It's necessary to reset the screen to make sure any vendor pixels are
gone when we start boot1. In the Lenovo X1 (3rd gen), this is the
only way to clear the screen. Previously, the Lenovo logo would only
disappear after the kernel started scrolling the display.
After resetting the screen, EFI could put us in the worst LCD mode
(oversized characters), so we now find the largest mode we can use and
hope it's the most appropriate one (it's not trivial to tell what's
the correct LCD resolution at this point). It's worth noting that the
final stage loader has a 'mode' command that can be used to switch
text modes.
While there, enable the software cursor, just like in the legacy boot
mode.
MFC after: 1 week
Even on Illumos, with its much larger KVA, ZFS ARC steps back if KVA usage
reaches certain threshold (3/4 on i386 or 16/17 otherwise). FreeBSD has
even less KVA, but had no such limit on archs with direct map as amd64.
As result, on machines with a lot of RAM, during load with very small user-
space memory pressure, such as `zfs send`, it was possible to reach state,
when there is enough both physical RAM and KVA (I've seen up to 25-30%),
but no continuous KVA range to allocate even single 128KB I/O request.
Address this situation from two sides:
- restore KVA usage limitations in a way the most close to Illumos;
- introduce new requirement for KVA fragmentation, specifying that we
should have at least one sequential KVA range of zfs_max_recordsize bytes.
Experiments show that first limitation done alone is not sufficient. On
machine with 64GB of RAM it is sometimes needed to drop up to half of ARC
size to get at leats one 1MB KVA chunk. Statically limiting ARC to half
of KVA/RAM is too strict, so second limitation makes it to work in cycles:
accumulate trash up to certain critical mass, do massive spring-cleaning,
and then start littering again. :)
MFC after: 1 month
work stack and is reused again on the receive ring. Remaining received packets in the ring are not processed in that
invocation of bxe_rxeof() and defered to the task thread.
MFC after: 5 days
Amd64 uses relocatable object files as the modules format. It is good
WRT not having unneeded overhead for PIC code, in particular, due to
absence of useless GOT and PLT. But the cost is that the module
linking process cannot use hash to speed up the symbol lookup, and
that each reference to the symbol requiring a relocation, instead of
single-place relocation in GOT.
Cache the successfull symbol lookup results in the module symbol
table, using the newly allocated SHN_FBSD_CACHED value from
SHN_LOOS-HIOS range as an indicator. The SHN_FBSD_CACHED together
with the non-existent definition of the found symbol are reverted
after successfull relocations, which is done under kld_sx lock, so it
should not be visible to other consumers of the symbol table.
Submitted by: Conrad Meyer
Differential Revision: https://reviews.freebsd.org/D1718
MFC after: 3 weeks
This was not (and still is not) connected to the build, but the EFI
loader is in the process of being built for other than amd64 so these
files ought to live in their eventual MD location.
header and not only partial flags and fields. Firewalls can attach
classification tags to the outgoing mbufs which should be copied to
all the new fragments. Else only the first fragment will be let
through by the firewall. This can easily be tested by sending a large
ping packet through a firewall. It was also discovered that VLAN
related flags and fields should be copied for packets traversing
through VLANs. This is all handled by "m_dup_pkthdr()".
Regarding the MAC policy check in ip_fragment(), the tag provided by
the originating mbuf is copied instead of using the default one
provided by m_gethdr().
Tested by: Karim Fodil-Lemelin <fodillemlinkarim at gmail.com>
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
PR: 7802
stage, just like for the regular world stage.
Reviewed by: rodrigc, imp, bapt, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D2187
not have interupt property in pl310 node. Interrupt is used only to
detect cache activity when L2 cache is disabled, it's not vital for
normal operations.
- Fix intrhook allocation/initialization
There are cases when gpioled nodes in DTS come from different sources
(e.g. standard Beaglebone Black LEDs in main DTS + shield LEDs in
overlay DTS) so instead of handling only first compatible node go
through all child nodes
where we want to create a new IP datagram.
o Add support for RFC6864, which allows to set IP ID for atomic IP
datagrams to any value, to improve performance. The behaviour is
controlled by net.inet.ip.rfc6864 sysctl knob, which is enabled by
default.
o In case if we generate IP ID, use counter(9) to improve performance.
o Gather all code related to IP ID into ip_id.c.
Differential Revision: https://reviews.freebsd.org/D2177
Reviewed by: adrian, cy, rpaulo
Tested by: Emeric POUPON <emeric.poupon stormshield.eu>
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Relnotes: yes
- bus_dmamap_create() does not take the BUS_DMA_NOWAIT flag
- properly unload maps
- do not assign NULL to dma map pointers
Submitted by: Konstantin Belousov <kostikbel@gmail.com>
Approved by: jfv (mentor)
MFC after: 1 week
A couple of internal functions used by malloc(9) and uma truncated
a size_t down to an int. This could cause any number of issues
(e.g. indefinite sleeps, memory corruption) if any kernel
subsystem tried to allocate 2GB or more through malloc. zfs would
attempt such an allocation when run on a system with 2TB or more
of RAM.
