Different compilation units may otherwise get a different view of the
layout of struct tty depending on whether they include opt_printf.h.
This caused a blowup in the number of types defined in the kernel's
CTF file after r339468; thanks to dim@ for bisecting down to that
revision.
PR: 232675
Reported by: dim
Reviewed by: cem (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17877
At the moment, hintmode and envmode are used to indicate whether static
hints or static env have been provided in the kernel config(5) and the
static versions are mutually exclusive with loader(8)-provided environment.
hintmode *can* be reconfigured later to pull from the dynamic environment,
thus taking advantage of the loader(8) or post-kmem environment setting.
This changeset fixes both problems at once to move us from a semi-confusing
state to a consistent state: if an environment file, hints file, or
loader(8) environment are provided, we use them in a well-known order of
precedence:
- loader(8) environment
- static environment
- static hints file
Once the dynamic environment is setup this becomes a moot point. The
loader(8) and static environments are merged (respecting the above order of
precedence), and the static hints are merged in on an as-needed basis after
the dynamic environment has been setup.
Hints lookup are changed to respect all of the above. Before the dynamic
environment is setup, lookups use the above-mentioned order and fallback to
the next environment if a matching hint is not found. Once the dynamic
environment is setup, that is used on its own since it captures all of the
above information plus any dynamic kenv settings that came up later in boot.
The following tangentially related changes were made to res_find:
- A hintp cookie is now passed in so that related searches continue using
the chain of environments (or dynamic environment) without relying on
global state
- All three environments will be searched if they actually have valid hints
to use, rather than just choosing the first environment that actually had
a hint and rolling with that only
The hintmode sysctl has been ripped out. static_{env,hints}.disabled are
still honored and will disable their respective environments from being used
for hint lookups and from being merged into the dynamic environment, as
expected.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15953
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
dropped then reacquired due to using M_WAITOK, which opens a window in
which the tty device can disappear. Check for this and return ENXIO
back up the call chain so that callers can cope.
This closes a race where TF_GONE would get set while buffers were being
allocated as part of ttydev_open(), causing a subsequent call to
ttydevsw_modem() later in ttydev_open() to assert.
Reported by: pho
Reviewed by: kib
after tty_timedwait() returns an error only if the error is EWOULDBLOCK;
other errors cause an immediate return. This fixes the case of the tty
disappearing while in tty_drain().
Reported by: pho
drain timeout handling to historical freebsd behavior.
The primary reason for these changes is the need to have tty_drain() call
ttydevsw_busy() at some reasonable sub-second rate, to poll hardware that
doesn't signal an interrupt when the transmit shift register becomes empty
(which includes virtually all USB serial hardware). Such hardware hangs
in a ttyout wait, because it never gets an opportunity to trigger a wakeup
from the sleep in tty_drain() by calling ttydisc_getc() again, after
handing the last of the buffered data to the hardware.
While researching the history of changes to tty_drain() I stumbled across
some email describing the historical BSD behavior of tcdrain() and close()
on serial ports, and the ability of comcontrol(1) to control timeout
behavior. Using that and some advice from Bruce Evans as a guide, I've
put together these changes to implement the hardware polling and restore
the historical timeout behaviors...
- tty_drain() now calls ttydevsw_busy() in a loop at 10 Hz to accomodate
hardware that requires polling for busy state.
- The "new historical" behavior for draining during close(2) is retained:
the drain timeout is "1 second without making any progress". When the
1-second timeout expires, if the count of bytes remaining in the tty
layer buffer is smaller than last time, the timeout is extended for
another second. Unfortunately, the same logic cannot be extended all
the way down to the hardware, because the interface to that layer is a
simple busy/not-busy indication.
- Due to the previous point, an application that needs a guarantee that
all data has been transmitted must use TIOCDRAIN/tcdrain(3) before
calling close(2).
- The historical behavior of honoring the drainwait setting for TIOCDRAIN
(used by tcdrain(3)) is restored.
- The historical kern.drainwait sysctl to control the global default
drainwait time is restored, but is now named kern.tty_drainwait.
- The historical default drainwait timeout of 300 seconds is restored.
- Handling of TIOCGDRAINWAIT and TIOCSDRAINWAIT ioctls is restored
(this also makes the comcontrol(1) drainwait verb work again).
- Manpages are updated to document these behaviors.
Reviewed by: bde (prior version)
close or assert the bug that it is clear when leaving.
Remove an unrelated rotted comment that was attached to the buggy
clearing.
