as a fairly faithful implementation of the algorithm found in
PTP Tang, "Table-driven implementation of the Expm1 function
in IEEE floating-point arithmetic," ACM Trans. Math. Soft., 18,
211-222 (1992).
Over the last 18-24 months, the code has under gone significant
optimization and testing.
Reviewed by: bde
Obtained from: bde (most of the optimizations)
* Grab the reset lock first, so any subsequent interrupt, TX, RX work
will fail
* Then shut down interrupts
* Then wait for TX/RX to finish running
At this point no further work will be running, so it's safe to do the
reset path code.
PR: kern/179232
The main problem here is that fast and driver RX diversity isn't actually
configured; I need to figure out why that is. That said, this makes
the single-antenna connected AR9285 and AR2427 (AR9285 w/ no 11n) work
correctly.
PR: kern/179269
* Use integral numerical constants, and let the compiler do the
conversion to long double.
ld128/s_expl.c:
* Use integral numerical constants, and let the compiler do the
conversion to long double.
* Use the ENTERI/RETURNI macros, which are no-ops on ld128. This
however makes the ld80 and ld128 identical.
Reviewed by: bde (as part of larger diff)
Uncover some, previously reserved, fields that are used by Ext4.
These are currently unused but it is good to have them for future
reference.
Reviewed by: bde
MFC after: 3 days
* In the special case x = -Inf or -NaN, use a micro-optimization
to eliminate the need to access u.xbits.man.
* Fix an off-by-one for small arguments |x| < 0x1p-65.
ld128/s_expl.c:
* In the special case x = -Inf or -NaN, use a micro-optimization
to eliminate the need to access u.xbits.manh and u.xbits.manl.
* Fix an off-by-one for small arguments |x| < 0x1p-114.
Obtained from: bde
* Update the evaluation of the polynomial. This allows the removal
of the now unused variables t23 and t45.
ld128/s_expl.c:
* Update the evaluation of the polynomial and the intermediate
result t. This update allows several numerical constants to be
written as double rather than long double constants. Update
the constants as appropriate.
Obtained from: bde
and use macros to access the e component of the unions. This allows
the portions of the code in ld80 to be identical to the ld128 code.
Obtained from: bde
of a lock within a single thread.
- Fix handling of interlocks in WITNESS by properly requiring the interlock
to be held exactly once if it is specified.
the vnode lock while iterating over the free vnode list. Instead of
yielding, pause for 1 tick. The change is reported to help in some
virtualized environments.
Submitted by: Roger Pau Monn? <roger.pau@citrix.com>
Discussed with: jilles
Tested by: pho
MFC after: 2 weeks
The names now coincide with the name used in PTP Tang's paper.
* Rename the variable from s to tbl to better reflect that
this is a table, and to be consistent with the naming scheme
in s_exp2l.c
Reviewed by: bde (as part of larger diff)
* Update Copyright years to include 2013.
ld128/s_expl.c:
* Correct and update Copyright years. This code originated from
the ld80 version, so it should reflect the same time period.
Reviewed by: bde (as part of larger diff)
I initially thought wchar_t was locale independent, but this seems to be
only the case on Linux. This means that we cannot depend on the *wc*()
routines to implement *c16*() and *c32*(). Instead, use the Citrus
libiconv that is part of libc.
I'll see if there is anything I can do to make the existing functions
somewhat useful in case the system is built without libiconv in the
nearby future. If not, I'll simply remove the broken implementations.
Reviewed by: jilles, gabor
Xen host side can handle after defragmentation.
This prevents the driver from throwing away too long TSO chains and
improves the performance on Amazon AWS instances with 10GigE virtual
interfaces to the normally expected throughput.
Submitted by: cperciva (earlier version)
Reviewed by: cperciva
Tested by: cperciva
MFC after: 1 week
limited in the amount of data they can handle at once.
Drivers can set ifp->if_hw_tsomax before calling ether_ifattach() to
change the limit.
The lowest allowable size is IP_MAXPACKET / 8 (8192 bytes) as anything
less wouldn't be very useful anymore. The upper limit is still at
IP_MAXPACKET (65536 bytes). Raising it requires further auditing of
the IPv4/v6 code path's as the length field in the IP header would
overflow leading to confusion in firewalls and others packet handler on
the real size of the packet.
The placement into "struct ifnet" is a bit hackish but the best place
that was found. When the stack/driver boundary is updated it should
be handled in a better way.
Submitted by: cperciva (earlier version)
Reviewed by: cperciva
Tested by: cperciva
MFC after: 1 week (using spare struct members to preserve ABI)
cacos, cacosf, cacosh, cacoshf,
casin, casinf, casinh, casinhf,
catan, catanf, catanh, catanhf,
logl, log2l, log10l, log1pl
I am hoping kargl@ will commit expl and expm1l soon, in which case this
bump will cover those, too.
Requested by: danfe
long double versions don't pass yet. (They are rather nit-picky cases,
so there's ongoing discussion with Bruce about whether it is worth the
performance cost.)
space, fork(2) would cause shadowing of the physical object and
copying of the shared page into private copy, effectively preventing
updates for the exported timehands structure and stopping the clock.
Specify the maximum allowed permissions for the page to be read and
execute, preventing write from the user mode.
Reported and tested by: <huanghwh@yahoo.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
identified, unify the code of check_deferred_signal() for all
architectures, making the variant under #ifdef x86 common.
Tested by: marius (sparc64)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
used as the estimation of size, to 32GB. This provides around 100K of
buffer headers and corresponding KVA for buffer map at the peak.
Sizing the cache larger is not useful, also resulting in the wasting
and exhausting of KVA for large machines.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
clearing the page's PGA_REFERENCED flag. Since we are typically
manipulating the page's act_count field when we are clearing its
PGA_REFERENCED flag, the page lock is already held everywhere that we clear
the PGA_REFERENCED flag. So, in fact, this revision only changes some
comments and an assertion. Nonetheless, it will enable later changes to
object locking in the pageout code.
Introduce vm_page_assert_locked(), which completely hides the implementation
details of the page lock from the caller, and use it in
vm_page_aflag_clear(). (The existing vm_page_lock_assert() could not be
used in vm_page_aflag_clear().) Over the coming weeks, I expect that we'll
either eliminate or replace the various uses of vm_page_lock_assert() with
vm_page_assert_locked().
Reviewed by: attilio
Sponsored by: EMC / Isilon Storage Division
display a global instead of the passed-argument; however since the global
always has the same value as the passed argument, it made no difference in
the realtime operation.
caused by the standard (and correct) behavior of the shell to discard the
return status of lvalue-operands in a pipe-chain.
The solution is to not pipe the file-acquisition directly into sort(1) but
instead store the output (allowing immediate testing of the return status)
and later sort it.
edge-case. The case was that you have been through the FTP setup once before
and on the second time through, you cancel at the re-selection of a new FTP
server.
The spurious warning was "device_media: not found" and was caused because
the underlying call to f_device_network_down() did not check to see if the
network device existed before attempting to shut it down.
Add checks to make sure we don't forge ahead unless the device exists.
make their purpose more clear by their names:
f_dialog_input_change() and
f_dialog_input_expire()
Are now (respectively):
f_dialog_input_expire_password() and
f_dialog_input_expire_account()
Upon revisit to this portion of code, the former names were too confusing.
