FreeBSD does not set the pid field in the pfloghdr struct. This field is
populated on other platforms, document this to save people from trying
to use this field.
Event: Aberdeen hackathon 2019
Reviewed by: kp, bcr, bz
Approved by: bz (mentor)
Differential Revision: https://reviews.freebsd.org/D19952
FDT_DTS_FILE was built separately with a rule in sys/conf/files and
recreated the rules we used in dtb.mk. Now that we have other infrastructure
to build a DTB along with the kernel, fold FDT_DTS_FILE into that since it
doesn't have any special requirements.
fdt(4) never got revised to mention the DTS/DTSO make options, so do that
now.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19736
isc_rxd_refill, isc_rxd_flush return nothing, not void *.
isc_txd_credits_update, isc_rxd_available return int, not int *.
isc_txd_credits_update has a bool as final argument, not a uint32_t.
Prior to r315217 it took four arguments; the final two were
uint32_t, bool.
Reported by: Gerald Aryeetey <aryeeteygerald_rogers.com>
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The imagined use is for early boot consumers of random to be able to make
decisions based on whether random is available yet or not. One such
consumer seems to be __stack_chk_init(), which runs immediately after random
is initialized. A follow-up patch will attempt to address that.
Reported by: many
Reviewed by: delphij (except man page)
Approved by: secteam(delphij)
Differential Revision: https://reviews.freebsd.org/D19926
The pflog0 interface is created when the module is loaded, this can
be triggered by pf and pflogd being enabled or by kldloading the module.
By default the interface would be pflog0, add the ifconfig stage of the
example to make this example clearer.
Reviewed by: kp, bz, bcr, jtl, 0mp
Approved by: jtl (mentor), bz (mentor)
Differential Revision: https://reviews.freebsd.org/D19861
read_random() is/was used, mostly without error checking, in a lot of
very sensitive places in the kernel -- including seeding the widely used
arc4random(9).
Most uses, especially arc4random(9), should block until the device is seeded
rather than proceeding with a bogus or empty seed. I did not spy any
obvious kernel consumers where blocking would be inappropriate (in the
sense that lack of entropy would be ok -- I did not investigate locking
angle thoroughly). In many instances, arc4random_buf(9) or that family
of APIs would be more appropriate anyway; that work was done in r345865.
A minor cleanup was made to the implementation of the READ_RANDOM function:
instead of using a variable-length array on the stack to temporarily store
all full random blocks sufficient to satisfy the requested 'len', only store
a single block on the stack. This has some benefit in terms of reducing
stack usage, reducing memcpy overhead and reducing devrandom output leakage
via the stack. Additionally, the stack block is now safely zeroed if it was
used.
One caveat of this change is that the kern.arandom sysctl no longer returns
zero bytes immediately if the random device is not seeded. This means that
FreeBSD-specific userspace applications which attempted to handle an
unseeded random device may be broken by this change. If such behavior is
needed, it can be replaced by the more portable getrandom(2) GRND_NONBLOCK
option.
On any typical FreeBSD system, entropy is persisted on read/write media and
used to seed the random device very early in boot, and blocking is never a
problem.
This change primarily impacts the behavior of /dev/random on embedded
systems with read-only media that do not configure "nodevice random". We
toggle the default from 'charge on blindly with no entropy' to 'block
indefinitely.' This default is safer, but may cause frustration. Embedded
system designers using FreeBSD have several options. The most obvious is to
plan to have a small writable NVRAM or NAND to persist entropy, like larger
systems. Early entropy can be fed from any loader, or by writing directly
to /dev/random during boot. Some embedded SoCs now provide a fast hardware
entropy source; this would also work for quickly seeding Fortuna. A 3rd
option would be creating an embedded-specific, more simplistic random
module, like that designed by DJB in [1] (this design still requires a small
rewritable media for forward secrecy). Finally, the least preferred option
might be "nodevice random", although I plan to remove this in a subsequent
revision.