Note to self: When this is MFCed, sparc64 needs the same fix.
Differential revision: https://reviews.freebsd.org/D2106
Reviewed by: kib
Reported by: Michael Fuckner <michael@fuckner.net>
Tested by: Michael Fuckner <michael@fuckner.net>
MFC after: 2 weeks
On Ethernet packets have a minimal length, so very short packets get padding
appended to them. This padding is not stripped off in ip6_input() (due to
support for IPv6 Jumbograms, RFC2675).
That means PF needs to be careful when reassembling fragmented packets to not
include the padding in the reassembled packet.
While here also remove the 'Magic from ip_input.' bits. Splitting up and
re-joining an mbuf chain here doesn't make any sense.
Differential Revision: https://reviews.freebsd.org/D2189
Approved by: gnn (mentor)
When forwarding fragmented IPv6 packets and filtering with PF we
reassemble and refragment. That means we generate new fragment headers
and a new fragment ID.
We already save the fragment IDs so we can do the reassembly so it's
straightforward to apply the incoming fragment ID on the refragmented
packets.
Differential Revision: https://reviews.freebsd.org/D2188
Approved by: gnn (mentor)
Return EINVAL instead of EFTYPE if we have a multiboot kernel loaded but
failed to load the modules. This makes it clear that the kernel/module
should be handled by the multiboot handler but something went wrong.
Sponsored by: Citrix Systems R&D
Zero the list of modules array before using it, or else we might pass
uninitialized data in unused fields of the struct that will make Xen choke.
Also add a check to make sure malloc succeeds.
Sponsored by: Citrix Systems R&D
support for booting arm and arm64 from UEFI.
Differential Revision: https://reviews.freebsd.org/D2164
Reviewed by: emaste, imp (previous version)
Sponsored by: The FreeBSD Foundation
on reads or writes, the time marks are used to display idle time by
w(1) [1]. Instead, use vfs.devfs.dotimes as the selector of default
precision vs. using time_second. The later gives seconds precision,
which is good enough for the purpose.
Note that timestamp updates are unlocked and the updates itself, as
well as the check in devfs_timestamp, are non-atomic.
Noted by: truckman [1]
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the top-level HAL.
The athstats program is blindly using a copy of the ar5212 ANI stats structure
to pull out ANI statistics/state and this is problematic for the AR9300
HAL.
So:
* Define HAL_ANI_STATS and HAL_ANI_STATE
* Use HAL_ANI_STATS inside the AR5212 HAL
This commit doesn't (yet) convert the ar5212AniState -> HAL_ANI_STATE when
exporting it to userland; that'll come in the next commit.
Summary:
Add "GELI Passphrase:" prompt to boot loader.
A new loader.conf(5) option of geom_eli_passphrase_prompt="YES" will now
allow you to enter your geli(8) root-mount credentials prior to invoking
the kernel.
See check-password.4th(8) for details.
Differential Revision: https://reviews.freebsd.org/D2105
Reviewed by: (your name[s] here)
MFC after: 3 days
X-MFC-to: stable/10
Relnotes: yes
Test Plan:
Drop a head copy of check-password.4th into /boot and then apply the patch
(only the patch to /boot/check-password.4th is required; no other changes are
required but you do have to have a HEAD copy of check-password.4th to
apply the patch).
NB: The rest of your /boot files can be up to 2 years old but no older.
NB: The test won't work unless your kernel has the following change
https://svnweb.freebsd.org/base?view=revision&revision=273489
Now, put into /boot/loader.conf:
geom_eli_passphrase_prompt="YES"
and reboot.
You should be prompted for a GELI passphrase before the menu (if enabled),
just after loading loader.conf(5).
NB: It doesn't matter if you're using GELI or not. However if you are using
GELI and a sufficiently new enough release (has SVN r273489) and you entered
the proper passphrase to mount your GELI encrypted root device(s), you should
notice that the boot process did not stop (you went from loader all the way to login).
Reviewers: cperciva, allanjude, scottl, kmoore
Subscribers: jkh, imp
Differential Revision: https://reviews.freebsd.org/D2105
vocabularies delay-processing, password-processing, version-processing,
frame-drawing, menu-infrastructure, menu-namespace, menu-command-helpers,
and menusets-infrastructure. The net effect is to remove almost 200
definitions from the main forth vocabulary reducing the dictionary size
by over 50%. The chances of hitting "dictionary full" should be greatly
reduced by this patch.
MFC after: 3 days
X-MFC-to: stable/10
implementation.
