sent SIGHUP and SIGCONT if any of the processes are stopped. Currently this
behavior is triggered for any type of process stop including ptrace() stops
and transient stops for single threading during exit() and execve().
Thus, if a debugger is attached to a process in a group when the leader
exits, the entire group can be HUPed. Instead, only send the signals if a
process in the group is stopped due to SIGSTOP.
PR: 201149
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3681
running thread.
It is currently implemented only on amd64 and i386; on these
architectures, it is implemented by raising an NMI on the CPU on which
the target thread is currently running. Unlike stack_save_td(), it may
fail, for example if the thread is running in user mode.
This change also modifies the kern.proc.kstack sysctl to use this function,
so that stacks of running threads are shown in the output of "procstat -kk".
This is handy for debugging threads that are stuck in a busy loop.
Reviewed by: bdrewery, jhb, kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3256
SIGCHLD signal, should keep full 32 bits of the status passed to the
_exit(2).
Split the combined p_xstat of the struct proc into the separate exit
status p_xexit for normal process exit, and signalled termination
information p_xsig. Kernel-visible macro KW_EXITCODE() reconstructs
old p_xstat from p_xexit and p_xsig. p_xexit contains complete status
and copied out into si_status.
Requested by: Joerg Schilling
Reviewed by: jilles (previous version), pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Use the same scheme implemented to manage credentials.
Code needing to look at process's credentials (as opposed to thred's) is
provided with *_proc variants of relevant functions.
Places which possibly had to take the proc lock anyway still use the proc
pointer to access limits.
When providing memory map information to userland, populate the vnode pointer
for tmpfs files. Set the memory mapping to appear as a vnode type, to match
FreeBSD 9 behavior.
This fixes the use of tmpfs files with the dtrace pid provider,
procstat -v, procfs, linprocfs, pmc (pmcstat), and ptrace (PT_VM_ENTRY).
Submitted by: Eric Badger <eric@badgerio.us> (initial revision)
Obtained from: Dell Inc.
PR: 198431
MFC after: 2 weeks
Reviewed by: jhb
Approved by: kib (mentor)
ctld(8) child processes to indicate initiator address and name in
their titles, similar to what iscsid(8) child processes do.
PR: 181352
Differential Revision: https://reviews.freebsd.org/D2363
Reviewed by: rwatson@, mjg@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This allows us to get rid of bzero which was added specifically to make
mtx_init on p_mtx reliable.
This also fixes a potential problem where mtx_init on other mutexes
could trip over on unitialized memory and fire an assertion.
Reviewed by: kib
strings returned to userland include the nulterm byte.
Some uses of sbuf_new_for_sysctl() write binary data rather than strings;
clear the SBUF_INCLUDENUL flag after calling sbuf_new_for_sysctl() in
those cases. (Note that the sbuf code still automatically adds a nulterm
byte in sbuf_finish(), but since it's not included in the length it won't
get copied to userland along with the binary data.)
Remove explicit adding of a nulterm byte in a couple places now that it
gets done automatically by the sbuf drain code.
PR: 195668
feature is to quisce the system before suspend.
Stop is implemented by reusing the thread_single(9) with the special
mode SINGLE_ALLPROC. SINGLE_ALLPROC differs from the existing
single-threading modes by allowing (requiring) caller to operate on
other process. Interruptible sleeps for !TDF_SBDRY threads are
suspended like SIGSTOP does it, instead of aborting the sleep, like
SINGLE_NO_EXIT, to avoid spurious EINTRs on resume.
Provide debugging sysctl debug.stop_all_proc, which causes total stop
and suspends syncer, while waiting for variable reset for resume. It
is used for debugging; should be removed after the real use of the
interface is added.
In collaboration with: pho
Discussed with: avg
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- Threads lifetime cycle, in particular, counting of the threads in
the process, and interlocking with process mutex and thread lock.
The main reason of this is that turnstile locks are after thread
locks, so you e.g. cannot unlock blockable mutex (think process
mutex) while owning thread lock.
- Virtual and profiling itimers, since the timers activation is done
from the clock interrupt context. Replace the p_slock by p_itimmtx
and PROC_ITIMLOCK().
- Profiling code (profil(2)), for similar reason. Replace the p_slock
by p_profmtx and PROC_PROFLOCK().
- Resource usage accounting. Need for the spinlock there is subtle,
my understanding is that spinlock blocks context switching for the
current thread, which prevents td_runtime and similar fields from
changing (updates are done at the mi_switch()). Replace the p_slock
by p_statmtx and PROC_STATLOCK().
The split is done mostly for code clarity, and should not affect
scalability.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
rather than u_char.
To try and play nice with the ABI, the u_char CPU ID values are clamped
at 254. The new fields now contain the full CPU ID, or -1 for no cpu.
Differential Revision: D955
Reviewed by: jhb, kib
Sponsored by: Norse Corp, Inc.
the upper layers, which interpret it as errno value, which happens to
be ERESTART. The result was spurious restarts of the sysctls in loop,
e.g. kern.proc.proc, instead of returning ENOMEM to caller.
Convert -1 from sbuf_bcat() to ENOMEM, when returning to the callers
expecting errno.
In collaboration with: pho
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 1 week
Add a separate field which exports tracer pid and add a new keyword
("tracer") for ps to display it.
