loader.efi still needs work, but boot1.efi now builds.
Differential Revision: https://reviews.freebsd.org/D2244
Reviewed by: rpaulo
Sponsored by: The FreeBSD Foundation
Much of this file is common to the architectures we support, so share
an implementation by adding a little #ifdef-ery.
Differential Revision: https://reviews.freebsd.org/D2241
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
It's necessary to reset the screen to make sure any vendor pixels are
gone when we start boot1. In the Lenovo X1 (3rd gen), this is the
only way to clear the screen. Previously, the Lenovo logo would only
disappear after the kernel started scrolling the display.
After resetting the screen, EFI could put us in the worst LCD mode
(oversized characters), so we now find the largest mode we can use and
hope it's the most appropriate one (it's not trivial to tell what's
the correct LCD resolution at this point). It's worth noting that the
final stage loader has a 'mode' command that can be used to switch
text modes.
While there, enable the software cursor, just like in the legacy boot
mode.
MFC after: 1 week
This was not (and still is not) connected to the build, but the EFI
loader is in the process of being built for other than amd64 so these
files ought to live in their eventual MD location.
support for booting arm and arm64 from UEFI.
Differential Revision: https://reviews.freebsd.org/D2164
Reviewed by: emaste, imp (previous version)
Sponsored by: The FreeBSD Foundation
- Add bzipfs to the list of supported filesystems in the EFI loader.
- Increase the heap size allocated for the EFI loader from 2MB to 3MB.
Differential Revision: https://reviews.freebsd.org/D2053
Reviewed by: benno, emaste, imp
MFC after: 2 weeks
Sponsored by: Cisco Systems, Inc.
redzone below the stack pointer for scratch space and requires
interrupt and signal frames to avoid overwriting it. However, EFI uses
the Windows ABI which does not support this. As a result, interrupt
handlers in EFI push their interrupt frames directly on top of the
stack pointer. If the compiler used the red zone in a function in the
EFI loader, then a device interrupt that occurred while that function
was running could trash its local variables. In practice this happens
fairly reliable when using gzipfs as an interrupt during decompression
can trash the local variables in the inflate_table() function
resulting in corrupted output or hangs.
Fix this by disabling the redzone for amd64 EFI binaries. This
requires building not only the loader but any libraries used by the
loader without redzone support.
Thanks to Jilles for pointing me at the redzone once I found the stack
corruption.
Differential Revision: https://reviews.freebsd.org/D2054
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Cisco Systems, Inc.
first, EFI will use its definitions for {,U}INT{8,16,32,64} and
BOOLEAN. When EFI is included first, define ACPI_USE_SYSTEM_INTTYPES
to tell ACPI that these are already defined.
Differential Revision: https://reviews.freebsd.org/D1905
In UEFI it appears all available NICS are present to pass network traffic.
This gives the capability to load the loader.efi from disk then set
currdev="net3:" and then all I/O will over over the 2nd NIC. On this
machine is appears the first handle is the first NIC in IPv4 mode and
then the 2nd handle is the first NIC in IPv6 mode. The 3rd handle is
the 2nd NIC in IPv4 mode. The fix is to index into the handle based
on the unit cached from boot device passed into the loader.
Some testing info from a test boot via kenv:
currdev="net3:"
loaddev="net3:"
boot.netif.name="igb1"
__attribute__((format(...))), and the -fformat-extensions flag was
removed, introduce a new macro in bsd.sys.mk to choose the right variant
of compile flag for the used compiler, and use it.
Also add something similar to kern.mk, since including bsd.sys.mk from
that file will anger Warner. :-)
Note that bsd.sys.mk does not support the MK_FORMAT_EXTENSIONS knob used
in kern.mk, since that knob is only available in kern.opts.mk, not in
src.opts.mk. We might want to add it later, to more easily support
external compilers for building world (in particular, sys/boot).
to the loader in a similar way to the ACPI tables.
This will be used on arm64 but is not specific to the architecture.
Sponsored by: The FreeBSD Foundation
The loader previously failed to display on MacBooks and other systems
where the UEFI firmware remained in graphics mode.
Submitted by: Rafael Espíndola
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
This is largely the work from the projects/uefi branch, with some
additional refinements. This is derived from (and replaces) the
original i386 efi implementation; i386 support will be restored later.
Specific revisions of note from projects/uefi:
r247380:
Adjust our load device when we boot from CD under UEFI.
The process for booting from a CD under UEFI involves adding a FAT
filesystem containing your loader code as an El Torito boot image.