The kernel RPC code, which is responsible for the low-level scheduling
of incoming NFS requests, contains a throttling mechanism that
prevents too much kernel memory from being tied up by NFS requests
that are being serviced. When the throttle is engaged, the RPC layer
stops servicing incoming NFS sockets, resulting ultimately in
backpressure on the clients (if they're using TCP). However, this is
a very heavy-handed mechanism as it prevents all clients from making
any requests, regardless of how heavy or light they are. (Thus, when
engaged, the throttle often prevents clients from even mounting the
filesystem.) The throttle mechanism applies specifically to requests
that have been received by the RPC layer (from a TCP or UDP socket)
and are queued waiting to be serviced by one of the nfsd threads; it
does not limit the amount of backlog in the socket buffers.
The original implementation limited the total bytes of queued requests
to the minimum of a quarter of (nmbclusters * MCLBYTES) and 45 MiB.
The former limit seems reasonable, since requests queued in the socket
buffers and replies being constructed to the requests in progress will
all require some amount of network memory, but the 45 MiB limit is
plainly ridiculous for modern memory sizes: when running 256 service
threads on a busy server, 45 MiB would result in just a single
maximum-sized NFS3PROC_WRITE queued per thread before throttling.
Removing this limit exposed integer-overflow bugs in the original
computation, and related bugs in the routines that actually account
for the amount of traffic enqueued for service threads. The old
implementation also attempted to reduce accounting overhead by
batching updates until each queue is fully drained, but this is prone
to livelock, resulting in repeated accumulate-throttle-drain cycles on
a busy server. Various data types are changed to long or unsigned
long; explicit 64-bit types are not used due to the unavailability of
64-bit atomics on many 32-bit platforms, but those platforms also
cannot support nmbclusters large enough to cause overflow.
This code (in a 10.1 kernel) is presently running on production NFS
servers at CSAIL.
Summary of this revision:
* Removes 45 MiB limit on requests queued for nfsd service threads
* Fixes integer-overflow and signedness bugs
* Avoids unnecessary throttling by not deferring accounting for
completed requests
Differential Revision: https://reviews.freebsd.org/D2165
Reviewed by: rmacklem, mav
MFC after: 30 days
Relnotes: yes
Sponsored by: MIT Computer Science & Artificial Intelligence Laboratory
%rdi, %rsi, etc are inadvertently bypassed along with the check to
see if the instruction needs to be repeated per the 'rep' prefix.
Add "MOVS" instruction support for the 'MMIO to MMIO' case.
Reviewed by: neel
specially aml8726-m6 and aml8726-m8b SoC based devices.
aml8726-m6 SoC exist in devices such as Visson ATV-102.
Hardkernel ODROID-C1 board has aml8726-m8b SoC.
The following support is included:
Basic machdep code
SMP
Interrupt controller
Clock control driver (aka gate)
Pinctrl
Timer
Real time clock
UART
GPIO
I2C
SD controller
SDXC controller
USB
Watchdog
Random number generator
PLL / Clock frequency measurement
Frame buffer
Submitted by: John Wehle
Approved by: stas (mentor)
on Intel processors. Clear spurious dependency by explicitely xoring
the destination register of popcnt.
Use bitcount64() instead of re-implementing SWAR locally, for
processors without popcnt instruction.
Reviewed by: jhb
Discussed with: jilles (previous version)
Sponsored by: The FreeBSD Foundation
rather than 20. The MP 1.4 specification states in Appendix B.2:
"A period of 20 microseconds should be sufficient for IPI dispatch to
complete under normal operating conditions".
(Note that this appears to be separate from the 10 millisecond (INIT) and
200 microsecond (STARTUP) waits after the IPIs are dispatched.) The
Intel SDM is silent on this issue as far as I can tell.
At least some hardware requires 60 microseconds as noted in the PR, so
bump this to 100 to be on the safe side.
PR: 197756
Reported by: zaphod@berentweb.com
MFC after: 1 week
ask for resource reclamation again.
This is kind of dirty hack, but as last resort this is better then stuck
indefinitely because of KVA fragmentation, waiting until some random event
free something sufficient. OpenSolaris also has this hack in its vmem(9).
MFC after: 2 weeks
uintptr_t may be 64-bit on some platforms, therefore when
finding xrefinfo by pointer to device the high word is being
cut off due to cast to phandle_t which is 32-bit long by definition.
Due to that we loose the high word of the address to compare with
xi->dev's address.
To fix that, first argument of xrefinfo_find() is extended to
uintptr_t and is being cast to appropriate type (phandle_t)
when compared.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: nwhitehorn
Obtained from: Semihalf
Handle the VIRQ_DEBUG signal and print a stack trace of each vCPU on the Xen
console. This is only used for debug purposes and is triggered by the
administrator of the Xen host.
Sponsored by: Citrix Systems R&D
MFC after: 1 week
This adds an upper bound, dtrace_ustackdepth_max, to the number of frames
traversed when computing the userland stack depth. Some programs - notably
firefox - are otherwise able to trigger an infinite loop in
dtrace_getustack_common(), causing a panic.
