Avoid unnecessary message type setting and centralize the send context
to transaction id cast.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7500
7085 add support for "if" and "else" statements in dtrace
illumos/illumos-gate@c3bd3abd88
Add syntactic sugar to dtrace: "if" and "else" statements. The sugar is
baked down to standard dtrace features by adding additional clauses with
the appropriate predicates.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
Relnotes: yes
7033 ustack helper should fault on bad return values
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Alex Wilson <alex.wilson@joyent.com>
illumos/illumos-gate@a2f72b65eb
MFC after: 2 weeks
7034 negative record sizes should be rejected
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Alex Wilson <alex.wilson@joyent.com>
illumos/illumos-gate@0b8049bfb0
MFC after: 2 weeks
This is a driver for a pre-ATAPI ISA CD-ROM adapter. As noted in
the manpage, this driver is only useful as a backend to cdcontrol to
play audio CDs since it doesn't use DMA, so its data performance is
"abysmal" (and that was true in the mid 90's).
Make the kern_fsync() function public, so that it can be used by other
parts of the kernel. Fix up existing consumers to make use of it.
Requested by: kib
If the caller of sem_post() wakes up a thread sleeping via sem_wait()
before it clears the has_waiters flag, the caller of sem_wait() has no way of
knowing when it is safe to destroy the semaphore and reuse the memory. This is
because the caller of sem_post() may be interrupted between the wake step and
the clearing of has_waiters. It will then write into the has_waiters flag in
userspace after being preempted for some unknown amount of time.
Reviewed by: jhb, kib, vangyzen
Approved by: kib (mentor), vangyzen (mentor)
MFC after: 2 weeks
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D7505
close functions. Scattered calls to sc_cnputc() and sc_cngetc() were
broken by turning the semi-reentrant inline context-switching code in
these functions into the grabbing functions. cncheckc() calls for
panic dumps are the main broken case. The grabbing functions have
special behaviour (mainly screen switching in sc_cngrab()) which makes
them unsuitable as replacements for the inline code.
Standard VOP_FSYNC() implementation just syncs data buffers, and due
to this, is the correct and efficient implementation for msdosfs or
any other filesystem which uses bufer cache trivially. Provide
globally visible wrapper vop_stdfdatasync_buf() for future consumption
by other filesystems.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7471
The syscall is a trivial wrapper around new VOP_FDATASYNC(), sharing
code with fsync(2). For all filesystems, this commit provides the
implementation which delegates the work of VOP_FDATASYNC() to
VOP_FSYNC(). This is functionally correct but not efficient.
This is not yet POSIX-compliant implementation, because it does not
ensure that queued AIO requests are completed before returning.
Reviewed by: mckusick
Discussed with: avg (ZFS), jhb (AIO part)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7471
The NetBSD ATF tests explicitly check that these functions do not modify
their input. These tests are NetBSD-specific. They test for something
that is not part of POSIX.
PR: 211873
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D7506
Simply change the mode to K_XLATE using a local variable and use the
grab level as a flag to tell screen switches not to change it again,
so that we don't need to switch scp->kbd_mode. We did the latter,
but didn't have the complications to update the keyboard mode switch
for every screen switch. sc->kbd_mode remains at its user setting
for all scp's and ungrabbing restores to it.
- Add handling of VF register sets to t4_get_regs_len() and t4_get_regs().
- While here, use t4_get_regs_len() in the ioctl handler for regdump
instead of inlining it.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7484
- Use alternate register locations for the data and control registers for
VFs.
- Do a dummy read to force the writes to the mailbox data registers to
post before the write to the control register on VFs.
- Do not check the PCI-e firmware register for errors on VFs.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7483
Add fields to hold the SGE control register and free list buffer sizes to
the sge_params structure. Populate these new fields in
t4_init_sge_params() for PF devices and change t4_read_chip_settings() to
pull these values out of the params structure instead of reading
registers directly. This will permit t4_read_chip_settings() to be reused
for VF devices which cannot read SGE registers directly.
While here, move the call to t4_init_sge_params() to
get_params__post_init(). The VF driver will populate the SGE parameters
structure via a different method before calling t4_read_chip_settings().
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7476
Like scr_lock, the grab count needs to be per-physical-device to work.
This bug corrupted the grab count on both vtys if the ungrabbed vty is
different from the console, and failed to restore the keyboard state
on the ungrabbed vty, but not restoring it usually left the keyboard
mode part of the keyboard state uncorrupted at 1 (K_XLATE), while
after this fix the keyboard mode part is usually corrupted to 0 (K_RAW).
While here, rename the grab count from grabbed to grab_level.
This bug corrupted the grab count on both vtys if the ungrabbed vty is
different from the console, and failed to restore the keyboard state
on the ungrabbed vty, but not restoring the latter usually left the
keyboard mode part of it uncorrupted at 1 (K_XLATE), while after this
fix the keyboard mode part is usually corrupted to 0 (K_RAW).
While here, rename the grab count from 'grabbed' to grab_level.
- never call up to the tty layer to restart output for keyboard input in
console mode. This was already disallowed in kdb mode. Other cases
are rarely reached.
- disable the reboot, halt and powerdown keys in console mode. The suspend,
standby and panic keys are still allowed, and aren't even conditonal
on excessive configuration options. Some of these actions are still
available in ddb mode as ddb commands which are equally unsafe. Some
are useful at input prompts and should be restored when the locking is
fixed.
- disallow bells in kdb mode (should be in console mode, but the flag for
that is not available). Visual bell gives very alarming behaviour by
trying to use callouts which don't work in kdb mode. Audio bell uses
timeouts and hardware resources with mutexes that can deadlock in
reasonable use of ddb.
Screen switches in kdb mode are not very safe, but they are important
functionality and there is a lot of code to make them sort of work.
24 hours is too long. Periodic scripts are executed serially, so when
combined with the sleep in 410.pkg-audit periodic could actually take more
than 24 hours and block the next invocation.
Reviewed by: cy
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D7481
restores avoidance of doing dangerous things like calling wakeup() and
callouts while in ddb.
Initialization of 'debugger' was broken by removing the cndbctl() console
method that was used mainly in this driver to initialize 'debugger' and
switch to the console screen on entry to ddb. The screen switch was
restored using the cngrab() method, but cngrab() is more general so it
should not initialize 'debugger' and never did. 'debugger' was just
an over-engineered alias for kdb_active anyway. It existed because
kdb_active (when it was named ddb_active) was considered as a private
kdb variable, and there are ordering problems initializing the variables
atomically with the state that they represent, but an extra variable and
method to set it increased these problems.
The bug caused LORs, but WITNESS is normally misconfigured with
WITNESS_SKIPSIN so it doesn't check the spinlocks used by wakeup() and
callouts.
virtual-device, but needs to be per-physical-device so that it protects
shared data. Usually, scp->sc->write_in_progress got corrupted first
and further corruption was limited when this variable was left at nonzero
with no write in progress.
Attempt to fix missing lock destruction in r162285. Put it with the
lock destruction for r172250 after moving the latter. Both might be
unreachable.
To demonstrate the bug, find a buggy syscall or sysctl that calls
printf(9) and run this often. Run hd /dev/zero >/dev/ttyvN for any
N != 0. The console spam goes to ttyv0 and the non-console spam goes
to ttyvN, so the lock provided no protection (but it helped for
N == 0).
Without this, rules using address ranges (e.g. "10.1.1.1 - 10.1.1.5") did not
match addresses correctly on little-endian systems.
PR: 211796
Obtained from: OpenBSD (sthen)
MFC after: 3 days