When UEFI detects this, it provides a block IO instance that points at
the FAT filesystem as a child of the device that represents the CD
itself. The problem being that the CD device is flagged as a "raw
device" while the boot image is flagged as a "logical partition". The
existing EFI partition code only looks for logical partitions and so
the CD filesystem was rendered invisible.
To fix this, check the type of each block IO device. If it's found to
be a CD, and thus an El Torito boot image, look up its parent device
and add that instead so that the loader will then load the kernel from
the CD filesystem. This is done by using the handle for the boot
filesystem as an alias.
Something similar to this will be required for booting from other
media as well as the loader will live in the EFI system partition, not
on the partition containing the kernel.
r246231:
Add necessary code to hand off from loader to an amd64 kernel.
r246335:
Grab the EFI memory map and store it as module metadata on the kernel.
This is the same approach used to provide the BIOS SMAP to the kernel.
r246336:
Pass the ACPI table metadata via hints so the kernel ACPI code can
find them.
r246608:
Rework copy routines to ensure we always use memory allocated via EFI.
The previous code assumed it could copy wherever it liked. This is not
the case. The approach taken by this code is pretty ham-fisted in that
it simply allocates a large (32MB) buffer area and stages into that,
then copies the whole area into place when it's time to execute. A more
elegant solution could be used but this works for now.
r247214:
Fix a number of problems preventing proper handover to the kernel.
There were two issues at play here. Firstly, there was nothing
preventing UEFI from placing the loader code above 1GB in RAM. This
meant that when we switched in the page tables the kernel expects to
be running on, we are suddenly unmapped and things no longer work. We
solve this by making our trampoline code not dependent on being at any
given position and simply copying it to a "safe" location before
calling it.
Secondly, UEFI could allocate our stack wherever it wants. As it
happened on my PC, that was right where I was copying the kernel to.
This did not cause happiness. The solution to this was to also switch
to a temporary stack in a safe location before performing the final
copy of the loaded kernel.
r246231:
Add necessary code to hand off from loader to an amd64 kernel.
r246335:
Grab the EFI memory map and store it as module metadata on the kernel.
This is the same approach used to provide the BIOS SMAP to the kernel.
r246336:
Pass the ACPI table metadata via hints so the kernel ACPI code can
find them.
r246608:
Rework copy routines to ensure we always use memory allocated via EFI.
The previous code assumed it could copy wherever it liked. This is not
the case. The approach taken by this code is pretty ham-fisted in that
it simply allocates a large (32MB) buffer area and stages into that,
then copies the whole area into place when it's time to execute. A more
elegant solution could be used but this works for now.
r247214:
Fix a number of problems preventing proper handover to the kernel.
There were two issues at play here. Firstly, there was nothing
preventing UEFI from placing the loader code above 1GB in RAM. This
meant that when we switched in the page tables the kernel expects to
be running on, we are suddenly unmapped and things no longer work. We
solve this by making our trampoline code not dependent on being at any
given position and simply copying it to a "safe" location before
calling it.
Secondly, UEFI could allocate our stack wherever it wants. As it
happened on my PC, that was right where I was copying the kernel to.
This did not cause happiness. The solution to this was to also switch
to a temporary stack in a safe location before performing the final
copy of the loaded kernel.
r247216:
Use the UEFI Graphics Output Protocol to get the parameters of the
framebuffer.
Sponsored by: The FreeBSD Foundation
r247216:
Add the ability for a device to have an "alias" handle.
r247379:
Fix network device registration.
r247380:
Adjust our load device when we boot from CD under UEFI.
The process for booting from a CD under UEFI involves adding a FAT
filesystem containing your loader code as an El Torito boot image.
When UEFI detects this, it provides a block IO instance that points
at the FAT filesystem as a child of the device that represents the CD
itself. The problem being that the CD device is flagged as a "raw
device" while the boot image is flagged as a "logical partition".
The existing EFI partition code only looks for logical partitions and
so the CD filesystem was rendered invisible.
To fix this, check the type of each block IO device. If it's found to
be a CD, and thus an El Torito boot image, look up its parent device
and add that instead so that the loader will then load the kernel from
the CD filesystem. This is done by using the handle for the boot
filesystem as an alias.
Something similar to this will be required for booting from other media
as well as the loader will live in the EFI system partition, not on the
partition containing the kernel.
r247381:
Remove a scatalogical debug printf that crept in.
.. so that consistent compilation algorithms are used for both
architectures as in practice the binaries are expected to be
interchangeable (for time being).
Previously i386 used default setting which were equivalent to
-march=i486 -mtune=generic.
The only difference is using smaller but slower "leave" instructions.
Discussed with: jhb, dim
MFC after: 29 days
