Use non-blocking I/O to write as much as the pipe will accept (often 64K,
but it can be as little as 4K), avoiding the need for the ugly PIPESIZE
constant. If PIPESIZE was set too high, a deadlock would occur.
It now passes WARNS=7 with clang on i386.
GCC 4.2.1 does not understand setjmp() properly so will always trigger
-Wuninitialized. I will not add the volatile keywords to suppress this.
In some other shells, things like $((a);(b)) are command substitutions.
Also, there are shells that have an extension ((ARITH)) that evaluates an
arithmetic expression and returns status 1 if the result is zero, 0
otherwise. This extension may lead to ambiguity with two subshells starting
in sequence.
If syntactically invalid job identifiers are to be taken as jobs that exited
with status 127, this should not apply to options, so that we can add
options later if need be.
This ensures 'return' in a trap returns the correct status to the caller.
If evalskip is not set or if it is overridden by a previous evalskip, keep
the old behaviour of restoring the exit status from before the trap.
If a stack mark is set while the current stack block is empty, the stack
block may move later on (because of realloc()) and the stack mark needs to
be updated. This updating does not happen after popstackmark() has been
called; therefore, call setstackmark() again if the stack mark is still
being used.
For some reason, this only affects a few users. I cannot reproduce it. The
situation seems quite rare as well because an empty stack block would
usually be freed (by popstackmark()) before execution reaches a
setstackmark() call.
PR: 175922
Tested by: KT Sin
Now it outputs fixed files, which use constants provided by the C standard
library to determine appropriate values for the target machine.
Before, mksyntax inspected the host machine which resulted in subtle
breakage if e.g. char is signed on the host and unsigned on the target such
as when cross-compiling on x86 for ARM.
Tested using -funsigned-char on amd64. Compiling build-tools without it and
sh itself with it causes various tests to fail without this change but not
with this change. With consistent -funsigned-char, tests pass with or
without this change.
The mksyntax program could be removed and syntax.c and syntax.h committed to
the repository.
Submitted by: Christoph Mallon
MFC after: 2 weeks
ISO/IEC 9899:1999 (E) 5.2.1p3 guarantees that the values of the characters
0123456789 are contiguous.
The generated syntax.c and syntax.h remain the same.
Submitted by: Christoph Mallon
Expand here documents at the same point other redirections are expanded but
use a non-fork subshell environment (like simple command substitutions) for
compatibility. Substitition errors result in an empty here document like
before.
As a result, a fork is avoided for short (<4K) expanded here documents.
Unexpanded here documents (with quoted end marker after <<) are not affected
by this change. They already only forked when >4K.
Side effects:
* Order of expansion is slightly different.
* Slow expansions are not executed in parallel with the redirected command.
* A non-fork subshell environment is subtly different from a forked process.
If a loop contained certain commands (such as redirected compound commands),
the temporary memory for the redirection was not freed between iterations of
the loop but only after the loop.
Put a stackmark in evaltree(), freeing memory whenever a node has been
evaluated. Some other stackmarks are then redundant; remove them.
Example:
while :; do { :; } </dev/null; done
Instead of rechecking relative paths for all hashed utilities after a cd,
track if any utility in cmdtable depends on a relative path in PATH.
If there is such a utility, cd clears the entire table.
As a result, the '*' in hash no longer happens.
Accessing sys_siglist directly requires rtld to copy it from libc to the sh
executable's BSS. Also, strsignal() will put in the signal number for
unknown signals (FreeBSD-specific) so we need not do that ourselves.
Unfortunately, there is no function for sys_signame.
If there is a write error on stdout, a message will be printed (to stderr)
and the exit status will be changed to 2 if it would have been 0 or 1.
PR: bin/158206
* The last character is not displayed.
* If the alias ends with itself (as a word), an infinite memory-eating loop
occurs.
If an alias is defined initially, a space is appended to avoid recursion but
this did not happen when an alias was later modified.
PR: bin/173418
Submitted by: Daniel F.
MFC after: 1 week
Although sufficient memory is available for a longer string in cmdname,
this is undefined behaviour anyway.
Side effect: for alignment reasons, an additional byte of memory is
allocated per hashed command.
This reduces code duplication and code size.
/usr/bin/printf is not affected.
Side effect: different error messages when certain builtins are passed
invalid options.
When waiting for child processes using "wait" or if "set -T" is in effect, a
signal interrupts the wait. Make sure there is no window where the signal
handler may be invoked (setting a flag) just before going to sleep.
