Restore state 6. Many of the UNH tests end up exercising this
state, where we have a new neighbor cache entry and a new link-layer
entry is being created for it. The link-layer address is currently
unknown so the initial state of the "llentry" should remain initialized
to ND6_LLINFO_NOSTATE so that the ND code will send a solicitation.
Setting this to ND6_LLINFO_STALE implies that the link-level entry
is valid and can be used (but needs to be refreshed via the Neighbor
Unreachability state machine).
https://forums.freebsd.org/threads/64287/
Submitted by: Farrell Woods <Farrell_Woods@Dell.com>
Reviewed by: mjoras, dab, ae
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14059
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
sys/netinet6/icmp6.c
Use the interface's FIB for source address selection in ICMPv6 error
responses.
sys/netinet6/in6.c
In in6_newaddrmsg, announce arrival of local addresses on the
interface's FIB only. In in6_lltable_rtcheck, use a per-fib ND6
cache instead of a single cache.
sys/netinet6/in6_src.c
In in6_selectsrc, use the caller's fib instead of the default fib.
In in6_selectsrc_socket, remove a superfluous check.
sys/netinet6/nd6.c
In nd6_lle_event, use the interface's fib for routing socket
messages. In nd6_is_new_addr_neighbor, check all FIBs when trying
to determine whether an address is a neighbor. Also, simplify the
code for point to point interfaces.
sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
Make defrouter_select fib-aware, and make all of its callers pass in
the interface fib.
sys/netinet6/nd6_nbr.c
When inputting a Neighbor Solicitation packet, consider the
interface fib instead of the default fib for DAD. Output NS and
Neighbor Advertisement packets on the correct fib.
sys/netinet6/nd6_rtr.c
Allow installing the same host route on different interfaces in
different FIBs. If rt_add_addr_allfibs=0, only install or delete
the prefix route on the interface fib.
tests/sys/netinet/fibs_test.sh
Clear some expected failures, but add a skip for the newly revealed
BUG217871.
PR: 196361
Submitted by: Erick Turnquist <jhujhiti@adjectivism.org>
Reported by: Jason Healy <jhealy@logn.net>
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9451
This interface type ("a parent interface of wlanX") is not used since
r287197
Reviewed by: adrian, glebius
Differential Revision: https://reviews.freebsd.org/D9308
This change extends the nd6 lock to protect the ND prefix list as well
as the list of advertising routers associated with each prefix. To handle
cases where the nd6 lock must be dropped while iterating over either the
prefix or default router lists, a generation counter is used to track
modifications to the lists. Additionally, a new mutex is used to serialize
prefix on-link/off-link transitions. This mutex must be acquired before
the nd6 lock and is held while updating the routing table in
nd6_prefix_onlink() and nd6_prefix_offlink().
Reviewed by: ae, tuexen (SCTP bits)
Tested by: Jason Wolfe <jason@llnw.com>,
Larry Rosenman <ler@lerctr.org>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D8125
r301217 re-added per-connection L2 caching from a previous change,
but it omitted caching in the fast path. Add it.
Reviewed By: gallatin
Approved by: gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D7239
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
but removed due to other changes in the system. Restore the llentry pointer
to the "struct route", and use it to cache the L2 lookup (ARP or ND6) as
appropriate.
Submitted by: Mike Karels
Differential Revision: https://reviews.freebsd.org/D6262
When expiring a neighbour cache entry we may need to look up the associated
default router, which requires the nd6 read lock. To avoid an LOR, the nd6
lock should be acquired first.
X-MFC-With: r296063
Tested by: Larry Rosenman <ler@lerctr.org> (previous revision)
Factor out nd6 and in6_attach initialization to their own files.
Also move destruction into those files though still called from
the central initialization.
Sponsored by: CK Software GmbH
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D5033
This addresses a number of race conditions that can cause crashes as a
result of unsynchronized access to the list.
PR: 206904
Tested by: Larry Rosenman <ler@lerctr.org>,
Kevin Bowling <kevin.bowling@kev009.com>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D5315
entries data in unified format.
There are control plane functions that require information other than
just next-hop data (e.g. individual rtentry fields like flags or
prefix/mask). Given that the goal is to avoid rte reference/refcounting,
re-use rt_addrinfo structure to store most rte fields. If caller wants
to retrieve key/mask or gateway (which are sockaddrs and are allocated
separately), it needs to provide sufficient-sized sockaddrs structures
w/ ther pointers saved in passed rt_addrinfo.
Convert:
* lltable new records checks (in_lltable_rtcheck(),
nd6_is_new_addr_neighbor().
* rtsock pre-add/change route check.
* IPv6 NS ND-proxy check (RADIX_MPATH code was eliminated because
1) we don't support RTF_ANNOUNCE ND-proxy for networks and there should
not be multiple host routes for such hosts 2) if we have multiple
routes we should inspect them (which is not done). 3) the entire idea
of abusing KRT as storage for ND proxy seems odd. Userland programs
should be used for that purpose).
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
Before the change, things like lle state were queried via
SIOCGNBRINFO_IN6 by ndp(8) for _each_ lle entry in dump.
This ioctl was added in 1999, probably to avoid touching rtsock code.
This change maps SIOCGNBRINFO_IN6 data to standard rtsock dump the
following way:
expire (already) maps to rtm_rmx.rmx_expire
isrouter -> rtm_flags & RTF_GATEWAY
asked -> rtm_rmx.rmx_pksent
state -> rtm_rmx.rmx_state (maps to rmx_weight via define)
Reviewed by: ae
When using lagg failover mode neither Gratuitous ARP (IPv4) or Unsolicited
Neighbour Advertisements (IPv6) are sent to notify other nodes that the
address may have moved.
