
to use, instead of the hostname. This is used at iXsystems for fail-over in
HA systems.
Reviewed by: macklem
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D19191
There are many cases which this code does not handle (e.g. ZFS mirrors)
but the code can handle the single-disk case -- so it's enough to take
care of the "disk image which gets booted into a VM with a larger than
expected disk" case for which this firstboot script was created.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19095
They will stop it automatically ('Interface wlan0 is down,
dhclient exiting'); use /etc/rc.d/dhclient stop command only when
none of them is used.
MFC after: 5 days
Originally intended as 'in case in needs to be re-invoked', but it was later
decided (by myself) that 're-invoke itself' makes it more clear that the
script is expected to use this in a way.
Reported by: Jose Luis Duran (jlduran @ github)
X-MFC-With: r342792
Some rc scripts in ports (e.g. uwsgi, apache, openvpn) allow for
'application profiles' that usually require the rc script to be invoked
again for each active profile. Because there's no consistent way to
determine the path because it differs between manual/service(8) invocations
and /etc/rc invocations, this leads to patterns like these:
- www/uwsgi hardcodes the script path
- security/openvpn guesses either $_file or $0 based on $0 = /etc/rc
Instead of forcing rc scripts to guess, provide an rc_service variable to
the scripts that gets set appropriately both for direct execution or when a
script is being executed via run_rc_script (e.g. /etc/rc).
This is our analog of an OpenRC variable with the same name, different case
(RC_SERVICE).
PR: 234614
Reported by: koobs
Reviewed by: dteske, jilles
MFC after: 3 days
iBCS2 was disconnected from the build in 2015 (see r291419)
bsdconfig parts submitted by dteske.
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
/usr/sbin/audit(dist)?d are only installed if ${MK_AUDIT} == yes. Their
supporting scripts should only be installed in those instances as well.
Submitted by: ngie
Reviewed by: emaste
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd/pull/242
'read' pessimistically read(2)s one byte at a time, which can be quite
silly for large environments in slow emulators.
In my boring user environment, truss shows that the number of read()
syscalls to source rc.subr and invoke list_vars is reduced by something like
3400 to 60. ministat(1) shows a significant time difference of about -71%
for my environment.
Suggested by: jilles
Discussed with: dteske, jhb, jilles
Differential Revision: https://reviews.freebsd.org/D18481
This adds new keywords to rc/service to enable/disable a service's
rc.conf(5) variable and "delete" to remove the variable.
When the "service_delete_empty" variable in rc.conf(5) is set to "YES"
(default is "NO") an rc.conf.d file (in /etc/ or /usr/local/etc) is
deleted if empty after modification using "service $foo delete".
Submitted by: lme (modified)
Reviewed by: 0mp (previous version), lme, bcr
Relnotes: yes
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D17113
and runs scripts containing "KEYWORD: resume" with single "resume" argument.
Working example is the port sysutils/cpupdate that defines
extra_commands="resume" to reload CPU microcode cleared
by suspend/resume sequence.
This change does nothing for a system having no scripts with KEYWORD: resume.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15247
Currently, rc.inidiskless assumes that local system configuration
changes are kept in some mountable file system. For example,
nanobsd uses dedicated partition mounted as /cfg for this.
However, small embedded devices like MIPS routers may have no enough flash
space to keep full-blown file system but have only one or couple
small flash blocks to keep persistent local configuration overrides.
This change extends rc.initdiskless and introduces ability to run auxiliary
command /conf/T/M/extract that is supposed to extract configuration overrides
from such local storage.
For example, the command /conf/default/etc/extract may contain something like:
cd "$1" && bsdcpio --quiet -idu < /dev/map/cfg
bsdcpio command extracts compressed archive from the storage to /etc
assuming the storage is exposed by the kernel as /dev/map/cfg to userland.
PR: 204215
MFC after: 1 month
and make previously working configuration like this work again:
gif_interfaces="gif0"
gifconfig_gif0="1.1.1.1 2.2.2.2"
ifconfig_gif0="inet 192.168.1.1 192.168.1.2 netmask 255.255.255.252"
PR: 204700
MFC after: 1 month
if a network connection is available. This is not an issue when running
'service local_unbound setup' interactively, but can be on a diskless
system where local_unbound self-configures on every boot. To address
this, add explicit dependencies on netwait and defaultroute.
Submitted by: eugen
Approved by: re (gjb)
in r339413, a current pkgbase update problem came up. For users
testing pkgbase at the moment there is no (automatic) way to pick
up new base packages (yet).
As a result rather than also moving init(8) to its own package,
back out the part of the change in r339413 that moved rc* to its
own package and defer creating new packages until the
infrastructure is in place to handle these cases.
Both init and rc* are considered too problematic to be lost by
early adaptors at this stage.
Discussed with: brd
Reviewed by: brd
Approved by: re (gjb)
The reasons for this are forward looking to pkgbase:
* /sbin/init is a special binary; try not to replace it with
every package update because an rc script was touched.
(a follow-up commit will make init its own package)
* having rc in its own place will allow more easy replacement
of the rc framework with alternatives, such as openrc.
Discussed with: brd (during BSDCam), kmoore
Requested by: cem, bz
PR: 231522
Approved by: re (gjb)