MFC after: 1 week
This is used by the 'athsurvey' command to print out channel survey
statistics - % busy times transmit, receive and airtime.
It's as buggy and incomplete as the rest of the HAL survey support -
notably, tying into the ANI code to read channel stats and occasionally
getting garbage counters isn't very nice. It also doesn't (yet!) get
channel survey information during a scan. But it's good enough for
basic air-time debugging, which is why I'm committing it in this state.
Tested:
* AR9380, STA mode
rathe than private in each HAL module.
Whilst here, modify ath_hal_private to always have the per-channel
noisefloor stats, rather than conditionally. This just makes
life easier in general (no strange ABI differences between different
HAL compile options.)
Add a couple of methods (clear/reset, add) rather than using
hand-rolled versions of things.
This symptom is "calibrations don't ever run", which may cause some
pretty spectacularly bad behaviour in noisy environments or with longer
uptimes.
Thanks to dtrace to make it easy to check if specific non-inlined functions
are getting called by things like the ANI and calibration HAL methods.
Grr.
Tested:
* AR9380, STA mode
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri May 31 12:17:08 2013 +0000
drm: Sort connector modes based on vrefresh
Keeping the modes sorted by vrefresh before the pixel clock makes the
mode list somehow more pleasing to the eye.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
PR: 198936
Obtained from: Linux
MFC after: 1 month
MFC with: r280183
will depend on ficl having been built, and are set via bsd.arch.inc.mk we
need to place this after ficl.
As Makefile.amd64 is now late enough we can add the i386 directory to this.
In particular, such DDB commands were added:
show vmem <addr>
show all vmem
show vmemdump <addr>
show all vmemdump
As possible usage, that allows to see KVA usage and fragmentation.
which showed up after I started changing addresses this early.
It turns out that there's some other malarky going on behind the scenes
in the HAL and merely setting the net80211/ifp mac address this early
isn't enough. If the MAC is set from kenv at attach time, the HAL
also needs to be programmed early.
Without this, the VAP wouldn't work enough for finishing association -
probe requests would be fine as they're broadcast, but association
request would fail.
Older compilers, and compatibility modes, may not support variadic macros.
I normally wouldn't go out of my way to support those old compilers but
there is a prescendent in other system headers for using the same macro
multiple times, and the solution (although non-elegant IMHO) works.
Requested by: bde
Solution by: tijl
This allows the TL-WDR3600 to use the correct MAC address for ath0, ath1
and arge0. arge1 isn't used; until I disable it entirely it'll just
show up with a randomly generated MAC.
This is used by the AR71xx platform code to choose a local MAC based on
the "board MAC address", versus whatever potentially invalid/garbage
values are stored in the Atheros calibration data.
A lot of these dinky atheros based MIPS boards don't have a nice, well,
anything consistent defining their MAC addresses for things.
The Atheros reference design boards will happily put MAC addresses
into the wifi module calibration data like they should, and individual
ethernet MAC addresses into the calibration area in flash.
That makes my life easy - "hint.arge.X.eeprommac=<addr>" reads from
that flash address to extract a MAC, and everything works fine.
However, aside from some very well behaved vendors (eg the Carambola 2
board), everyone else does something odd.
eg:
* a MAC address in the environment (eg ubiquiti routerstation/RSPRO)
that you derive arge0/arge1 MAC addresses from.
* a MAC address in flash that you derive arge0/arge1 MAC addresses from.
* The wifi devices having their own MAC addresses in calibration data,
like normal.
* The wifi devices having a fixed, default or garbage value for a MAC
address in calibration data, and it has to be derived from the
system MAC.
So to support this complete nonsense of a situation, there needs to be
a few hacks:
* The "board" MAC address needs to be derived from somewhere and squirreled
away. For now it's either redboot or a MAC address stored in calibration
flash.
* Then, a "map" set of hints to populate kenv with some MAC addresses
that are derived/local, based on the board address. Each board has
a totally different idea of what you do to derive things, so each
map entry has an "offset" (+ve or -ve) that's added to the board
MAC address.
* Then if_arge (and later, if_ath) should check kenv for said hint and
if it's found, use that rather than the EEPROM MAC address - which may
be totally garbage and not actually work right.
In order to do this, I've undone some of the custom redboot expecting
hacks in if_arge and the stuff that magically adds one to the MAC
address supplied by the board - instead, as I continue to test this
out on more hardware, I'll update the hints file with a map explaining
(a) where the board MAC should come from, and (b) what offsets to use
for each device.
The aim is to have all of the tplink, dlink and other random hardware
we run on have valid MAC addresses at boot, so (a) people don't get
random B:S:D❌x:x ethernet MACs, and (b) the wifi MAC is valid
so it works rather than trying to use an invalid address that
actually upsets systems (think: multicast bit set in BSSID.)