There is a similar race condition in the shell language, but scripts can
avoid it by exiting from the trap handler or enforcing synchronization using
a fifo.
If SIGCHLD is not trapped, a signal handler must be installed for it. Only
install this handler for the duration of the wait to avoid triggering
unexpected [EINTR] errors elsewhere.
Note that for some reason only SIGINT and SIGQUIT interrupt a "wait"
command. This remains the case.
Examples:
export x=~
now expands the tilde
local y=$1
is now safe, even if $1 contains IFS characters or metacharacters.
For a word to "look like an assignment", it must start with a name followed
by an equals sign, none of which may be quoted.
The special treatment applies when the first word (potentially after
"command") is "export", "readonly" or "local". There may be quoting
characters but no expansions. If "local" is overridden with a function there
is no special treatment ("export" and "readonly" cannot be overridden with a
function).
If things like
local arr=(1 2 3)
are ever allowed in the future, they cannot call a "local" function. This
would either be a run-time error or it would call the builtin.
This matches Austin Group bug #351, planned for the next issue of POSIX.1.
PR: bin/166771
On recent versions of NetBSD's libedit, el_gets
now sets el_len to -1 on error so we can
distinguish between a NULL string and an error.
This fixes sh from exiting with newer versions
of libedit now allowing EINTR to return.
Obtained from: NetBSD
Reviewed by: jilles
MFC after: 3 weeks
1. Avoid a cd back into ${.CURDIR} to run mkbuiltins when we know make
will first cd into ${.OBJDIR}. Keep the cwd to what make sets it to.
2. Don't tell mkbuiltins where to write to (= ${.OBJDIR}), but where to
get sources from (= ${.CURDIR}). This to compensate for point 1.
This fixes a problem with bmake's mk files that optimize ${.OBJDIR} to
expand to "." after changing cwd, not taking into account that the
target is pretty much undoing that and not getting the full path to the
object tree anymore.
quotation. Also make sure we have the same amount of columns in each row as
the number of columns we specify in the head arguments.
Reviewed by: brueffer
This uses vfork() for simple commands and command substitutions containing a
single simple command, invoking an external program under certain conditions
(no redirections or variable assignments, non-interactive shell, no job
control). These restrictions limit the amount of code executed in a vforked
child.
There is a large speedup (for example 35%) in microbenchmarks. The
difference in buildkernel is smaller (for example 0.5%) but still
statistically significant. See
http://lists.freebsd.org/pipermail/freebsd-hackers/2012-January/037581.html
for some numbers.
The use of vfork() can be disabled by setting a variable named
SH_DISABLE_VFORK.
In the first command of a 'for', $? should be the exit status of the last
pipeline (command substitution in the word list or command before 'for'),
not always 0.
Before this fix, only the first statement of the trap was executed if
evalskip was set. This is for example the case when:
o "-e" is set for this shell
o a trap is set on EXIT
o a function returns 1 and causes the script to abort
Reviewed by: jilles
MFC after: 2 weeks
Also, rework evalcase() to not evaluate any tree. Instead, return the
NCLISTFALLTHRU node and handle it in evaltree().
Fixed bugs:
* If a ;& list with non-zero exit status is followed by an empty ;; or final
list, the exit status of the case command should be equal to the exit
status of the ;& list, not 0.
* An empty ;& case should not reset $?.
* If no pattern is matched, POSIX says the exit status shall be 0 (even if
there are command substitutions).
* If a pattern is matched and there are no command substitutions, the first
command should see the $? from before the case command, not always 0.
The errno message display added in r222292 did not take attempting to
cd to a non-directory or something that cannot be stat()ed into account.
PR: bin/164070
MFC after: 10 days
This improves performance for globs where a slash or another component
follows a component with metacharacters by eliminating unnecessary attempts
to open directories that are not.
This is not necessary: errors are already caught in evalbackcmd() and
forcelocal handles changes to variables.
Note that this depends on r223024.
MFC after: 4 weeks
Free expanded case text before executing commands.
Remove impossible evalskip checks (expanding an argument cannot set
evalskip anymore since $(break) and the like are properly executed in a
subshell environment).
Because sh executes commands in subshell environments without forking in
more and more cases (particularly from 8.0 on), it makes sense to describe
subshell environments more precisely using ideas from POSIX, together with
some FreeBSD-specific items.
In particular, the hash and times builtins may not behave as if their state
is copied for a subshell environment while leaving the parent shell
environment unchanged.
* Shell patterns are also for ${var#pat} and the like.