Since draining is not done in more cases, flushing is needed in more
cases, so start fixing flushing:
- do a full flush in ttydisc_close(). State what POSIX requires more
clearly. This was missing ttydevsw_pktnotify() calls to tell the
devsw layer to flush. Hardware tty drivers don't actually flush
since they don't understand this API.
- fix 2 missing wakeups in tty_flush(). Most of the wakeups here are
unnecessary for last close. But ttydisc_close() did one of the
missing ones.
This flow control bug ameliorated the design bug of requiring
potentially unbounded waits in draining. Software flow control is the
easiest way to get an unbounded wait, and a long wait is sometimes
actually useful. Users can type the xoff character on the receiver
and (if ixon is set on the sender) expect the output to be held until
the user is ready for more.
Hardware flow control can also give the unbounded wait, and this bug
didn't affect hardware flow control. Unbounded waits from hardware
flow control take a more unusual configuration. E.g., a terminal
program that controls the modem status lines, or unplugging the cable
in a configuration where this doesn't break the connection.
The design bug is still ameliorated by a newer bug in draining for
last close -- the 1 second timeout. E.g., if the user types the
xoff character and the sender reaches last close, then output is
not resumed and the wait times out after just 1 second. This is
broken, but preferable to an unbounded wait. Before this change,
the output was resumed immediately and usually completed.
Submitted by: bde
MFC after: 2 weeks
intended behaviour in its man page. Simplify tty_drain() to match.
Don't call ttydevsw methods in tty_flush() if the device is gone
since we now sometimes call it then.
The flushing was supposed to be implemented by passing the FNONBLOCK
flag to VOP_CLOSE() for revoke(). The tty driver is one of the few
that can block in close and was one of the fewer that knew about this.
This almost worked in FreeBSD-1 and similarly in Net/2. These
versions only almost worked because there was and is considerable
confusion between IO_NDELAY and FNONBLOCK (aka O_NONBLOCK). IO_NDELAY
is only valid for VOP_READ() and VOP_WRITE(). For other VOPs it has
the same value as O_SHLOCK. But since vfs_subr.c and tty.c
consistently used the wrong flag and the O_SHLOCK flag is rarely set,
this mostly worked. It also gave the feature than applications could
get the non-blocking close by abusing O_SHLOCK.
This was first broken then fixed in 1995. I changed only the tty
driver to use FNONBLOCK, as a hack to get non-blocking via the normal
flag FNONBLOCK for last closes. I didn't know about revoke()'s use
of IO_NDELAY or change it to be consistent, so revoke() was broken.
Then I changed revoke() to match.
This was next broken in 1997 then fixed in 1998. Importing Lite2 made
the flags inconsistent again by undoing the fix only in vfs_subr.c.
This was next broken in 2008 by replacing everything in tty.c and not
checking any flags in last close. Other bugs in draining limited the
resulting unbounded waits to drain in some cases.
It is now possible to fix this better using the new FREVOKE flag.
Just restore flushing for revoke() for now. Don't restore or undo any
hacks for ordinary last closes yet. But remove dead code in the
1-second relative timeout (r272789). This did extra work to extend
the buggy draining for revoke() for as long as possible. The 1-second
timeout made this not very long by usually flushing after 1 second.
Submitted by: bde
MFC after: 2 weeks
open (in disguise as the console device). The only allowed combination
was supposed to be the callin device with the console.
Fix the assertion in ttydev_close() that was meant to detect this (it
only detected all 3 devices being open). Assert this in ttydev_open()
too.
Submitted by: bde
MFC after: 2 weeks
(TF_OPENED_CONS) were broken in r188147 by adding TF_OPENED_CONS
without updating the string. It was especially confusing to display
OPENED_CONS as GONE and BYPASS as ZOMBIE. 2 flags at the end were
not updated in r188487.
Don't print an extra 0x prefix for %p in a ddb command. In the rest
of the kernel there are more than 6000 lines with %p and only about
40 with this bug.
Print a non-extra 0x prefix for %b in a ddb command. In the rest
of the kernel, there are approx. 180 lines with %b and 2/3 of them
have this bug.
Submitted by: bde
MFC after: 2 weeks
to actually wait until the TX FIFOs of UARTs have be drained before
returning. This is done by bringing the equivalent of the TS_BUSY flag
found in the previous implementation back in an ABI-preserving way.
Reported and tested by: Patrick Powell
Most likely, drivers for USB-serial-adapters likewise incorporating
TX FIFOs as well as other terminal devices that buffer output in some
form should also provide implementations of tsw_busy.
