0. This makes it difficult to do efficient manipulation of the
struct pollfd since you can't leave a slot empty.
PR: 8599
Submitted-by: Marc Slemko <marcs@znep.com>
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.
These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.
Reviewed by: Bruce Evans <bde@zeta.org.au>
Reviewed by: Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by: Mike Spengler <mks@networkcs.com>
problem is worked around by using an interrupt gate for the page
fault handler. This code was originally made for NetBSD/pc98 by
Naofumi Honda <honda@kururu.math.sci.hokudai.ac.jp> and has already
been in PC98 tree. Because of this bug, trap_fatal cannot show
correct page fault address if %cr2 is obtained in this function.
Therefore, trap_fatal uses the value from trap() function.
- The trap handler always enables interruption when buggy application
or kernel code has disabled interrupts and then trapped. This code
was prepared by Bruce Evans <bde@FreeBSD.org>.
Submitted by: Bruce Evans <bde@FreeBSD.org>
Naofumi Honda <honda@kururu.math.sci.hokudai.ac.jp>
can set if your hw/sw produces the "calcru negative..." message.
Setting the alternate method (sysctl -w kern.timecounter.method=1)
makes the the get{nano|micro}*() functions call the real thing at
resulting in a measurable but minor overhead.
I decided to NOT have the "calcru" change the method automatically
because you should be aware of this problem if you have it.
The problems currently seen, related to usleep and a few other corners
are fixed for both methods.
runtime. p_runtime is unsigned while p_cpulimit is not, so this avoids the
nasty side effect of the process getting killed when the runtime comes up
"negative" due to other bugs.
out interrupts for too long. If you still see the "calcru: negative
time..." message you can increase NTIMECOUNTER (see LINT).
Sideeffect is that a timecounter is required to not wrap around in
less than (1 + delta) seconds instead of the (1/hz + delta) required
until now.
Many thanks to: msmith, wpaul, wosch & bde
from an interrupt context and fsetown() wants to peek at curproc, call
malloc(..., M_WAITOK), and fiddle with various unprotected data structures.
The fix is to move the code that duplicates the F_SETOWN/FIOSETOWN state
of the original socket to the new socket from sonewconn() to accept1(),
since accept1() runs in the correct context. Deferring this until the
process calls accept() is harmless since the process can't do anything
useful with SIGIO on the new socket until it has the descriptor for that
socket.
One could make the case for not bothering to duplicate the
F_SETOWN/FIOSETOWN state and requiring the process to explicitly make the
fcntl() or ioctl() call on the new socket, but this would be incompatible
with the previous implementation and might break programs which rely on
the old semantics.
This bug was discovered by Andrew Gallatin <gallatin@cs.duke.edu>.
Many (mostly machine-dependent ones) are still missing. NIST-PCTS found
this bug for all the ioctls used to implement the POSIX tc* functions
(TIOCCBRK, TIOCDRAIN, TIOCSPGRP, TIOCSBRK, TIOCSTART and TIOCSTOP), and
I found FIOASYNC, TIOCCONS, TIOCEXCL, TIOCHPCL, TIOCNXCL, TIOCSCTTY and
TIOCSDRAINWAIT by inspection. TIOCSPGRP was ifdefed out for some reason.
Handle tcsetattr()'s historical speed conversions correctly and more
centrally:
- don't store speeds of 0 in the final termios struct. Drivers can now
depend on tp->t_ispeed and tp->t_ospeed giving the actual speed.
Applications can now depend on tcgetattr() being POSIX.1 conformant.
- convert from a proposed input speed of 0 to the proposed output speed
(except if that is 0, convert to the current output speed). Drivers
can now depend on the proposed input speed being nonzero.
- don't reject negative speeds. Negative speeds can't happen now that
speed_t is unsigned, and rejecting invalid speeds is a bug - tcsetattr()
is supposed to succeed if it can "perform any of the requested actions",
so it shouldn't fail in practice.
bio interrupts, and a truncated file that along with the precise alignment
of the planets could result in a page being freed multiple times or a
just-freed page being put onto the inactive queue.
system, the mapping from logical to physical block number may be lost.
Hence we have to check for a reconstituted buffer and redo the call to
VOP_BMAP if the physical block number has been lost.
devstat_end_transaction error message that gets printed whenever the
busy count is < 0.
This will help catch drivers that improperly implement devstat(9) support.
MALLOC_DEFINE() and MALLOC_DEFINE() is needed by the recently
reenabled "reallocblks" code, but <sys/kernel.h> was only included
if CLUSTERDEBUG was defined. This was too harmless. gcc only
warns about garbage like `SYSINIT(blech);' at file scope ...
- Interface wth the new resource manager.
- Allow for multiple drivers implementing a single devclass.
- Remove ordering dependencies between header files.
- Style cleanup.
- Add DEVICE_SUSPEND and DEVICE_RESUME methods.
- Move to a single-phase interrupt setup scheme.
Kernel builds on the Alpha are brken until Doug gets a chance to incorporate
these changes on that side.
Agreed to in principle by: dfr
This avoids the fsck-on-reboot symptoms if you're shutting down with a
hung or unreachable NFS server mounted. Also remove non-local
filesystems from the mount list to prevent the system hanging when it tries
to unmount them (for the same reason).
Drew points out that there's a good argument for forcibly removing all
"non syncable" filesystems from the mount list (eg. NFS mounts, disks
that aren't responding, etc.) as this then allows you to sync and
cleanly unmount their parents. No such change is included in this
patch.
Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
basically do a on-the-fly defragmentation of the FFS filesystem, changing
file block allocations to make them contiguous. Thanks to Kirk McKusick
for providing hints on what needed to be done to get this working.
linker. This is intended to replace kvm_mkdb etc. The first version
only does name->value lookups, but it's open ended. value->name lookups
would probably be a good thing to do too.
It's been suggested to try and connect the symbol tables to sysctl (which
is probably a more flexible way of doing it if it's done right), but that
is far more complex and difficult than I was ready to have a shot at.
by bde, a few other tweaks to get the patch to apply cleanly again and
some improvements to the comments.
This change closes some fairly minor security holes associated with
F_SETOWN, fixes a few bugs, and removes some limitations that F_SETOWN
had on tty devices. For more details, see the description on the PR.
Because this patch increases the size of the proc and pgrp structures,
it is necessary to re-install the includes and recompile libkvm,
the vinum lkm, fstat, gcore, gdb, ipfilter, ps, top, and w.
PR: kern/7899
Reviewed by: bde, elvind
leaked memory on each unload and were limited to items referenced in
the kernel copy of vnode_if.c. Now a kernel module is free to create
it's own VOP_FOO() routines and the rest of the system will happily
deal with it, including passthrough layers like union/umap/etc.
Have VFS_SET() call a common vfs_modevent() handler rather than
inline duplicating the common code all over the place.
Have VNODEOP_SET() have the vnodeops removed at unload time (assuming a
module) so that the vop_t ** vector is reclaimed.
Slightly adjust the vop_t ** vectors so that calling slot 0 is a panic
rather than a page fault. This could happen if VOP_something() was called
without *any* handlers being present anywhere (including in vfs_default.c).
slot 1 becomes the default vector for the vnodeop table.
TODO: reclaim zones on unload (eg: nfs code)
removed at module unload (if in a module of course).
However; this introduces a new dependency on <sys/kernel.h> for things
that use MALLOC_DECLARE(). Bruce told me it is better to add sys/kernel.h
to the handful of files that need it rather than add an extra include to
sys/malloc.h for kernel compiles. Updates to follow in subsequent commits.