* An '!' by itself will not trigger pathname generation so do not call it a
meta-character, even though it has a special meaning directly after an
'['.
* Character ranges are locale-dependent.
* A '^' will complement a character class like '!' but is non-standard.
MFC after: 1 week
POSIX requires a -h option to sh and set, to locate and remember utilities
invoked by functions as they are defined. Given that this
locate-and-remember process is optional elsewhere, it seems safe enough to
make this option do nothing.
POSIX does not specify a long name for this option. Follow ksh in calling it
"trackall".
Replacing ;; with the new control operator ;& will cause the next list to be
executed as well without checking its pattern, continuing until a list ends
with ;; or until the end of the case statement. This is like omitting
"break" in a C "switch" statement.
The sequence ;& was formerly invalid.
This feature is proposed for the next POSIX issue in Austin Group issue
#449.
The eval special builtin now runs the code with EV_EXIT if it was run
with EV_EXIT itself.
In particular, this eliminates one fork when a command substitution contains
an eval command that ends with an external program or a subshell.
This is similar to what r220978 did for functions.
Have mkbuiltins write the prototypes for the *cmd functions to builtins.h
instead of builtins.c and include builtins.h in more .c files instead of
duplicating prototypes for *cmd functions in other headers.
In optimized command substitution, save and restore any variables changed by
expansions (${var=value} and $((var=assigned))), instead of trying to
determine if an expansion may cause such changes.
If $! is referenced in optimized command substitution, do not cause jobs to
be remembered longer.
This fixes $(jobs $!) again, simplifies the man page and shortens the code.
When I added UTF-8 support in r221646, the LC_COLLATE-based ordering broke
because of sign extension of char.
Because of libc restrictions, this does not work for UTF-8. For UTF-8
locales, ranges always use character code order.
In most cases, login shells are started from the home directory, but not in
all, such as xterm -ls.
This commit depends on r222957 for read_profile() performing parameter
expansion.
PR: bin/50569
The function name expandstr() and the general idea of doing this kind of
expansion by treating the text as a here document without end marker is from
dash.
All variants of parameter expansion and arithmetic expansion also work (the
latter is not required by POSIX but it does not take extra code and many
other shells also allow it).
Command substitution is prevented because I think it causes too much code to
be re-entered (for example creating an unbounded recursion of trace lines).
Unfortunately, our LINENO is somewhat crude, otherwise PS4='$LINENO+ ' would
be quite useful.
The "exp" builtin is undocumented, non-standard and not very useful.
If exp's return value is not used, something like
VAR=$(exp EXPRESSION)
is equivalent to
VAR=$((EXPRESSION))
except that errors in the expression are fatal and quoting special
characters is not needed in the latter case.
If exp's return value is used, something like
if exp EXPRESSION >/dev/null
can be replaced by
if [ $((EXPRESSION)) -ne 0 ]
with similar differences.
The exp-run showed that "let" is close enough to bash's and ksh's builtin
that removing it would break a few ports. Therefore, "let" remains in 9.x.
PR: bin/104432
Exp-run done by: pav (with some other sh(1) changes)
CDPATH should be ignored not only for pathnames starting with '/' but also
for pathnames whose first component is '.' or '..'.
The man page already describes this behaviour.
If IFS is null, unquoted $@/$* should still expand to separate words.
This differs from quoted $@ (which does not depend on IFS) in that pathname
generation is performed and empty words are removed.
If the length of a directory in PATH together with the given filename
exceeded FILENAME_MAX (which may happen even for pathnames that work), a
static buffer was overflown.
The static buffer is unnecessary, we can use the stalloc() stack.
Obtained from: NetBSD
MFC after: 1 week
This reflects failure to determine the pathname of the new directory in the
exit status (1). Normally, cd returns successfully if it did chdir() and the
call was successful.
In POSIX, -e only has meaning with -P; because our -L is not entirely
compliant and may fall back to -P mode, -e has some effect with -L as well.
This is sometimes used with eval or old-style command substitution, and most
shells other than ash derivatives allow it.
It can also be used with scripts that violate POSIX's requirement on the
application that they end in a newline (scripts must be text files except
that line length is unlimited).
Example:
v=`cat <<EOF
foo
EOF`
echo $v
This commit does not add support for the similar construct with new-style
command substitution, like
v=$(cat <<EOF
foo
EOF)
This continues to require a newline after the terminator.
Because we have no iconv in base, support for other charsets is not
possible.
Note that \u/\U are processed using the locale that was active when the
shell started. This is necessary to avoid behaviour that depends on the
parse/execute split (for example when placing braces around an entire
script). Therefore, UTF-8 encoding is implemented manually.