MFC after: 3 days
Tty.c was untypical in that it handled the si_drv1 issue consistently
and correctly, by always checking for si_drv1 being non-NULL and
sleeping if NULL. The removed code also illustrated unneeded
complications in drivers which are eliminated by the use of new KPI.
Reviewed by: hps, jhb
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D4746
Introduce fget_fcntl which performs appropriate checks when needed.
This removes a branch from fget_unlocked.
Introduce fget_mmap dealing with cap_rights_to_vmprot conversion.
This removes a branch from _fget.
Modify fget_unlocked to pass sequence counter to interested callers so
that they can perform their own checks and make sure the result was
otained from stable & current state.
Reviewed by: silence on -hackers
1. ERESTART is not only returned when the revoke count changed. It
is also returned when a signal is received. While a change in
the revoke count should be ignored, a signal should not.
2. Waiting until the output queue is entirely drained can cause a
hang when the underlying device is stuck or broken.
Have tty_drain() take care of this by telling it when we're leaving.
When leaving, tty_drain() will use a timed wait to address point 2
above and it will check the revoke count to handle point 1 above.
The timeout is set to 1 second, which is arbitrary and long enough
to expect a change in the output queue.
Discussed with: jilles@
Reported by: Yamagi Burmeister <lists@yamagi.org>
that the tty is dequeued from 'tty_list' only the first time.
The panic below was seen when a revoke(2) was issued on an nmdm device.
In this case there was also a thread that was blocked on a read(2) on the
device. The revoke(2) woke up the blocked thread which would typically
return an error to userspace. In this case the reader also held the last
reference on the file descriptor so fdrop() ended up calling tty_rel_free()
via ttydev_close().
tty_rel_free() then tried to dequeue 'tp' again which led to the panic.
panic: Bad link elm 0xfffff80042602400 prev->next != elm
cpuid = 1
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00f9c90460
kdb_backtrace() at kdb_backtrace+0x39/frame 0xfffffe00f9c90510
vpanic() at vpanic+0x189/frame 0xfffffe00f9c90590
panic() at panic+0x43/frame 0xfffffe00f9c905f0
tty_rel_free() at tty_rel_free+0x29b/frame 0xfffffe00f9c90640
ttydev_close() at ttydev_close+0x1f9/frame 0xfffffe00f9c90690
devfs_close() at devfs_close+0x298/frame 0xfffffe00f9c90720
VOP_CLOSE_APV() at VOP_CLOSE_APV+0x13c/frame 0xfffffe00f9c90770
vn_close() at vn_close+0x194/frame 0xfffffe00f9c90810
vn_closefile() at vn_closefile+0x48/frame 0xfffffe00f9c90890
devfs_close_f() at devfs_close_f+0x2c/frame 0xfffffe00f9c908c0
_fdrop() at _fdrop+0x29/frame 0xfffffe00f9c908e0
sys_read() at sys_read+0x63/frame 0xfffffe00f9c90980
amd64_syscall() at amd64_syscall+0x2b3/frame 0xfffffe00f9c90ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe00f9c90ab0
--- syscall (3, FreeBSD ELF64, sys_read), rip = 0x800b78d8a, rsp = 0x7fffffbfdaf8, rbp = 0x7fffffbfdb30 ---
CR: https://reviews.freebsd.org/D851
Reviewed by: glebius, ed
Reported by: Leon Dang
Sponsored by: Nahanni Systems
MFC after: 1 week
is the indication that draining got interrupted due to a revoke(2) and
that tty_drain() is to be called again for draining to complete. If the
device is flagged as gone, then waiting/draining is not possible. Only
return ERESTART when waiting is still possible.
Obtained from: Juniper Networks, Inc.
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.
MFC after: 3 weeks
to fail and return error.
- Use make_dev_p() in tty_makedevf() instead of make_dev_cred().
- Always pass MAKEDEV_CHECKNAME flag.
- Optionally pass MAKEDEV_REF flag.
- Provide macro for compatibility with old API.
This fixes races with simultaneous creation and desctruction of
ttys, and makes it possible to call tty_makedevf() from device
cloners.
A race in tty_watermarks() still exist, since the latter drops
lock for M_WAITOK allocation. This will be addressed in separate
commit.
Reviewed by: kib
Sponsored by: Nginx, Inc.
the TTY. In such a case, ttydev_close() is called multiple times and
each time, t_revokecnt is incremented and cv_broadcast() is called for
both the t_outwait and t_inwait condition variables.