This results is slow failover, dropped packets and network outages for the
lagg interface when the primary link goes down.
We now use the new if_link_state_change_cond with the force param set to
allow lagg to force through link state changes and hence fire a
ifnet_link_event which are now monitored by rip and nd6.
Upon receiving these events each protocol trigger the relevant
notifications:
* inet4 => Gratuitous ARP
* inet6 => Unsolicited Neighbour Announce
This also fixes the carp IPv6 NA's that stopped working after r251584 which
added the ipv6_route__llma route.
The new behavour can be controlled using the sysctls:
* net.link.ether.inet.arp_on_link
* net.inet6.icmp6.nd6_on_link
Also removed unused param from lagg_port_state and added descriptions for the
sysctls while here.
PR: 156226
MFC after: 1 month
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4111
Certain interfaces (e.g. pfsync0) do not have ip6 addresses (in other words,
ifp->if_afdata[AF_INET6] is NULL). Ensure we don't panic when the MTU is
updated.
pfsync interfaces will never have ip6 support, because it's explicitly disabled
in in6_domifattach().
PR: 205194
Reviewed by: melifaro, hrs
Differential Revision: https://reviews.freebsd.org/D4522
LLE structure is mostly unchanged during its lifecycle: there are only 2
things relevant for fast path lookup code:
1) link-level address change. Since r286722, these updates are performed
under AFDATA WLOCK.
2) Some sort of feedback indicating that this particular entry is used so
we send NS to perform reachability verification instead of expiring entry.
The only signal that is needed from fast path is something like binary
yes/no.
The latter is solved by the following changes:
Special r_skip_req (introduced in D3688) value is used for fast path feedback.
It is read lockless by fast path, but updated under req_mutex mutex. If this
field is non-zero, then fast path will acquire lock and set it back to 0.
After transitioning to STALE state, callout timer is armed to run each
V_nd6_delay seconds to make sure that if packet was transmitted at the start
of given interval, we would be able to switch to PROBE state in V_nd6_delay
seconds as user expects.
(in STALE state) timer is rescheduled until original V_nd6_gctimer expires
keeping lle in STALE state (remaining timer value stored in lle_remtime).
(in STALE state) timer is rescheduled if packet was transmitted less that
V_nd6_delay seconds ago to make sure we transition to PROBE state exactly
after V_n6_delay seconds.
As a result, all packets towards lle in REACHABLE/STALE/PROBE states are handled
by fast path without acquiring lle read lock.
Differential Revision: https://reviews.freebsd.org/D3780
by filter function instead of picking into routing table details in
each consumer.
Remove now-unused rt_expunge() (eliminating last external RTF_RNH_LOCKED
user).
This simplifies future nexthops/mulitipath changes and rtrequest1_fib()
locking refactoring.
Actual changes:
Add "rt_chain" field to permit rte grouping while doing batched delete
from routing table (thus growing rte 200->208 on amd64).
Add "rti_filter" / "rti_filterdata" / "rti_spare" fields to rt_addrinfo
to pass filter function to various routing subsystems in standard way.
Convert all rt_expunge() customers to new rt_addinfo-based api and eliminate
rt_expunge().
new return codes of -1 were mistakenly being considered "true". Callout_stop
now returns -1 to indicate the callout had either already completed or
was not running and 0 to indicate it could not be stopped. Also update
the manual page to make it more consistent no non-zero in the callout_stop
or callout_reset descriptions.
MFC after: 1 Month with associated callout change.
For case (7) (new entry) nothing has to be done except lle_event.
Invoke this event directly from "create new lle" code block.
For case (4) (existing entry, same mac) useless mac update was performed,
along with LLENTRY_RESOLVED lle_event. There was no sense in doing that,
since nothing really had changed. Simply avoid this condition instead.
Given that, condition was simplified to (3),(5) states which can be merged
with previous block.
Effectively it always returned NULL so SAS was always performed and
sometimes the result might have been different.
Fix state machine change accidentally introduced in r287985:
state (4) inside nd6_cache_lladdr() (existing entry got nd message
with the same lladdress) started to cause lle state transition to STALE
instead of no-action.
catches cases that DAD probes cannot be sent because of
IFF_UP && !IFF_DRV_RUNNING.
- nd6_dad_starttimer() now calls nd6_dad_ns_output(), instead of
calling it before nd6_dad_starttimer().
- Do not release an entry in dadq when a duplicate entry is being
added.
Initially function was introduced in r53541 (KAME initial commit) to
"provide hints from upper layer protocols that indicate a connection
is making "forward progress"" (quote from RFC 2461 7.3.1 Reachability
Confirmation).
However, it was converted to do nothing (e.g. just return) in r122922
(tcp_hostcache implementation) back in 2003. Some defines were moved
to tcp_var.h in r169541. Then, it was broken (for non-corner cases)
by r186119 (L2<>L3 split) in 2008 (NULL ifp in nd6_lookup). So,
right now this code is broken and has no "real" base users.
Differential Revision: https://reviews.freebsd.org/D3699
function. The change is mostly mechanical with the following exception:
Last piece of nd6_resolve_slow() was refactored: ND6_LLINFO_PERMANENT
condition was removed as always-true, explicit ND6_LLINFO_NOSTATE ->
ND6_LLINFO_INCOMPLETE state transition was removed as duplicate.
Reviewed by: ae
Sponsored by: Yandex LLC
* Since new extries are now allocated explicitly, fill in
all the necessary fields for lle _before_ attaching it to the table.
* Remove ND6_LLINFO_INCOMPLETE check which was unused even in
first KAME merge (r53541).
* After that, the only new state that function can set, was
ND6_LLINFO_STALE. Given everything above, simplify logic besides
do_update and is_newentry.
* Fix nd_resolve() comment.