Tested:
* TP-Link TL_WDR3600 - subsequent commits will add the hints map
and the if_ath support.
TODO:
* Since this is -HEAD, and I'm all for debugging, there's a lot of
printf()s in here. They'll eventually go under bootverbose.
* I'd like to turn the macaddr routines into something available
to all drivers - too many places hand-roll random MAC addresses
and parser stuff. I'd rather it just be shared code.
However, that'll require more formal review.
* More boards.
in this area and by the Clang static analyzer.
Remove some dead assignments.
Fix a typo in a panic string.
Use umtx_pi_disown() instead of duplicate code.
Use an existing variable instead of curthread.
Approved by: kib (mentor)
MFC after: 3 days
Sponsored by: Dell Inc
common (autogenerated) versions. Removes extra vertical space,
and makes it easier to grep for usage throughout the tree.
Conditionally compile only for arm6 [1] (yes sounds odd but is right).
Submitted by: andrew [1]
Reviewed by: gnn, andrew (ian earlier version I think)
Differential Revision: https://reviews.freebsd.org/D2159
Obtained from: Cambridge/L41
Sponsored by: DARPA, AFRL
CPU, also add protection against invalid CPU's as well as
split c_flags and c_iflags so that if a user plays with the active
flag (the one expected to be played with by callers in MPSAFE) without
a lock, it won't adversely affect the callout system by causing a corrupt
list. This also means that all callers need to use the macros and *not*
play with the falgs directly (like netgraph used to).
Differential Revision: htts://reviews.freebsd.org/D1894
Reviewed by: .. timed out but looked at by jhb, imp, adrian hselasky
tested by hiren and netflix.
Sponsored by: Netflix Inc.
originated from the return to usermode. #ss must be handled same as
#np.
Reported by: Andrew Lutomirski through secteam
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Without this the autotuning fails for small amounts of RAM (32mb),
which all the AR91xx shipping products seemed to have.
Thanks to gjb for reminding me to re-test this stuff.
Tested:
* AR91xx, TP-Link TL-WR1043nd v1
duplicated code in the two classes, and also allows devices in FDT-based
systems to declare simplebus as their parent and still work correctly
when the FDT data describes the device at the root of the tree rather
than as a child of a simplebus (which is common for interrupt, clock,
and power controllers).
Differential Revision: https://reviews.freebsd.org/D1990
Submitted by: Michal Meloun
are built by default. You can still override that with MODULES_EXTRA
for experimental features like ZFS and dtrace on some
architectures. Also note that kernel config files are not affected by
MK_ options listed, though some targets might be.
- make sure the timeout computations are always above zero by using
the existing "linux_timer_jiffies_until()" function. Negative timeouts
can result in undefined behaviour.
- declare all completion functions like external symbols and move the
code to the LinuxAPI kernel module.
- add a proper prefix to all LinuxAPI kernel functions to avoid
namespace collision with other parts of the FreeBSD kernel.
- clean up header file inclusions in the linux/completion.h, linux/in.h
and linux/fs.h header files.
MFC after: 1 week
Sponsored by: Mellanox Technologies
sequence is performed on UFS SU+J rootfs:
cp -Rp /sbin/init /sbin/init.old
mv -f /sbin/init.old /sbin/init
Hang occurs on the rootfs unmount. There are two issues:
1. Removed init binary, which is still mapped, creates a reference to
the removed vnode. The inodeblock for such vnode must have active
inodedep, which is (eventually) linked through the unlinked list. This
means that ffs_sync(MNT_SUSPEND) cannot succeed, because number of
softdep workitems for the mp is always > 0. FFS is suspended during
unmount, so unmount just hangs.
2. As noted above, the inodedep is linked eventually. It is not
linked until the superblock is written. But at the vfs_unmountall()
time, when the rootfs is unmounted, the call is made to
ffs_unmount()->ffs_sync() before vflush(), and ffs_sync() only calls
ffs_sbupdate() after all workitems are flushed. It is masked for
normal system operations, because syncer works in parallel and
eventually flushes superblock. Syncer is stopped when rootfs
unmounted, so ffs_sync() must do sb update on its own.
Correct the issues listed above. For MNT_SUSPEND, count the number of
linked unlinked inodedeps (this is not a typo) and substract the count
of such workitems from the total. For the second issue, the
ffs_sbupdate() is called right after device sync in ffs_sync() loop.
There is third problem, occuring with both SU and SU+J. The
softdep_waitidle() loop, which waits for softdep_flush() thread to
clear the worklist, only waits 20ms max. It seems that the 1 tick,
specified for msleep(9), was a typo.
Add fsync(devvp, MNT_WAIT) call to softdep_waitidle(), which seems to
significantly help the softdep thread, and change the MNT_LAZY update
at the reboot time to MNT_WAIT for similar reasons. Note that
userspace cannot create more work while devvp is flushed, since the
mount point is always suspended before the call to softdep_waitidle()
in unmount or remount path.