?, [...] patterns match codepoints instead of bytes. They do not match
invalid sequences. [...] patterns must not contain invalid sequences
otherwise they will not match anything. This is so that ${var#?} removes the
first codepoint, not the first byte, without putting UTF-8 knowledge into
the ${var#pattern} code. However, * continues to match any string and an
invalid sequence matches an identical invalid sequence. (This differs from
fnmatch(3).)
This ensures that mbrtowc(3) can be used directly once it has been verified
that there is no CTL* byte. Dealing with a CTLESC byte within a multibyte
character would be complicated.
The new values do occur in iso-8859-* encodings. This decreases efficiency
slightly but should not affect correctness.
Caveat: Updating across this change and rebuilding without cleaning may
yield a subtly broken sh binary. By default, make buildworld will clean and
avoid problems.
A string between $' and ' may contain backslash escape sequences similar to
the ones in a C string constant (except that a single-quote must be escaped
and a double-quote need not be). Details are in the sh(1) man page.
This construct is useful to include unprintable characters, tabs and
newlines in strings; while this can be done with a command substitution
containing a printf command, that needs ugly workarounds if the result is to
end with a newline as command substitution removes all trailing newlines.
The construct may also be useful in future to describe unprintable
characters without needing to write those characters themselves in 'set -x',
'export -p' and the like.
The implementation attempts to comply to the proposal for the next issue of
the POSIX specification. Because this construct is not in POSIX.1-2008,
using it in scripts intended to be portable is unwise.
Matching the minimal locale support in the rest of sh, the \u and \U
sequences are currently not useful.
Exp-run done by: pav (with some other sh(1) changes)
Note that this only applies to variables that are actually used.
Things like (0 && unsetvar) do not cause an error.
Exp-run done by: pav (with some other sh(1) changes)
In particular, this makes things like ${#foo[0]} and ${#foo[@]} errors
rather than silent equivalents of ${#foo}.
PR: bin/151720
Submitted by: Mark Johnston
Exp-run done by: pav (with some other sh(1) changes)
For backgrounded pipelines and subshells, the previous value of $? was being
preserved, which is incorrect.
For backgrounded simple commands containing a command substitution, the
status of the last command substitution was returned instead of 0.
If fork() fails, this is an error.
If the -p option is turned off, privileges from a setuid or setgid binary
are dropped. Make sure to check if this succeeds. If it fails, this is an
error which will cause the shell to abort except in interactive mode or if
'command' was used to make 'set' or an outer 'eval' or '.' non-special.
Note that taking advantage of this feature and writing setuid shell scripts
seems unwise.
MFC after: 1 week
If EV_EXIT causes an exit, use the exception mechanism to unwind
redirections and local variables. This way, if the final command is a
redirected command, an EXIT trap now executes without the redirections.
Because of these changes, EV_EXIT can now be inherited by the body of a
function, so do so. This means that a function no longer prevents a fork
before an exec being skipped, such as in
f() { head -1 /etc/passwd; }; echo $(f)
Wrapping a single builtin in a function may still cause an otherwise
unnecessary fork with command substitution, however.
An exit command or -e failure still invokes the EXIT trap with the
original redirections and local variables in place.
Note: this depends on SHELLPROC being gone. A SHELLPROC depended on
keeping the redirections and local variables and only cleaning up the
state to restore them.
This is only a problem if IFS contains digits, which is unusual but valid.
Because of an incorrect fix for PR bin/12137, "${#parameter}" was treated
as ${#parameter}. The underlying problem was that "${#parameter}"
erroneously added CTLESC bytes before determining the length. This
was properly fixed for PR bin/56147 but the incorrect fix was not backed
out.
Reported by: Seeker on forums.freebsd.org
MFC after: 2 weeks
POSIX does not require the shell to fork for a subshell environment, and we
use that possibility in various ways (command substitutions with a single
command and most subshells that are the final command of a shell process).
Therefore do not tie subshells to forking in the man page.
Command substitutions with expansions are a bit strange, causing a fork for
$(...$(($x))...) because $x might expand to y=2; they will probably be
changed later but this is how they work now.
These already worked: $# ${#} ${##} ${#-} ${#?}
These now work as well: ${#+word} ${#-word} ${##word} ${#%word}
There is an ambiguity in the standard with ${#?}: it could be the length of
$? or it could be $# giving an error in the (impossible) case that it is not
set. We continue to use the former interpretation as it seems more useful.
