turn it back on. Specifically, the actual changes are now less intrusive
in that the _get_spin_lock() and _rel_spin_lock() macros now have their
contents changed for UP vs SMP kernels which centralizes the changes.
Also, UP kernels do not use _mtx_lock_spin() and no longer include it. The
UP versions of the spin lock functions do not use any atomic operations,
but simple compares and stores which allow mtx_owned() to still work for
spin locks while removing the overhead of atomic operations.
Tested on: i386, alpha
to be the same as Boca Research Turbo Serial 654 (4 serial port).
While add the 8 port variants as well.
Submitted by: sten@blinkenlights.nl
PR: kern/75793
MFC after: 1 week
The main changes are:
1. Use of multiple bus dma tags.
2. Timing of CAM requests by the driver.
3, Firmware interface change relating to retrieving AEN's.
4. Removal of twa_intrhook.
5. Bundling of latest firmware with BBU capability.
Reviewed by:re
Approved by:re
interface as well. This is not an expected revision id per the
datasheet, but unfortunately there are such cards out there with
a 82557 chipset, and they want to use the 82503.
PR: kern/75739
Reported by: Andre Albsmeier <andre.albsmeier@siemens.com>
- Mark mount, unmount and nmount MPSAFE.
- Add a stub for _umtx_op().
- Mark open(), link(), unlink(), and freebsd32_sigaction() MPSAFE.
Pointy hats to: several
(we ignore it).
- Remove code used for handling spoil events, as spoiling is not possible
anymore, because we keep consumers open for writing all the time.
MFC after: 4 days
After disscussing things I have decided to take the easy and
consistent 90% solution instead of aiming for the very involved 99%
solution.
If we allow forceful unmounts of DEVFS we need to decide how to handle
the devices which are in use through this filesystem at the time.
We cannot just readopt the open devices in the main /dev instance since
that would open us to security issues.
For the majority of the devices, this is relatively straightforward
as we can just pretend they got revoke(2)'ed.
Some devices get tricky: /dev/console and /dev/tty for instance
does a sort of recursive open of the real console device. Other devices
may be mmap'ed (kill the processes ?).
And then there are disk devices which are mounted.
The correct thing here would be to recursively unmount the filesystems
mounte from devices from our DEVFS instance (forcefully) and if
this succeeds, complete the forcefully unmount of DEVFS. But if
one of the forceful unmounts fail we cannot complete the forceful
unmount of DEVFS, but we are likely to already have severed a lot
of stuff in the process of trying.
Event attempting this would be a lot of code for a very far out
corner-case which most people would never see or get in touch with.
It's just not worth it.
3C920B-EMB-WNM Integrated Fast Ethernet Controller
Submitter reports that the card appears to autonegotiate properly, and
operate well with high levels of NFS traffic.
PR: 75253
Submitted by: "Oleg V. Nauman" <oleg at reis dot zp dot ua>
MFC after: 2 weeks
only one set is needed for either endianess. This also completes them for
big endian archs and fixes the compilation of libncp, netncp, etc. there.
Reviewed by: bp, rwatson
Compile tested on: i386, sparc64
MFC after: 1 week
o Move the sysctls under debug.psm.* and hw.psm.* making them a bit
clearer and more consistent with other drivers.
o Remove the debug.psm_soft_timeout sysctl. It was introduced many
moons ago in r1.64 but never referenced anywhere.
o Introduce hw.psm.tap_threshold and hw.psm.tap_timeout to control
the behaviour of taps on touchpads. People might like to fiddle
with these if tapping seems to slow or too fast for them.
o Add debug.psm.loglevel as a tunable so that verbosity can be set
easily at boot-time (to watch probes and such) without having to
compile a kernel with options PSM_DEBUG=N.
that the RFC 793 specification for accepting RST packets should be
following. When followed, this makes one vulnerable to the attacks
described in "slipping in the window", but it may be necessary in
some odd circumstances.
spx_reass() to increase atomicity across multiple operations on the
socket buffer when iterating over the SPX fragment reassembly list
for the ipxpcb, as well a to reduce the number of locking operations.