PR: 195458
In collaboration with: gjb, pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
When CPU is not busy, those queues are typically empty. When CPU is busy,
then one more extra sorting is the last thing it needs. If specific device
(HDD) really needs sorting, then it will be done later by CAM.
This supposed to fix livelock reported for mirror of two SSDs, when UFS
fires zillion of BIO_DELETE requests, that totally blocks I/O subsystem by
pointless sorting of requests and responses under single mutex lock.
MFC after: 2 weeks
the PMC_IN_KERNEL() macro definition.
Add missing macros to extract the return address (LR) from the trapframe.
Discussed with: andrew
Obtained from: Cambridge/L41
Sponsored by: DARPA, AFRL
MFC after: 2 weeks
any defaults or user specified actions on the command line. This would
be useful for specifying features that are always broken or that
cannot make sense on a specific architecture, like ACPI on pc98 or
EISA on !i386 (!x86 usage of EISA is broken and there's no supported
hardware that could have it in any event). Any items in
__ALWAYS_NO_OPTIONS are forced to "no" regardless of other settings.
Differential Revision: https://reviews.freebsd.org/D2011
This is pretty much a complete rewrite based on the existing i386 code. The
patches have been circulating for a couple years and have been looked at by
plenty of people, but I'm not putting anybody on the hook as having reviewed
this in any formal sense except myself.
After this has gotten wider testing from the user community, ARM_NEW_PMAP
will become the default and various dregs of the old pmap code will be
removed.
Submitted by: Svatopluk Kraus <onwahe@gmail.com>,
Michal Meloun <meloun@miracle.cz>
set of machine headers needed to build the userland toolchain.
Differential Revision: https://reviews.freebsd.org/D2148
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
the startup trampoline code. The old code allocated a kva page, mapped it
using using pmap_kenter_nocache(), then freed the kva without destroying
the mapping. This is the only use of pmap_kenter_nocache() in the system,
so redoing this one use of allows it to be garbage collected in the
near future.
Swap device is still reported as enabled, and system still may crash later
if some swapped-out kernel pages were lost with the device, but at least
GEOM and CAM can now release the lost disk, allowing it to be reconnected.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Bring support for two gcc function attributes that are likely to be used
in our system headers:
__alloc_size
The alloc_size attribute is used to tell the compiler that the function
return value points to memory, where the size is given by one or two of
the functions parameters.
__result_use_check
Causes a warning to be emitted if a caller of the function with this
attribute does not use its return value. This is known in gcc as
"warn_unused_result" but we considered the original naming unsuitable
for an attribute.
The __alloc_size attribute required some workarounds for lint(1).
Both attributes are supported by clang.
Also see: D2107
MFC after: 3 days
where counter was incremented on parent, instead of vlan(4) interface.
The second is more complicated. Historically, in our stack the incoming
packets are accounted in drivers, while incoming bytes for Ethernet
drivers are accounted in ether_input_internal(). Thus, it should be
removed from vlan(4) driver.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
the Raspberry Pi B we support most of the devices are already supported,
however the base address has changed.
A few items are not working, or missing. The main ones are:
* DMA doesn't work in the sdhci driver.
* Enabling vchiq halts the boot, may be interrupt related.
* There is no U-Boot port yet so the DTB is embedded in the kernel.
The last point will make it difficult to boot FreeBSD, however there is
support for the Raspberry Pi 2 in the U-Boot git repo. As I have not tested
this it is left as an open task to create a port to build.
X-MFC: When the above issues are fixed
Sponsored by: ABT Systems Ltd
number of dynamically created and destroyed SYSCTLs during runtime it
is very likely that the current new OID number limit of 0x7fffffff can
be reached. Especially if dynamic OID creation and destruction results
from automatic tests. Additional changes:
- Optimize the typical use case by decrementing the next automatic OID
sequence number instead of incrementing it. This saves searching time
when inserting new OIDs into a fresh parent OID node.
- Add simple check for duplicate non-automatic OID numbers.
MFC after: 1 week
vm.boot_pages is marked as a CTLFLAG_RDTUN, but it's used by the VM
before the sysctl subsystem is initialsed. We manually fetch the
variable from the environment to work around this problem.
Tested by: Keith White kwhite at uottawa.ca
MFC after: 1 week
code segment base address.
Also if an instruction doesn't support a mod R/M (modRM) byte, don't
be concerned if the CPU is in real mode.
Reviewed by: neel
statements. This allows for setting all PCM core parameters in the
kernel environment through loader.conf(5) or kenv(1) which is useful
for pluggable PCM devices like USB audio devices which might be
plugged after that sysctl.conf(5) is executed.
requested size. If tag restrictions caused split entry, its size is
less then requsted.
Hardware provided by: Michael Fuckner <michael@fuckner.net>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the right solution but I will leave it to experts to untangle this
problem to properly stop the build failures.
