Some early PCIe chipsets are explicitly listed in the white-list to
enable use of the MMIO config space accesses, perhaps because ACPI
tables were not reliable source of the base MCFG address at that time.
For that chipsets, MCFG base was read from the known chipset MCFGbase
config register.
During very early stage of boot, when access to the PCI config space
is performed (see e.g. pci_early_quirks.c), we cannot map 255MB of
registers because the method used with pre-boot pmap overflows initial
kernel page tables.
Move fallback to read MCFGbase to the attachment method of the
x86/legacy device, which removes code duplication, and results in the
use of io accesses until MCFG is parsed or legacy attach called.
For amd64, pre-initialize cfgmech with CFGMECH_1, right now we
dynamically assign CFGMECH_1 to it anyway, and remove checks for
CFGMECH_NONE.
There is a mention in the Intel documentation for corresponding
chipsets that OS must use either io port or MMIO access method, but we
already break this rule by reading MCFGbase register, so one more
access seems to be innocent.
Reported by: longwitz@incore.de
PR: 236838
Reviewed by: avg (other version), jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19833
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
FreeBSD base system does not provide an ACPI handler for the PC/AT RTC/CMOS
device with PnP ID PNP0B00; on some HP laptops, the absence of this handler
causes suspend/resume and poweroff(8) to hang or fail [1], [2]. On these
laptops EC _REG method queries the RTC date/time registers via ACPI
before suspending/powering off. The handler should be registered before
acpi_ec driver is loaded.
This change adds handler to access CMOS RTC operation region described in
section 9.15 of ACPI-6.2 specification [3]. It is installed only for ACPI
version of atrtc(4) so it should not affect old ACPI-less i386 systems.
It is possible to disable the handler with loader tunable:
debug.acpi.disabled=atrtc
Informational debugging printf can be enabled by setting hw.acpi.verbose=1
in loader.conf
[1] https://wiki.freebsd.org/Laptops/HP_Envy_6Z-1100
[2] https://wiki.freebsd.org/Laptops/HP_Notebook_15-af104ur
[3] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf
PR: 207419, 213039
Submitted by: Anthony Jenkins <Scoobi_doo@yahoo.com>
Reviewed by: ian
Discussed on: acpi@, 2013-2015, several threads
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19314
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
idle_td is dereferenced without thread-locking it to make its contents is
invariant, and was accessed without telling the compiler that its contents
is invariant. Some compilers optimized accesses to the supposedly invariant
contents by moving the critical checks for changes outside of the loop that
waits for changes. Fix this using atomic ops.
This bug only showed up for the following configuration: a Turion2
system, amd64 kernels, compiled by gcc, and SCHED_4BSD. clang fails
to do the optimization with all CFLAGS that I tried, because it doesn't
fully optimize the '__asm __volatile' for cpu_spinwait() although this
asm has no memory clobber. gcc only does the optimization with most
CFLAGS. I mostly used -Os with all compilers. i386 works because gcc
-m32 -Os only moves 1 or the 2 accesses outside of the loop.
Non-Turion2 systems and SCHED_ULE worked due to different timing (when
all APs start before the BP checks them outside of the loop).
Reviewed by: kib
Make it more comprehensive on i386, by not setting nx bit for any
mapping, not just adding PF_X to all kernel-loaded ELF segments. This
is needed for the compatibility with older i386 programs that assume
that read access implies exec, e.g. old X servers with hand-rolled
module loader.
Reported and tested by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It was broken before PAE/no-PAE merge, but since now PAE is the
default, resume is apparently becomes for all machines.
The corrected issues:
- the trampoline page is not mapped executable, so machine faults when
paging is on;
- MSR.EFER and %cr4 both should be loaded before paging is enabled,
otherwise paging structures are invalid (cr4.PAE and EFER.NX).
- MSR.EFER and %cr4 should be only loaded if present. I attempt to handle
this by not touching the registers if the value is zero.
There are some more bits still not quite correct, e.g. unconditional
access to %cr4 in resumectx.
Reported and debugging help by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
CPU and buses can manage up to the limit reported by cpu_maxphyaddr,
so set mem_rman to the value returned by cpu_getmaxphyaddr(). For the
PAE mode, it was missed both when rman_res_t was increased to
uintmax_t, and from the PAE merge commit.