New features:
* proper lazy evaluation of || and &&
* ?: ternary operator
* executable is considerably smaller (8K on i386) because lex and yacc are
no longer used
Differences from dash:
* arith_t instead of intmax_t
* imaxdiv() not used
* unset or null variables default to 0
* let/exp builtin (undocumented, will probably be removed later)
Obtained from: dash
* In {(...) <redir1;} <redir2, do not drop redir1.
* Maintain the difference between (...) <redir and {(...)} <redir:
In (...) <redir, the redirection is performed in the child, while in
{(...)} <redir it should be performed in the parent (like {(...); :;}
<redir)
POSIX requires this and it is simpler than the previous code that remembered
command locations when appending directories to PATH.
In particular,
PATH=$PATH
is no longer a no-op but discards all cached command locations.
If execve() returns an [ENOEXEC] error, check if the file is binary before
trying to execute it using sh. A file is considered binary if at least one
of the first 256 bytes is '\0'.
In particular, trying to execute ELF binaries for the wrong architecture now
fails with an "Exec format error" message instead of syntax errors and
potentially strange results.
These are called "shell procedures" in the source.
If execve() failed with [ENOEXEC], the shell would reinitialize itself
and execute the program as a script. This requires a fair amount of code
which is not frequently used (most scripts have a #! magic number).
Therefore just execute a new instance of sh (_PATH_BSHELL) to run the
script.
This matches the constants from <signal.h> with 'SIG' removed, which POSIX
requires kill and trap to accept and 'kill -l' to write.
'kill -l', 'trap', 'trap -l' output is now upper case.
In Turkish locales, signal names with an upper case 'I' are now accepted,
while signal names with a lower case 'i' are no longer accepted, and the
output of 'killall -l' now contains proper capital 'I' without dot instead
of a dotted capital 'I'.
* There is no plan for an alternative to the command "set".
* Attempting to unset a readonly variable has not raised an error for quite
a while, so the order of unsetting a variable and a function with the same
name does not matter.
MFC after: 1 week
When a foreground job exits on a signal, a message is printed to stdout
about this. The buffer was not flushed after this which could result in the
message being written to the wrong file if the next command was a builtin
and had stdout redirected.
Example:
sh -c 'kill -9 $$'; : > foo; echo FOO:; cat foo
Reported by: gcooper
MFC after: 1 week
This is useful so that it is easier to exit on a signal than to reset the
trap to default and resend the signal. It matches ksh93. POSIX says that
'exit' without args from a trap action uses the exit status from the last
command before the trap, which is different from 'exit $?' and matches this
if the previous command is assumed to have exited on the signal.
If the signal is SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU, or if the default
action for the signal is to ignore it, a normal _exit(2) is done with exit
status 128+signal_number.
* Make 'trap --' do the same as 'trap' instead of nothing.
* Make '--' stop option processing (note that '-' action is not an option).
Side effect: The error message for an unknown option is different.
All builtins are now always found before a PATH search.
Most ash derivatives have an undocumented feature where the presence of an
entry "%builtin" in $PATH will cause builtins to be checked at that point of
the PATH search, rather than before looking at any directories as documented
in the man page (very old versions do document this feature).
I am removing this feature from sh, as it complicates the code, may violate
expectations (for example, /usr/bin/alias is very close to a forkbomb with
PATH=/usr/bin:%builtin, only /usr/bin/builtin not being another link saves
it) and appears to be unused (all the %builtin google code search finds is
in some sort of ash source code).
Note that aliases and functions took and take precedence above builtins.
Because aliases work on a lexical level they can only ever be overridden on
a lexical level (quoting or preceding 'builtin' or 'command'). Allowing
override of functions via PATH does not really fit in the model of sh and it
would work differently from %builtin if implemented.
Note: POSIX says special builtins are found before functions. We comply to
this because we do not allow functions with the same name as a special
builtin.
Silence from: freebsd-hackers@ (message sent 20101225)
Discussed with: dougb
It should use the original exit status, just like falling off the
end of the trap handler.
Outside an EXIT trap, 'exit' is still equivalent to 'exit $?'.
An error message is written, the builtin is not executed, nonzero exit
status is returned but the shell does not abort.
This was already checked for special builtins and external commands, with
the same consequences except that the shell aborts for special builtins.
Obtained from: NetBSD
Change the criterion for builtins to be safe to execute in the same process
in optimized command substitution from a blacklist of only cd, . and eval to
a whitelist.
This avoids clobbering the main shell environment such as by $(exit 4) and
$(set -x).