To help developers emulate the behavior of these embedded systems on
ordinary workstations, the tunable kern.random.block_seeded_status was
added. When set to 1, it blocks the random device.
I attempted to document this change in random.4 and random.9 and ran into a
bunch of out-of-date or irrelevant or inaccurate content and ended up
rototilling those documents more than I intended to. Sorry. I think
they're in a better state now.
PR: 230875
Reviewed by: delphij, markm (earlier version)
Approved by: secteam(delphij), devrandom(markm)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19744
Since r233109, kldload has the -n option, which silently ignores options
that are already loaded.
https://lists.freebsd.org/pipermail/freebsd-rc/2018-December/003899.html
Note that this script no longer reports if the module is already loaded,
but it could be argued this wasn't particularly useful information.
PR: docs/234248
Reviewed by: bcr (docs), kib, rgrimes (visual)
Approved by: jilles
Differential Revision: https://reviews.freebsd.org/D18670
- Remove issues that no longer apply thanks to devfs
- Add language pointing out devfs's role and referencing its config
- Add a "historical notes" section and move discussion of block vs character devs to it, including pointing out the removal of block devs
- Modernize some examples
MFC after: 1 week
PR: 236970
Submitted by: andrew@tao173.riddles.org.uk
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D19799
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
This is particularly useful when installing programs for tests that need to be
linked statically, e.g., mini-me from capsicum-test, which is linked statically
to avoid the dynamic library lookup in the upstream project.
Reviewed by: emaste
Approved by: emaste (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19756
The behavior prior to this change would not override default values if set in
`bsd.own.mk`, or (in the more general case) globally before `bsd.progs.mk` was
included. This affected `bsd.test.mk` as well, since it consumes
`bsd.progs.mk`.
Some examples of this failing behavior are as follows:
* `BINMODE` defaults to 0555 per `bsd.own.mk`. If someone wanted to set the
`BINMODE` to `NOBINMODE` (0444) for `prog`, for example, like
`BINMODE.prog= ${NOBINMODE}`, `bsd.progs.mk` would not honor the per-PROG
setting.
* An application, `prog`, does not build at `WARNS?= 6`. Before this change,
setting to a lower `WARNS` value, e.g., `WARNS.prog= 3`, would have been
impossible, requiring that `prog` be built from another directory,
the global `WARNS` be lowered, or a per-PROG value needing to be set
across the board. None of the above workarounds is desirable.
This change unbreaks variables defined in `PROG_OVERRIDE_VARS` which have
defaults set before `bsd.progs.mk` is included, by setting them to their
defined values if set on a per-PROG basis.
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19755
The current logic for CSTD/CXXSTD requires homogenity as far as the
supported C/C++ standards, which is a sensible default. However, when
dealing with differing versions of C++, some code may compile with C++11, but
not C++17 (for instance). So in order to avoid having people convert over their
code to the new standard, give the users the ability to specify the standard on
a per-program basis.
This will allow a user to override the supporting standard for a set of
programs, mixing C++11 with C++14 (for instance).
Reviewed by: asomers
Apprved by: emaste (mentor)
MFC after: 1 month
MFC with: r345708
Differential Revision: https://reviews.freebsd.org/D19738
CXXSTD was added as the C++ analogue to CSTD.
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
MFC with: r345203, r345704, r345705
Relnotes: yes
Tested with: make tinderbox
Differential Revision: https://reviews.freebsd.org/D19732
When a review is closed via Phabricator it updates the patch attached to the
review. I downloaded the raw patch from Phabricator, applied it, and repeated
my mistake from r345704 by accident mixing content from D19732 and D19738.
For my own personal sanity, I will try not to mix reviews like this in the
future.
MFC after: 1 month
MFC with: r345706
Approved by: emaste (mentor, implicit)
CXXSTD was added as the C++ analogue to CSTD.
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
MFC with: r345203, r345704, r345705
Relnotes: yes
Tested with: make tinderbox
Differential Revision: https://reviews.freebsd.org/D19732
I accidentally committed code from two reviews. I will reintroduce the code to
bsd.progs.mk as part of a separate commit from r345704.