At the moment only if_ix.c includes dev/netmap/ixgbe_netmap.h which is
good as ixgbe_netmap.h defines a couple of (file) static variables--thus
local to if_ix.c.
static int ix_crcstrip however now also got checked from ix_txrx.c
(as an extern) and should not be visible there. In fact we do see
powerpc and powerpc64 build failures because of this. It is unclear
to me why on other (clang built?) architectures this does not lead
to a reference of an undefined symbol and similar build breakage.
There are four places, all in cam_xpt.c, where ccbs are malloc'ed. Two of
these use M_ZERO, two don't. The two that don't meant that allocated ccbs
had trash in them making it hard to debug errors where they showed up. Due
to this, use M_ZERO all the time when allocating ccbs.
Submitted by: Scott Ferris <scott.ferris@isilon.com>
Sponsored by: EMC/Isilon Storage Division
Reviewed by: scottl, imp
Differential: https://reviews.freebsd.org/D2120
NB: Using NULL for default values in-case someone
or something uncomments it and reboots. See
check-password.4th(8) for additional details.
MFC after: 3 days
X-MFC-to: stable/10 stable/9
When taking user input, don't show asterisks as the user types
but instead spin a twiddle. Implement Ctrl-U to clear user input.
If the buffer is empty, either because the user has yet to type
anything, presses Ctrl-U at any time, or presses backspace enough
to end in an empty buffer, the twiddle is erased to provide feed-
back to the user.
MFC after: 3 days
X-MFC-to: stable/10 stable/9
locking out everyone in the case of setting a password longer than
the maximum (currently 16 characters). Now the required password is
truncated to the maximum input that can be read from the user.
PR: kern/198760
MFC after: 3 days
MFH: stable/10 stable/9
This is a temporary workaround until we determine a reliable sequence
of operations for detecting MC reboots.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2084
bus_space_*_8() are not always macros, so it is not correct to use
#ifndef.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2083
Tx multi queue is added in FreeBSD 8.0. So, the changeset drops earlier
versions support.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2081
In theory the barriers are required to cope with write combining and
reordering. Two barriers are added (sometimes merged to one):
1. Before the first write to guarantee that previous writes to the region
have been done
2. Before the last write to guarantee that write to the last dword/qword is
done after previous writes
Barriers are inserted before in the assumption that it is better to
postpone barriers as much as it is possible (more chances that the
operation has already been already done and barrier does not stall CPU).
On x86 and amd64 bus space write barriers are just compiler memory barriers
which are definitely required.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2077
ioctl to put interface down sets ifp->if_flags which holds the intended
administratively defined state and calls driver callback to apply it.
When everything is done, driver updates internal copy of
interface flags sc->if_flags which holds the operational state.
So, transmit from Rx path is possible when interface is intended to be
administratively down in accordance with ifp->if_flags, but not applied
yet and the operational state is up in accordance with sc->if_flags.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2075
port loader.efi to both 32 and 64-bit ARM where we can use this file with
minimal changes.
Differential Revision: https://reviews.freebsd.org/D2031
Reviewed by: imp
There's a bug in the ticks handling where when initialised at '0', once
the ticks counter wrapped the comparison math would never trigger.
The pps calculation would never happen, and thus aggregation was never
enabled.
It manifests itself as "oh you only get 11n transmit aggregation for the
first 10 minutes of uptime."
I'm sure there are other ticks related issues lurking in net80211.
Tested:
* ath / iwn, both with 'wlandebug +11n' and a little bit of iperf to
kick off the transmit A-MPDU negotiation once the pps gets high enough.
delist_dev() function. In addition to this change:
- add a proper description of this function
- add a proper witness assert inside this function
- switch a nearby line to use the "cdp" pointer instead of cdev2priv()
MFC after: 3 days
The magic number MSDOSFS_ARGSMAGIC, which used to distinguish
"old" vs "new" msdosfs mount arguments, has not been used since
2005; it should just go away now.
Likewise, the local-to-Unicode table that changed at the same
time is unused.
Leave the space reserved in the old style mount arguments, though,
since we still support the old mount call (via the cmount entry
point).
Submitted by: Chris Torek <chris.torek@gmail.com>
MFC after: 2 weeks
This is based on the AP135 design - QCA9558 SoC, 3x3 2GHz wifi, but no
5GHz (11n or 11ac) chip is available.
It however still has 128MiB of RAM, 16MiB of NOR flash and the AR8327N
gigabit switch - so it's quite a beefy router device.
Tested:
* Well, a unit, naturally
Obtained from: Completely messing up an amazon.com order and getting this instead, and asking "hey, wonder if I could.."
* add ipfw
* delete ath / ath_ahb for now, until I can have Warner beat me
with the clue stick about putting in conditional build things into
the ath Makefile so the module builds can just have the HAL bits
that are relevant for a particular target.
path.