When importing smaps or dump_avail chunks into memory rman, do not
blindly ignore resources which ends above the limit, chomp them
instead if start is below the limit. The same change was already done
to i386 add_physmap_entry().
Based on the submission by: bde
MFC after: 2 months
The main differences with the currently implemented method are:
- Requires a local APIC EOI, since it doesn't bypass the local APIC
as the previous method used to do.
- Can be set to use different IDT vectors on each vCPU. Note that
FreeBSD doesn't make use of this feature since the event channel
IDT vector is reserved system wide.
Note that the old method of setting the event channel upcall is
not removed, and will be used as a fallback if this newly introduced
method is not available.
MFC after: 1 month
Sponsored by: Citrix Systems R&D
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.
Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.
Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.
i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.
The PAE_TABLES kernel config option is retired.
In collaboarion with: pho
Discussed with: emaste
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18894
If i386 has more than 4G of memory, allow the same number of busdma
bounce pages as for amd64. In fact, in this case bouncing sometimes
is much heavier than on amd64.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18854
Right now bus_addr_t and vm_paddr_t are always aliased to the same
underlying integer type on x86, which makes the interchange hard to
detect. Shortly, i386 kernel would use uint64_t for vm_paddr_t to
enable automatic use of PAE paging structures if hardware allows it,
while bus_addr_t would be extended to 64bit only when PAE option is
specified.
Fix all places that were identified as using bus_addr_t while page
address was assumed. This was performed by testing the complete PAE
merging patch on machine with > 4G of RAM enabled.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18854
vmm's CPUID emulation presented Intel topology information to the guest, but
disabled AMD topology information and in some cases passed through garbage.
I.e., CPUID leaves 0x8000_001[de] were passed through to the guest, but
guest CPUs can migrate between host threads, so the information presented
was not consistent. This could easily be observed with 'cpucontrol -i 0xfoo
/dev/cpuctl0'.
Slightly improve this situation by enabling the AMD topology feature flag
and presenting at least the CPUID fields used by FreeBSD itself to probe
topology on more modern AMD64 hardware (Family 15h+). Older stuff is
probably less interesting. I have not been able to empirically confirm it
is sufficient, but it should not regress anything either.
Reviewed by: araujo (previous version)
Relnotes: sure
With new sysctls (to the best of our ability do detect them). Restructured
smp.4 slightly for clarity (keep relevant stuff closer to the top) while
documenting.
Reviewed by: markj, jhibbits (ppc parts)
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18322
The goal of this change is to fix a problem with PCI shared interrupts
during suspend and resume.
I have observed a couple of variations of the following scenario.
Devices A and B are on the same PCI bus and share the same interrupt.
Device A's driver is suspended first and the device is powered down.
Device B generates an interrupt. Interrupt handlers of both drivers are
called. Device A's interrupt handler accesses registers of the powered
down device and gets back bogus values (I assume all 0xff). That data is
interpreted as interrupt status bits, etc. So, the interrupt handler
gets confused and may produce some noise or enter an infinite loop, etc.
This change affects only PCI devices. The pci(4) bus driver marks a
child's interrupt handler as suspended after the child's suspend method
is called and before the device is powered down. This is done only for
traditional PCI interrupts, because only they can be shared.
At the moment the change is only for x86.
Notable changes in core subsystems / interfaces:
- BUS_SUSPEND_INTR and BUS_RESUME_INTR methods are added to bus
interface along with convenience functions bus_suspend_intr and
bus_resume_intr;
- rman_set_irq_cookie and rman_get_irq_cookie functions are added to
provide a way to associate an interrupt resource with an interrupt
cookie;
- intr_event_suspend_handler and intr_event_resume_handler functions
are added to the MI interrupt handler interface.
I added two new interrupt handler flags, IH_SUSP and IH_CHANGED, to
implement the new intr_event functions. IH_SUSP marks a suspended
interrupt handler. IH_CHANGED is used to implement a barrier that
ensures that a change to the interrupt handler's state is visible
to future interrupts.
While there, I fixed some whitespace issues in comments and changed a
couple of logically boolean variables to be bool.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15755
The error was caused by map_ucode() casting a vm_paddr_t to a void *.