The builtins jobid, jobs, times and trap can still show information not
available in a child process; this is deliberately permitted. (Changing
traps is not.)
For some builtins, whether they are safe depends on the arguments passed to
them. Some of these are always considered unsafe to keep things simple; this
only harms efficiency a little in the rare case they are used alone in a
command substitution.
If SIGINT arrived at exactly the right moment (unlikely), an exception
handler in a no longer active stack frame would be called.
Because the old handler was not used in the normal path, clang thought it
was a dead value and if an exception happened it would longjmp() to garbage.
This caused builtins/fc1.0 to fail if histedit.c was compiled with clang.
MFC after: 1 week
Before considering to execute a command substitution in the same process,
check if any of the expansions may have a side effect; if so, execute it in
a new process just like happens if it is not a single simple command.
Although the check happens at run time, it is a static check that does not
depend on current state. It is triggered by:
- expanding $! (which may cause the job to be remembered)
- ${var=value} default value assignment
- assignment operators in arithmetic
- parameter substitutions in arithmetic except ${#param}, $$, $# and $?
- command substitutions in arithmetic
This means that $((v+1)) does not prevent optimized command substitution,
whereas $(($v+1)) does, because $v might expand to something containing
assignment operators.
Scripts should not depend on these exact details for correctness. It is also
imaginable to have the shell fork if and when a side effect is encountered
or to create a new temporary namespace for variables.
Due to the $! change, the construct $(jobs $!) no longer works. The value of
$! should be stored in a variable outside command substitution first.
Command substitutions consisting of a single simple command are executed in
the main shell process but this should be invisible apart from performance
and very few exceptions such as $(trap).
Maintain a pointer to the end of the stack string area instead of how much
space is left. This simplifies the macros in memalloc.h. The places where
the new variable must be updated are only where the memory area is created,
destroyed or resized.
This allows specifying a %job (which is equivalent to the corresponding
process group).
Additionally, it improves reliability of kill from sh in high-load
situations and ensures "kill" finds the correct utility regardless of PATH,
as required by POSIX (unless the undocumented %builtin mechanism is used).
Side effect: fatal errors (any error other than kill(2) failure) now return
exit status 2 instead of 1. (This is consistent with other sh builtins, but
not in NetBSD.)
Code size increases about 1K on i386.
Obtained from: NetBSD
The #define for warnx now behaves much like the libc function (except that
it uses sh command name and output).
Also, it now uses C99 __VA_ARGS__ so there is no need for three different
macros for 0, 1 or 2 parameters.
Constants in arithmetic starting with 0 should be octal only.
This avoids the following highly puzzling result:
$ echo $((018-017))
3
by making it an error instead.
c is assigned 0 and *loc is pointing to NULL, so c!=0 cannot be true,
and dereferencing loc would be a bad idea anyway.
Coverity Prevent: CID 5113
Reviewed by: jilles
The CTLESC byte to protect a special character was output before instead of
after a newline directly preceding the special character.
The special handling of newlines is because command substitutions discard
all trailing newlines.
* Prefer kill(-X) to killpg(X).
* Remove some dead code.
* No additional SIGINT is needed if int_pending() is already true.
No functional change is intended.
The herefd hack wrote out partial here documents while expanding them. It
seems unnecessary complication given that other expansions just allocate
memory. It causes bugs because the stack is also used for intermediate
results such as arithmetic expressions. Such places should disable herefd
for the duration but not all of them do, and I prefer removing the need for
disabling herefd to disabling it everywhere needed.
Here documents larger than 1024 bytes will use a bit more CPU time and
memory.
Additionally this allows a later change to expand here documents in the
current shell environment. (This is faster for small here documents but also
changes behaviour.)
Obtained from: dash
The code to translate the internal representation to text did not know about
various additions to the internal representation since the original ash and
therefore wrote binary stuff to the terminal.
The code is used in the jobs command and similar output.
Note that the output is far from complete and mostly serves for recognition
purposes.
If describing the status of a pipeline, write all elements of the pipeline
and show the status of the last process (which would also end up in $?).
Only write one report per job, not one for every process that exits.
To keep some earlier behaviour, if any process started by the shell in a
foreground job terminates because of a signal, write a message about the
signal (at most one message per job, however).
Also, do not write messages about signals in the wait builtin in
non-interactive shells. Only true foreground jobs now write such messages
(for example, "Terminated").