Let's say revoke(2) comes in first and gets to call tty_drain() from
ttydev_leave(). Let's say that the revoke comes from init(8) as the
result of running "shutdown -r now". Since shutdown prints various
messages to the console before announing that the machine will reboot
immediately, let's also say that the output queue is not empty and
that tty_drain() has something to do. Let's assume this all happens
on a 9600 baud serial console, so it takes a time to drain.
The shutdown command will exit(2) and as such will end up closing
stdout. Let's say this close will come in second, bump t_revokecnt
and call tty_wakeup(). This has tty_wait() return prematurely and
the next thing that will happen is that the thread doing revoke(2)
will flush the TTY. Since the drain wasn't complete, the flush will
effectively drop whatever is left in t_outq.
This change takes into account that tty_drain() will return ERESTART
due to the fact that t_revokecnt was bumped and in that case simply
call tty_drain() again. The thread in question is already performing
the close so it can safely finish draining the TTY before destroying
the TTY structure.
Now all messages from shutdown will be printed on the serial console.
Obtained from: Juniper Networks, Inc.
in the future in a backward compatible (API and ABI) way.
The cap_rights_t represents capability rights. We used to use one bit to
represent one right, but we are running out of spare bits. Currently the new
structure provides place for 114 rights (so 50 more than the previous
cap_rights_t), but it is possible to grow the structure to hold at least 285
rights, although we can make it even larger if 285 rights won't be enough.
The structure definition looks like this:
struct cap_rights {
uint64_t cr_rights[CAP_RIGHTS_VERSION + 2];
};
The initial CAP_RIGHTS_VERSION is 0.
The top two bits in the first element of the cr_rights[] array contain total
number of elements in the array - 2. This means if those two bits are equal to
0, we have 2 array elements.
The top two bits in all remaining array elements should be 0.
The next five bits in all array elements contain array index. Only one bit is
used and bit position in this five-bits range defines array index. This means
there can be at most five array elements in the future.
To define new right the CAPRIGHT() macro must be used. The macro takes two
arguments - an array index and a bit to set, eg.
#define CAP_PDKILL CAPRIGHT(1, 0x0000000000000800ULL)
We still support aliases that combine few rights, but the rights have to belong
to the same array element, eg:
#define CAP_LOOKUP CAPRIGHT(0, 0x0000000000000400ULL)
#define CAP_FCHMOD CAPRIGHT(0, 0x0000000000002000ULL)
#define CAP_FCHMODAT (CAP_FCHMOD | CAP_LOOKUP)
There is new API to manage the new cap_rights_t structure:
cap_rights_t *cap_rights_init(cap_rights_t *rights, ...);
void cap_rights_set(cap_rights_t *rights, ...);
void cap_rights_clear(cap_rights_t *rights, ...);
bool cap_rights_is_set(const cap_rights_t *rights, ...);
bool cap_rights_is_valid(const cap_rights_t *rights);
void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src);
void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src);
bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little);
Capability rights to the cap_rights_init(), cap_rights_set(),
cap_rights_clear() and cap_rights_is_set() functions are provided by
separating them with commas, eg:
cap_rights_t rights;
cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT);
There is no need to terminate the list of rights, as those functions are
actually macros that take care of the termination, eg:
#define cap_rights_set(rights, ...) \
__cap_rights_set((rights), __VA_ARGS__, 0ULL)
void __cap_rights_set(cap_rights_t *rights, ...);
Thanks to using one bit as an array index we can assert in those functions that
there are no two rights belonging to different array elements provided
together. For example this is illegal and will be detected, because CAP_LOOKUP
belongs to element 0 and CAP_PDKILL to element 1:
cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL);
Providing several rights that belongs to the same array's element this way is
correct, but is not advised. It should only be used for aliases definition.
This commit also breaks compatibility with some existing Capsicum system calls,
but I see no other way to do that. This should be fine as Capsicum is still
experimental and this change is not going to 9.x.
Sponsored by: The FreeBSD Foundation
- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.
- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.
- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.
- The cap_getrights(2) syscall is renamed to cap_rights_get(2).
- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.
- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).
- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.
- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.
- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:
CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.
Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).
Added CAP_SYMLINKAT:
- Allow for symlinkat(2).
Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).
Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.
Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.
Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.
Removed CAP_MAPEXEC.
CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.
Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).
Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.
CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).
CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).
Added convinient defines:
#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE
#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)
Added defines for backward API compatibility:
#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)
Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib
In the old TTY layer, SIGTTIN was correctly handled like this:
while (data should be read) {
send SIGTTIN if not foreground process group
read data
}
In the new TTY layer, however, this behaviour was changed, based on a
false interpretation of the standard:
send SIGTTIN if not foreground process group
while (data should be read) {
read data
}
Correct this by pushing tty_wait_background() into the ttydisc_read_*()
functions.