record loop for ACK'd data, rather than relying on lokcing in
sbdroprecord() and sowwakeup(), reducing the number of lock operations
as well as eliminating a possible race against the head of the send
buffer mbuf chain. Use the _locked variants of sbdroprecord() and
sowwakeup().
the peer address by using M_WAITOK in ipx_setpeeraddr() to prevent
allocation failure. The socket reference used to reach these calls
will prevent the ipxpcb from being released prematurely.
properly handle the case where a connection is disconnected. The
queue(9)-enabled version of this code broke from the inner but not
outer loop, and so potentially frobbed an ipxpcb flag after the ipxpcb
was free'd, which might be picked up later by the malloc debugging
code. Properly break from the loop context and avoid touching the
cb/ipxpcb after free.
connection rates, which is causing problems for some users.
To retain the security advantage of random ports and ensure
correct operation for high connection rate users, disable
port randomization during periods of high connection rates.
Whenever the connection rate exceeds randomcps (10 by default),
randomization will be disabled for randomtime (45 by default)
seconds. These thresholds may be tuned via sysctl.
Many thanks to Igor Sysoev, who proved the necessity of this
change and tested many preliminary versions of the patch.
MFC After: 20 seconds
expects a locked route reference. This removes a panic that occurs
when connected ipxpcb is closed and its route free'd, and may have been
present since the route locking took place.
MFC after: 2 weeks
o implement double-extended and single precision loads and stores,
o implement double precision stores,
o replace the machdep.unaligned_print sysctl with debug.unaligned_print
and change the default value to 0,
o replace the machdep.unaligned_sigbus sysctl with debug.unaligned_test,
o Remmove the fillfd() function. The function is trvial enough for
inline assembly.
The debug.unaligned_test sysctl is used to test the emulation of
misaligned loads and stores. When PSR.ac is 0, the CPU will handle
misaligned memory accesses itselfi and we don't get an exception
for it. When PSR.ac is 1, the process needs to be signalled and we
should not emulate. The sysctl takes effect when PSR.ac is 1 and
tells us that we should emulate and not send a signal.
PR: 72268
MFC after: 1 week
function provided by the driver limits allocations to the page size,
i.e. 4KB on i385 and 8KB on typical 64 bit processors. Since amd64
has 64 bit pointers, but only 4KB pages, an array of pointers that
just fits into one page on all the other processors, does require
2 pages on amd64.
In order to make this driver useful on amd64, the allocation unit
has been increased to 2 pages on amd64 and contigmalloc() is used
instead of malloc(). All other processor types are unaffected by
this change. This modification has only been compile-tested on
amd64, yet, but should just work (FLW).
machine; instead use the intended entry points. There's still
too much incestuous knowledge about the internals of the
802.11 layer but this at least fixes adhoc mode.
o ic_inact_auth is a bad name, it's the inactivity threshold
for being associated but not authorized; use it that way
o reset ni_inact when switching inactivity thresholds to
minimize the race against the timer (don't want to lock
for this stuff)
o change the inactivity probe threshold from a one-shot to
cover a range: when below this threshold but not expired
send a probe each inactivity interval; should probably
guard against the interval being turned way down as this
could cause us to spam the net with probes
we're at it:
o WPA/802.11i has a unicast key and a group key; in station mode
everything is sent with the unicast key--we were consulting the
destination mac address and incorrectly using the group key
o (perpetuate fallback use of the default tx key to maintain
compatibility with the way wpa_supplicant works)
o correct EAPOL encryption logic to check unicast key instead
of assuming other state implies this
o move QoS encapsulation up to before enmic work so TKIP has the
information required to calculate the pseudo-header
o do not do QoS-encapsulation of EAPOL frames as some ap's do the
wrong thing with such frames (may need to revisit this if ap's
start dropping non-QoS frames from stations assoc'd with QoS)
o move ieee80211_mbuf_adjust closer to its caller
unloaded, cleanup, or return ebusy of that's inconvenient.' The
default module hanlder for newbus will now call this when we get a
MOD_QUIESCE event, but in the future may call this at other times.