In r208489, I added code to reap zombies when forking new processes, to
limit the amount of zombies. However, this can lead to marking a job as done
or stopped if it consists of multiple processes and the first process ends
very quickly. Fix this by only checking for zombies before forking the first
process of a job and not marking any jobs without processes as done or
stopped.
The getpgid() call will fail if the first process in the job has already
terminated, resulting in output of "-1".
The pgid of a job is always the pid of the first process in the job and
other code already relies on this.
Make sure all built-in commands are in the subsection named such, except
exp, let and wordexp which are deliberately undocumented. The text said only
built-ins that really need to be a built-in were documented there but in
fact almost all of them were already documented.
* Prefer one CHECKSTRSPACE with multiple USTPUTC to multiple STPUTC.
* Add STPUTS macro (based on function) and use it instead of loops that add
nul-terminated strings to the stack string.
No functional change is intended, but code size is about 1K less on i386.
If getcwd fails, do not treat this as an error, but print a warning and
unset PWD. This is similar to the behaviour when starting the shell in a
directory whose name cannot be determined.
Since is_alpha/is_name/is_in_name were made ASCII-only, this can no longer
happen.
Additionally, the check was wrong because it did not include the new
CTLQUOTEEND.
This was removed in 2001 but I think it is appropriate to add it back:
* I do not want to encourage people to write fragile and non-portable echo
commands by making printf much slower than echo.
* Recent versions of Autoconf use it a lot.
* Almost no software still wants to support systems that do not have
printf(1) at all.
* In many other shells printf is already a builtin.
Side effect: printf is now always the builtin version (which behaves
identically to /usr/bin/printf) and cannot be overridden via PATH (except
via the undocumented %builtin mechanism).
Code size increases about 5K on i386. Embedded folks might want to replace
/usr/bin/printf with a hard link to /usr/bin/alias.
The information in sh(1) about the echo builtin is equivalent, though less
extensive.
The echo(1) man page (bin/echo/echo.1) is different.
Unfortunately, sh's echo builtin and /bin/echo have gone out of sync and
this probably cannot be fixed any more.
Reported by: uqs (list of untouched files)
MFC after: 1 week
In particular, remove the text about ksh-like features, which are usually
taken for granted nowadays. The original Bourne shell is fading away and for
most users our /bin/sh is one of the most minimalistic they know.
This moves the function of the noaliases variable into the checkkwd
variable. This way it is properly reset on errors and aliases can be used
normally in the commands for each case (the case labels recognize the
keyword esac but no aliases).
The new code is clearer as well.
Obtained from: dash
These do something else in ksh: name=(...) is an array or compound variable
assignment and the others are extended patterns.
This is the last patch of the ones tested in the exp run.
Exp-run done by: pav (with some other sh(1) changes)
Apart from detecting breakage earlier or at all, this also fixes a segfault
in the testsuite. The "handling" of the breakage left an invalid internal
representation in some cases.
Examples:
echo a; do echo b
echo `) echo a`
echo `date; do do do`
Exp-run done by: pav (with some other sh(1) changes)
subevalvar() incorrectly assumed that CTLESC bytes were present iff the
expansion was quoted. However, they are present iff various processing such
as word splitting is to be done later on.
Example:
v=@$e@$e@$e@
y="${v##*"$e"}"
echo "$y"
failed if $e contained the magic CTLESC byte.
Exp-run done by: pav (with some other sh(1) changes)
The code is inspired by NetBSD sh somewhat, but different because we
preserve the old Almquist/Bourne/Korn ability to have an unquoted part in a
quoted ${v+word}. For example, "${v-"*"}" expands to $v as a single field if
v is set, but generates filenames otherwise.
Note that this is the only place where we split text literally from the
script (the similar ${v=word} assigns to v and then expands $v). The parser
must now add additional markers to allow the expansion code to know whether
arbitrary characters in substitutions are quoted.
Example:
for i in ${$+a b c}; do echo $i; done
Exp-run done by: pav (with some other sh(1) changes)
If double-quote state does not match, treat the '}' literally.
This ensures double-quote state remains the same before and after a
${v+-=?...} which helps with expand.c.
It makes things like
${foo+"\${bar}"}
which I have seen in the wild work as expected.
Exp-run done by: pav (with some other sh(1) changes)
This is a syntax error.
POSIX does not say explicitly whether defining a function with the same name
as a special builtin is allowed, but it does say that it is impossible to
call such a function.
A special builtin can still be overridden with an alias.
This commit is part of a set of changes that will ensure that when
something looks like a special builtin to the parser, it is one. (Not the
other way around, as it remains possible to call a special builtin named
by a variable or other substitution.)