This is a follow up to r270444.
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
One problem is inferior(9) looping due to the process tree becoming a
graph instead of tree if the parent is traced by child. Another issue
is due to the use of p_oppid to restore the original parent/child
relationship, because real parent could already exited and its pid
reused (noted by mjg).
Add the function proc_realparent(9), which calculates the parent for
given process. It uses the flag P_TREE_FIRST_ORPHAN to detect the head
element of the p_orphan list and than stepping back to its container
to find the parent process. If the parent has already exited, the
init(8) is returned.
Move the P_ORPHAN and the new helper flag from the p_flag* to new
p_treeflag field of struct proc, which is protected by proctree lock
instead of proc lock, since the orphans relationship is managed under
the proctree_lock already.
The remaining uses of p_oppid in ptrace(PT_DETACH) and process
reapping are replaced by proc_realparent(9).
Phabric: D417
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- Move the code to calculate resident count into separate function.
It reduces the indent level and makes the operation of
vmmap_skip_res_cnt tunable more clear.
- Optimize the calculation of the resident page count for map entry.
Skip directly to the next lowest available index and page among the
whole shadow chain.
- Restore the use of pmap_incore(9), only to verify that current
mapping is indeed superpage.
- Note the issue with the invalid pages.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
amount of resident pages, in fact calculates the amount of installed
pte entries in the region. Resident pages which were not soft-faulted
yet are not counted.
Calculate the amount of resident pages by looking in the objects chain
backing the region.
Add a knob to disable the residency calculation at all. For large
sparce regions, either previous or updated algorithm runs for too long
time, while several introspection tools do not need the (advisory) RSS
value at all.
PR: kern/188911
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
given process.
Note that the correctness of the trampoline length returned for ABIs
which do not use shared page depends on the correctness of the struct
sysvec sv_szsigcodebase member, which will be fixed on as-need basis.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
exhausted.
- Add a new protect(1) command that can be used to set or revoke protection
from arbitrary processes. Similar to ktrace it can apply a change to all
existing descendants of a process as well as future descendants.
- Add a new procctl(2) system call that provides a generic interface for
control operations on processes (as opposed to the debugger-specific
operations provided by ptrace(2)). procctl(2) uses a combination of
idtype_t and an id to identify the set of processes on which to operate
similar to wait6().
- Add a PROC_SPROTECT control operation to manage the protection status
of a set of processes. MADV_PROTECT still works for backwards
compatability.
- Add a p_flag2 to struct proc (and a corresponding ki_flag2 to kinfo_proc)
the first bit of which is used to track if P_PROTECT should be inherited
by new child processes.
Reviewed by: kib, jilles (earlier version)
Approved by: re (delphij)
MFC after: 1 month
ps(1) utility, e.g. "ps -O fib".
bin/ps/keyword.c:
Add the "fib" keyword and default its column name to "FIB".
bin/ps/ps.1:
Add "fib" as a supported keyword.
sys/compat/freebsd32/freebsd32.h:
sys/kern/kern_proc.c:
sys/sys/user.h:
Add the default fib number for a process (p->p_fibnum)
to the user land accessible process data of struct kinfo_proc.
Submitted by: Oliver Fromme <olli@fromme.com>, gibbs
using SDT_PROBE_ARGTYPE(). This will make it easy to extend the SDT(9) API
to allow probes with dynamically-translated types.
There is no functional change.
MFC after: 2 weeks
and kern_proc_vmmap_out() functions to output process kinfo structures
to sbuf, to make the code reusable.
The functions are going to be used in the coredump routine to store
procstat info in the core program header notes.
Reviewed by: kib
MFC after: 3 weeks
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
zombie list for the pid. This allows several kern.proc sysctls to
report useful information for zombies.
Hold the allproc_lock around all searches instead of relocking it.
Remove private pfind_locked() from the new nfs client code.
Requested and reviewed by: pjd
Tested by: pho
MFC after: 3 weeks
pgrp2 was used only for debugging, but pgrp2 = pgfind(..) was present in compiled code even for kernels without INVARIANTS
Approved by: trasz (mentor)
MFC after: 1 week
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
to pull vm_param.h was removed. Other big dependency of vm_page.h on
vm_param.h are PA_LOCK* definitions, which are only needed for
in-kernel code, because modules use KBI-safe functions to lock the
pages.
Stop including vm_param.h into vm_page.h. Include vm_param.h
explicitely for the kernel code which needs it.
Suggested and reviewed by: alc
MFC after: 2 weeks
to the process id. It follows the ptrace(2) interface and allows debugging
libraries to use thread ids directly, without slow and verbose conversion
of thread id into pid.
The PGET_NOTID flag is provided to allow a specific sysctl to disallow
this behaviour. All current callers of pget(9) have useful semantic to
operate on tid and do not need this flag.
Reviewed by: jhb, trocini
MFC after: 1 week
- retrive only one, specified limit for a process, not the whole
array, as it was previously (the sysctl has been added recently and
has not been backported to stable yet, so this change is ok);
- allow to set a resource limit for another process.
Submitted by: Andrey Zonov <andrey at zonov.org>
Discussed with: kib
Reviewed by: kib
MFC after: 2 weeks