Use a uintptr_t instead to match the caller. Fix some style bugs while
here.
Reported by: bde
Reviewed by: bde
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Bootstacks are unused after APs executed sched_throw() in
init_secondary_tail() and started executing on proper idle thread
stack. Add sysinit that detects that the idle thread for each CPU was
scheduled at least once, and free corresponding bootstack.
Slight addition of the code (~200 bytes) is compensated by the saving,
because even on typical small modern desktop CPU we leak 128K of
memory otherwise (4 pages x 8 threads).
Reviewed by: jhb
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18486
This moves the architecture independent parts of sys/x86/acpica/srat.c
to sys/dev/acpica/acpi_pxm.c, to be used later on arm64. The function
declarations are moved to sys/dev/acpica/acpivar.h
We also need to update sys/conf/files.{i386,amd64} to use the new file.
No functional changes.
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D17941
The SLIT and SRAT ACPI tables needs to be parsed on arm64 as well, on
systems that use UEFI/ACPI firmware and support NUMA. To do this, we
need to move most of the logic of x86/acpica/srat.c to dev/acpica and
provide an API that architectures can use to parse and configure ACPI
NUMA information.
This commit adds the API in srat.c as a first step, without making any
functional changes. We will move the common code to sys/dev/acpica
as the next step.
The functions added are:
* int acpi_pxm_init(int ncpus, vm_paddr_t maxphys) - to allocate and
initialize data structures used
* void acpi_pxm_parse_tables(void) - parse SRAT/SLIT, save the cpu and
memory proximity information
* void acpi_pxm_set_mem_locality(void) - use the saved data to set
memory locality
* void acpi_pxm_set_cpu_locality(void) - use the saved data to set cpu
locality
* void acpi_pxm_free(void) - free data structures allocated by init
On arm64, we do not have an cpu APIC id that can be used as index to
store CPU data, we need to use the Processor Uid. To help with this,
define internal functions cpu_add, cpu_find, cpu_get_info to store
and get CPU proximity information.
Reviewed by: markj, jhb (previous version)
Differential Revision: https://reviews.freebsd.org/D17940
These definitions will be used by a driver to implement Hardware
P-States (autonomous control of HWP, via Intel Speed Shift technology).
Reviewed by: kib
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D18050
Just allow MSI interrupts to always start at the end of the I/O APIC
pins. Since existing machines already have more than 255 I/O APIC
pins, IRQ 255 is no longer reliably invalid, so just remove the
minimum starting value for MSI.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D17991
SDM rev. 068 was released yesterday and it contains the description of
the MSR 0x10a IA32_ARCH_CAP. This change adds symbolic definitions for
all bits present in the document, and decode them in the CPU
identification lines printed on boot.
But also, the document defines SSB_NO as bit 4, while FreeBSD used but
2 to detect the need to work-around Speculative Store Bypass
issue. Change code to use the bit from SDM.
Similarly, the document describes bit 3 as an indicator that L1TF
issue is not present, in particular, no L1D flush is needed on
VMENTRY. We used RDCL_NO to avoid flushing, and again I changed the
code to follow new spec from SDM.
In fact my Apollo Lake machine with latest ucode shows this:
IA32_ARCH_CAPS=0x19<RDCL_NO,SKIP_L1DFL_VME,SSB_NO>
Reviewed by: bwidawsk
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D18006
The number of MSI IRQs still defaults to 512, but it can now be
changed at boot time via the machdep.num_msi_irqs tunable.
Reviewed by: kib, royger (older version)
Reviewed by: markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17977
The off-by-one errors in 332735 weren't actual errors and were
preventing the last MSI interrupt source from being used. Instead,
the issue is that when all MSI interrupt sources were allocated, the
loop in msix_alloc() would terminate with 'msi' still set to non-null.
The only check for 'i' overflowing was in the 'msi' == NULL case, so
msix_alloc() would try to reuse the last MSI interrupt source instead
of failing.
Fix by moving the check for all sources being in use to just after the
loop.
Reviewed by: kib, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17976
We need to know actual value for the standard extended features before
ifuncs are resolved.