Approved by: emaste (mentor, implicit)
MFC after: 2 months
MFC with: r345704
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19732
This makes it easier for googletest users to leverage googletest, instead of
forcing them to plug GTEST_CXXFLAGS into CXXFLAGS manually (resulting in
unnecessary duplication).
I will be following this up with a more proper fix in src.libnames.mk, as
src.libnames.mk should be automatically adding this directory to
CFLAGS/CXXFLAGS when private libraries are referenced. Not doing so can result
in mismatches between base-provided private library's and ports-provided
library's headers.
While here, tweak the comment to clarify what the intent is behind spamming
CXXFLAGS.
MFC after: 5 weeks
MFC with: r345203
Reported by: asomers
Reviewed by: asomers
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D19731
This was missed in r342139 when timed(8) was removed and fixes a
warning when running makeman to regenerate src.conf.5.
Differential Revision: https://reviews.freebsd.org/D19486
modules by declaring corresponding variables in rc.conf. Also document
them in rc.conf(5).
Submitted by: Dries Michiels
Differential Revision: https://reviews.freebsd.org/D19673
From Jake:
The iflib core never modifies the isc_driver_version string. Allow
drivers to safely assign pointers to constant buffers by marking this
parameter const.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, gallatin@, jhb@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19577
* Set MK_OPENMP to yes by default only on amd64, for now.
* Bump __FreeBSD_version to signal this addition.
* Ensure gcc's conflicting omp.h is not installed if MK_OPENMP is yes.
* Update OptionalObsoleteFiles.inc to cope with the conflicting omp.h.
* Regenerate src.conf(5) with new WITH/WITHOUT fragments.
Relnotes: yes
PR: 236062
MFC after: 1 month
X-MFC-With: r344779
Looks like the example was broken by change of SYSCTL_STATIC_CHILDREN
definition in r267992. Fix build by switching to using SYSCTL_ADD_ROOT_NODE
PR: 236139
Submitted by: Andrew Reiter <arr@watson.org>
MFC after: 1 week
This initial integration takes googlemock/googletest release 1.8.1, integrates
the library, tests, and sample unit tests into the build.
googlemock/googletest's inclusion is optionally available via `MK_GOOGLETEST`.
`MK_GOOGLETEST` is dependent on `MK_TESTS` and is enabled by default when
built with a C++11 capable toolchain.
Google tests can be specified via the `GTESTS` variable, which, in comparison
with the other test drivers, is more simplified/streamlined, as Googletest only
supports C++ tests; not raw C or shell tests (C tests can be written in C++
using the standard embedding methods).
No dependent libraries are assumed for the tests. One must specify `gmock`,
`gmock_main`, `gtest`, or `gtest_main`, via `LIBADD` for the program.
More information about googlemock and googletest can be found on the
Googletest [project page](https://github.com/google/googletest), and the
[GoogleMock](https://github.com/google/googletest/blob/v1.8.x/googlemock/docs/Documentation.md)
and
[GoogleTest](https://github.com/google/googletest/tree/v1.8.x/googletest/docs)
docs.
These tests are originally integrated into the build as plain driver tests, but
will be natively integrated into Kyua in a later version.
Known issues/Errata:
* [WhenDynamicCastToTest.AmbiguousCast fails on FreeBSD](https://github.com/google/googletest/issues/2172)
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D19551
while using LSI RAID adapters as it was completely obscure before:
mfi has no TRIM support at all and mrsas provides TRIM
if underlying adapter does it (for Non-RAID drives generally).
FreeBSD removed the default /etc/pf.conf file in previous releases, but
the documentation kept mentioning it like any other file present in the
system. Change pf.conf(5) to mention in the description of the default
ruleset location that this file needs to be created manually. Also, the
default rc.conf file had it's comment extended a bit to let people know
that this file does not exist by default.
PR: 231977
Submitted by: koobs@
Reviewed by: kp@, 0mp@
Approved by: kp@
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D19530