* For now there's no exposed control over classic / LNA antenna diversity,
so just stub them out. Adding this will take quite a bit of time.
* Add a function to fetch the CTS timeout.
PR: kern/198558
This allows us to get rid of bzero which was added specifically to make
mtx_init on p_mtx reliable.
This also fixes a potential problem where mtx_init on other mutexes
could trip over on unitialized memory and fire an assertion.
Reviewed by: kib
proc_set_cred_init can be used to set first credentials of a new
process.
Update proc_set_cred assertions so that it only expects already used
processes.
This fixes panics where p_ucred of a new process happens to be non-NULL.
Reviewed by: kib
Prior to this change the kernel would take p1's credentials and assign
them tempororarily to p2. But p1 could change credentials at that time
and in effect give us a use-after-free.
No objections from: kib
named objects to zero before the virtual address is selected. Previously,
the color setting was delayed until after the virtual address was
selected. In rtld, this delay effectively prevented the mapping of a
shared library's code section using superpages. Now, for example, we see
the first 1 MB of libc's code on armv6 mapped by a superpage after we've
gotten through the initial cold misses that bring the first 1 MB of code
into memory. (With the page clustering that we perform on read faults,
this happens quickly.)
Differential Revision: https://reviews.freebsd.org/D2013
Reviewed by: jhb, kib
Tested by: Svatopluk Kraus (armv6)
MFC after: 6 weeks
we're not looking at it.
Fix this by increasing l2->l2_occupancy before we try to alloc (and decrease
it if the allocation failed, or if another thread did a similar allocation).
Submitted by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
MFC after: 1 week
- Use real locking, replace Giant with global sx protecting the
subsystem. Since the subsystem' lock is no longer dropped during
the sleepsk, remove not needed SHMSEG_WANTED segment flag, and
revert r278963.
- To do proper code simplification possible after the change of the
lock, restructure several functions into _locked body and
originally-named wrapper which calls into _locked variant. This
allows to eliminate the 'goto done2' spread over the code.
- Merge shm_find_segment_by_shmid() and shm_find_segment_by_shmidx().
- Consistently change all function prototypes to ANSI C.
Reviewed by: mjg (who has earlier version of the similar patch to
introduce real locking)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
appears to be too inaccurate that it can be used to synchronize the
playback data stream. If there is a recording endpoint associated with
the playback endpoint, use that instead. That means if the isochronous
OUT endpoint is asynchronus the USB audio driver will automatically
start recording, if possible, to get exact information about the
needed sample rate adjustments. In no recording endpoint is present,
no rate adaption will be done.
While at it fix an issue where the hardware buffer pointers don't get
reset at the first device PCM trigger.
Make some variables 32-bit to avoid problems with multithreading.
MFC after: 3 days
PR: 198444
These are actually almost the same units; except one is 3x3 5GHz, and
one is 2x2 5GHz.
Tested:
* TP-Link TL-WDR3600
TODO:
* The ath0/ath1 MAC addresses are ye garbage (00:02:03:04:05:06); fixing
that will take a little more time. It works fine with the ath0/ath1
MAC addresses set manually.
* Go through and yank the AR9344 on-board switch config (arswitch1);
it's not required here for this AP.
The AR934x (and maybe others in this family) have a more complicated
GPIO mux. The AR71xx just has a single function register for a handful
of "GPIO or X" options, however the AR934x allows for one of roughly
100 behaviours for each GPIO pin.
So, this adds a quick hints based mechanism to configure the output
functions, which is required for some of the more interesting board
configurations. Specifically, some use external LNAs to improve
RX, and without the MUX/output configured right, the 2GHz RX side
will be plain terrible.
It doesn't yet configure the "input" side yet; I'll add that if
it's required.
Tested:
* TP-Link TL-WDR3600, testing 2GHz STA/AP modes, checking some
basic RX sensitivity things (ie, "can I see the AP on the other
side of the apartment that intentionally has poor signal reception
from where I am right now.")
Whilst here, fix a silly bug in the maxpin routine; I was missing
a break.
Previously format string traversal could happen while the string itself was
being modified.
Use allproc_lock as coredumping is a rare operation and as such we don't
have to create a dedicated lock.
Submitted by: Tiwei Bie <btw mail.ustc.edu.cn>
Reviewed by: kib
X-Additional: JuniorJobs project
Currently we update timestamps unconditionally when doing read or
write operations. This may slow things down on hardware where
reading timestamps is expensive (e.g. HPET, because of the default
vfs.timestamp_precision setting is nanosecond now) with limited
benefit.
A new sysctl variable, vfs.devfs.dotimes is added, which can be
set to non-zero value when the old behavior is desirable.
Differential Revision: https://reviews.freebsd.org/D2104
Reported by: Mike Tancsa <mike sentex net>
Reviewed by: kib
Relnotes: yes
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