This shouldn't change any actual behavior until drivers start to use it.
suggested by Peter Edwards. This seems to fix my fxp problems and
likely will fix his as well. Use DELAY rather than *sleep because we
can be called from any context.
o catch one place where we were not using ath_chan_change to
switch channels; this fixes a problem where the channel
settings were not being correctly reported in captured packets
o return unique channel identification in the channel flags;
ethereal gets confused if you return merged flags (e.g. ofdm,
cck, and 2Ghz) (this is workaround and should be removed if
we can ever cleanup radiotap consumers)
o correct short/long preamble flag state for rx and treat tx
the same--use a new hwflags array that gives us the data
based on the h/w rate index/cookie
o add gross hack to handle radiotap capture of frames that
come in with hardware padding; should be replaced by a
flag in the radiotap header and more smarts in the apps
that decode radiotap data
o lintval is in ms; must convert to TU's for passing to the hal
o roundup to calculate nexttbtt (should look at current tsf and pull the
calculated nextbtt forward but this'll do for now)
o don't or- in HAL_BEACON_RESET_TSF when doing station timer setup; this
is not needed and messes up the sleep timer calcs, though it's unclear
if it mattered as the hal masks these values before use
Submitted by: Thorsten von Eicken
the netperf branch but for some reason didn't trigger a build failure
locally when I merged to CVS and omitted it. Presumably driver error.
Pointed out by: cperciva, tinderbox
schedulers a bit to ensure more correct handling of priorities and fewer
priority inversions:
- Add two functions to the sched(9) API to handle priority lending:
sched_lend_prio() and sched_unlend_prio(). The turnstile code uses these
functions to ask the scheduler to lend a thread a set priority and to
tell the scheduler when it thinks it is ok for a thread to stop borrowing
priority. The unlend case is slightly complex in that the turnstile code
tells the scheduler what the minimum priority of the thread needs to be
to satisfy the requirements of any other threads blocked on locks owned
by the thread in question. The scheduler then decides where the thread
can go back to normal mode (if it's normal priority is high enough to
satisfy the pending lock requests) or it it should continue to use the
priority specified to the sched_unlend_prio() call. This involves adding
a new per-thread flag TDF_BORROWING that replaces the ULE-only kse flag
for priority elevation.
- Schedulers now refuse to lower the priority of a thread that is currently
borrowing another therad's priority.
- If a scheduler changes the priority of a thread that is currently sitting
on a turnstile, it will call a new function turnstile_adjust() to inform
the turnstile code of the change. This function resorts the thread on
the priority list of the turnstile if needed, and if the thread ends up
at the head of the list (due to having the highest priority) and its
priority was raised, then it will propagate that new priority to the
owner of the lock it is blocked on.
Some additional fixes specific to the 4BSD scheduler include:
- Common code for updating the priority of a thread when the user priority
of its associated kse group has been consolidated in a new static
function resetpriority_thread(). One change to this function is that
it will now only adjust the priority of a thread if it already has a
time sharing priority, thus preserving any boosts from a tsleep() until
the thread returns to userland. Also, resetpriority() no longer calls
maybe_resched() on each thread in the group. Instead, the code calling
resetpriority() is responsible for calling resetpriority_thread() on
any threads that need to be updated.
- schedcpu() now uses resetpriority_thread() instead of just calling
sched_prio() directly after it updates a kse group's user priority.
- sched_clock() now uses resetpriority_thread() rather than writing
directly to td_priority.
- sched_nice() now updates all the priorities of the threads after the
group priority has been adjusted.
Discussed with: bde
Reviewed by: ups, jeffr
Tested on: 4bsd, ule
Tested on: i386, alpha, sparc64
- ipx_pcbnotify(), which is never called.
- ipx_rtchange(), which is never called, is incomplete inplemented, and
also #ifdef notdef.
- spx_fixmtu(), which is never called, is incompletely implemented, and
also #ifdef notdef.