Reported by: koitsu
PR: kern/173010
MFC after: 2 weeks
dev = make_dev_cred();
dev->si_drv1 = tp;
leaves a small window where the newly created device may be opened
and si_drv1 is NULL.
As this is a vary rare situation, using a lock to close the window
seems overkill. Instead just wait for the assignment of si_drv1.
Suggested by: kib
MFC after: 1 week
Uftdi(4) examines (c_iflag & (IXON|IXOFF)) to control hw XON-XOFF support.
This is obviously no good, if changes to those bits are not communicated
down the stack.
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
In revision 223722 we introduced support for driver ioctls on init/lock
state devices. Unfortunately the call to ttydevsw_cioctl() clobbers the
value of the error variable, meaning that in many cases ioctl() will now
return ENOTTY, even though the ioctl() was processed properly.
Reported by: Boris Samorodov <bsam ipt ru>
Patch by: jilles@
Approved by: re@ (kib@)
If a selinfo object is recorded (via selrecord()) and then it is
quickly destroyed, with the waiters missing the opportunity to awake,
at the next iteration they will find the selinfo object destroyed,
causing a PF#.
That happens because the selinfo interface has no way to drain the
waiters before to destroy the registered selinfo object. Also this
race is quite rare to get in practice, because it would require a
selrecord(), a poll request by another thread and a quick destruction
of the selrecord()'ed selinfo object.
Fix this by adding the seldrain() routine which should be called
before to destroy the selinfo objects (in order to avoid such case),
and fix the present cases where it might have already been called.
Sometimes, the context is safe enough to prevent this type of race,
like it happens in device drivers which installs selinfo objects on
poll callbacks. There, the destruction of the selinfo object happens
at driver detach time, when all the filedescriptors should be already
closed, thus there cannot be a race.
For this case, mfi(4) device driver can be set as an example, as it
implements a full correct logic for preventing this from happening.
Sponsored by: Sandvine Incorporated
Reported by: rstone
Tested by: pluknet
Reviewed by: jhb, kib
Approved by: re (bz)
MFC after: 3 weeks
kernel for FreeBSD 9.0:
Add a new capability mask argument to fget(9) and friends, allowing system
call code to declare what capabilities are required when an integer file
descriptor is converted into an in-kernel struct file *. With options
CAPABILITIES compiled into the kernel, this enforces capability
protection; without, this change is effectively a no-op.
Some cases require special handling, such as mmap(2), which must preserve
information about the maximum rights at the time of mapping in the memory
map so that they can later be enforced in mprotect(2) -- this is done by
narrowing the rights in the existing max_protection field used for similar
purposes with file permissions.
In namei(9), we assert that the code is not reached from within capability
mode, as we're not yet ready to enforce namespace capabilities there.
This will follow in a later commit.
Update two capability names: CAP_EVENT and CAP_KEVENT become
CAP_POST_KEVENT and CAP_POLL_KEVENT to more accurately indicate what they
represent.
Approved by: re (bz)
Submitted by: jonathan
Sponsored by: Google Inc
The cioctl() hook can be used by drivers to add ioctls to the *.init and
*.lock devices. This commit breaks the ttydevsw ABI, since this
structure didn't provide any padding. To prevent ABI breakage in the
future, add a tsw_spare.
Submitted by: Peter Jeremy <peter jeremy alcatel lucent com>
Obtained from: kern/152254 (slightly modified)
Instead of adding custom checks to wait for DCD on open(), just modify
the termios structure to set CLOCAL. This means SIGHUP is no longer
generated when losing DCD as well.
Reviewed by: kib@
MFC after: 1 week
This makes /dev/console more fail-safe and prevents a potential console
lock-up during boot.
Discussed on: stable@
Tested by: koitsu@
MFC after: 1 week
cdev will never be destroyed. Propagate the flag to devfs vnodes as
VV_ETERNVALDEV. Use the flags to avoid acquiring devmtx and taking a
thread reference on such nodes.
In collaboration with: pho
MFC after: 1 month
There are special cases where tty_rel_free() can be called twice in a
row, namely when closing and revoking the TTY at the same moment. Only
call destroy_dev_sched_cb() once.
Reported by: Jeremie Le Hen
MFC after: 1 week
It looks like I didn't implement this when I imported MPSAFE TTY.
Applications like mail(1) still use this. I think it's conceptually bad.
Tested by: Pete French <petefrench ticketswitch com>
MFC after: 2 weeks