Reported and tested by: madpilot
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Avoid using DELAY() since it can try to use spin locks on CPUs without
a P-state invariant TSC. For cpu_lock_delay(), always use the TSC if
it exists (even if it is not P-state invariant) to delay for a
microsecond. If the TSC does not exist, read from I/O port 0x84 to
delay instead.
PR: 228768
Reported by: Roger Hammerstein <cheeky.m@live.com>
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17851
This uses slightly simpler logic than the existing code by using the
full 64-bit counter and thus not having to worry about counter
overflow.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17850
On some Intel devices BIOS does not properly reserve memory (called
"stolen memory") for the GPU. If the stolen memory is claimed by the
OS, functions that depend on stolen memory (like frame buffer
compression) can't be used.
A function called pci_early_quirks that is called before the virtual
memory system is started was added. In Linux, this PCI early quirks
function iterates through all PCI slots to check for any device that
require quirks. While this more generic solution is preferable I only
ported the Intel graphics specific parts because I think my
implementation would be too similar to Linux GPL'd solution after
looking at the Linux code too much.
The code regarding Intel graphics stolen memory was ported from
Linux. In the case of Intel graphics stolen memory this
pci_early_quirks will read the stolen memory base and size from north
bridge registers. The values are stored in global variables that is
later read by linuxkpi_gplv2. Linuxkpi stores these values in a
Linux-specific structure that is read by the drm driver.
Relevant linuxkpi code is here:
https://github.com/FreeBSDDesktop/kms-drm/blob/drm-v4.16/linuxkpi/gplv2/src/linux_compat.c#L37
For now, only amd64 arch is suppor ted since that is the only arch
supported by the new drm drivers. I was told that Intel GPUs are
always located on 0:2:0 so these values are hard coded for now.
Note that the structure and early execution of the detection code is
not required in its current form, but we expect that the code will be
added shortly which fixes the potential BIOS bugs by reserving the
stolen range in phys_avail[]. This must be done as early as possible
to avoid conflicts with the potential usage of the memory in kernel.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Reviewed by: bwidawsk, imp
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16719
Differential revision: https://reviews.freebsd.org/D17775
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
All platforms except powerpc use the same values and powerpc shares a
majority of them.
Go ahead and declare AT_NOTELF, AT_UID, and AT_EUID in favor of the
unused AT_DCACHEBSIZE, AT_ICACHEBSIZE, and AT_UCACHEBSIZE for powerpc.
Reviewed by: jhb, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17397
This provides a chicken switch for anyone negatively impacted by
enabling NUMA in the amd64 GENERIC kernel configuration. With
NUMA disabled at boot-time, information about the NUMA topology
is not exposed to the rest of the kernel, and all of physical
memory is viewed as coming from a single domain.
This method still has some performance overhead relative to disabling
NUMA support at compile time.
PR: 231460
Reviewed by: alc, gallatin, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17439
Pre-defined policies are useful when integrating the domainset(9)
policy machinery into various kernel memory allocators.
The refactoring will make it easier to add NUMA support for other
architectures.
No functional change intended.
Reviewed by: alc, gallatin, jeff, kib
Tested by: pho (part of a larger patch)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17416
The change is a no-op for architectures which don't ifunc memset,
memcpy nor memmove.
Convert places which need them. Xen bits by royger.
Reviewed by: kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17487
This caused microcode to be updated only on the BSP if hyperthreading
was disabled, typically resulting in a hang or reset.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
The AMD Threadripper 2990WX is basically a slightly crippled Epyc.
Rather than having 4 memory controllers, one per NUMA domain, it has
only 2 memory controllers enabled. This means that only 2 of the
4 NUMA domains can be populated with physical memory, and the
others are empty.
Add support to FreeBSD for empty NUMA domains by:
- creating empty memory domains when parsing the SRAT table,
rather than failing to parse the table
- not running the pageout deamon threads in empty domains
- adding defensive code to UMA to avoid allocating from empty domains
- adding defensive code to cpuset to avoid binding to an empty domain
Thanks to Jeff for suggesting this strategy.
Reviewed by: alc, markj
Approved by: re (gjb@)
Differential Revision: https://reviews.freebsd.org/D1683
Use these predicates instead of inline references to vm_min_domains.
Also add a global all_domains set, akin to all_cpus.
Reviewed by: alc, jeff, kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17278