Exp-run done by: pav (with some other sh(1) changes)
Add some conservative checks on function names:
- Disallow expansions or quoting characters; these can only be called via
strange control characters
- Disallow '/'; these functions cannot be called anyway, as exec.c assumes
they are pathnames
- Make the CTL* bytes work properly in function names.
These are syntax errors.
POSIX does not require us to support more than names (letters, digits and
underscores, not starting with a digit), but I do not want to restrict it
that much at this time.
Exp-run done by: pav (with some other sh(1) changes)
This is how ksh93 treats ! within a pipeline and makes the ! in
a | ! b | c
negate the exit status of the pipeline, as if it were
a | { ! b | c; }
Side effect: something like
f() ! a
is now a syntax error, because a function definition takes a command,
not a pipeline.
Exp-run done by: pav (with some other sh(1) changes)
For multi-command pipelines,
1. all commands are direct children of the shell (unlike the original
Bourne shell)
2. all commands are executed in a subshell (unlike the real Korn shell)
MFC after: 1 week
immediately written into the stack after the call. Instead let the caller
manage the "space left".
Previously, growstackstr()'s assumption causes problems with STACKSTRNUL()
where we want to be able to turn a stack into a C string, and later
pretend the NUL is not there.
This fixes a bug in STACKSTRNUL() (that grew the stack) where:
1. STADJUST() called after a STACKSTRNUL() results in an improper adjust.
This can be seen in ${var%pattern} and ${var%%pattern} evaluation.
2. Memory leak in STPUTC() called after a STACKSTRNUL().
Reviewed by: jilles
- Use %t to print ptrdiff_t values.
- Cast a ptrdiff_t value explicitly to int for a field width specifier.
While here, sort includes.
Submitted by: Garrett Cooper
frobbing CFLAGS directly. DEBUG_FLAGS is something that can be specified
on the make command line without having to edit the Makefile directly.
Submitted by: Garrett Cooper
expr(1) should usually not be used as various forms of parameter expansion
and arithmetic expansion replicate most of its functionality in an easier
way.
getopt(1) should not be used at all in new code. Instead, getopts(1) or
entirely manual parsing should be used.
MFC after: 1 week
This makes it impossible to use locale-specific characters in variable
names.
Names containing locale-specific characters make scripts only work with the
correct locale setting. Also, they did not even work in many practical cases
because multibyte character sets such as utf-8 are not supported.
This also avoids weirdness if LC_CTYPE is changed in the middle of a script.
This Almquist extension was disabled long ago.
In pathname generation, components starting with '!!' were treated as
containing wildcards, causing unnecessary readdir (which could fail, causing
pathname generation to fail while it should not).
In our implementation and most others, a break or continue in a dot script
can break or continue a loop outside the dot script. This should cause all
further commands in the dot script to be skipped. However, cmdloop() did not
know about this and continued to parse and execute commands from the dot
script.
As described in the man page, a return in a dot script in a function returns
from the function, not only from the dot script. There was a similar issue
as with break and continue. In various other shells, the return appears to
return from the dot script, but POSIX seems not very clear about this.
The buffer for generated pathnames could be too small in some cases. It
happened to be always at least PATH_MAX long, so there was never an overflow
if the resulting pathnames would be usable.
This bug may be abused if a script subjects input from an untrusted source
to pathname generation, which a bad idea anyhow. Most shell scripts do not
work on untrusted data. secteam@ says no advisory is necessary.
PR: bin/148733
Reported by: Changming Sun snnn119 at gmail com
MFC after: 10 days
This makes a difference if there is a command substitution.
To make this work, evalstring() has been changed to set exitstatus to 0 if
no command was executed (the string contained only whitespace).
Example:
eval $(false); echo $?
should print 0.
This simply sets a flag in libedit. It has a shortcoming in that it does not
apply to multi-line commands.
Note that a configuration option for this is not going to happen, but always
having this seems better than not having it. NetBSD has done the same.
PR: bin/54683
Obtained from: NetBSD
MFC after: 1 month
If an ; or & token was followed by an EOF token, pending here-documents were
left uninitialized. Execution would crash, either in the main shell process
for literal here-documents or in a child process for expanded
here-documents. In the latter case the problem is hard to detect apart from
the core dumps and log messages.
Side effect: slightly different retries on inputs where EOF is not
persistent.
Note that tools/regression/bin/sh/parser/heredoc6.0 still causes a similar
crash in a child process. The text passed to eval is malformed and should be
rejected.
