Implement most of timer_{create,settime,gettime,getoverrun,delete}
for amd64/linux32. Fix the entirely bogus (untested) version from
r161310 for i386/linux using the same shared code in compat/linux.
It is unclear to me if we could support more clock mappings but
the current set allows me to successfully run commercial
32bit linux software under linuxolator on amd64.
Reviewed by: jhb
Differential Revision: D784
Sponsored by: DARPA, AFRL
Approved by: re (gjb)
This feature is required by Mesa 9.2+. Without this, a GL application
crashes with the following message:
# glxinfo
name of display: :0.0
Gen6+ requires Kernel 3.6 or later.
Assertion failed: (ctx->Version > 0), function handle_first_current,
file ../../src/mesa/main/context.c, line 1498.
Abort (core dumped)
Now, Mesa 10.2.4 and 10.3-rc3 works fine:
# glxinfo
name of display: :0
display: :0 screen: 0
direct rendering: Yes
...
OpenGL renderer string: Mesa DRI Intel(R) 965GM
OpenGL version string: 2.1 Mesa 10.2.4
...
The code was imported from Linux 3.8.13.
This an MFC of r271705.
Approved by: re (glebius)
Reviewed by: kib@
Tested by: kwm@, danfe@, Henry Hu,
Lundberg, Johannes <johannes@brilliantservice.co.jp>,
Johannes Dieterich <dieterich.joh@gmail.com>,
Lutz Bichler <lutz.bichler@gmail.com>,
Relnotes: yes
- Update the OFED Linux Emulation layer as a preparation for a
hardware driver update from Mellanox Technologies.
- Remove empty files from the OFED Linux Emulation layer.
- Fix compile warnings related to printf() and the "%lld" and "%llx"
format specifiers.
- Add some missing 2-clause BSD copyrights.
- Add "Mellanox Technologies, Ltd." to list of copyright holders.
- Add some new compatibility files.
- Fix order of uninit in the mlx4ib module to avoid crash at unload
using the new module_exit_order() function.
Sponsored by: Mellanox Technologies
Bring in the new automounter, similar to what's provided in most other
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
Relnotes: yes
Sponsored by: The FreeBSD Foundation
- It was decided to change the driver name to if_ixl for FreeBSD
- This release adds the VF Driver to the tree, it can be built into
the kernel or as the if_ixlv module
- The VF driver is independent for the first time, this will be
desireable when full SRIOV capability is added to the OS.
Submitted by: jack.vogel@intel.com and eric.joyner@intel.com
We haven't noticed that it was missing because eisa has been disabled for
a while in -current, but it became apparent when some parallel-build stuff
was MFC'd to 10-stable and this module failed to build there.
r269413, r269428, r269440, r269537, r269644, r269731, and the cxgbe
portion of r270063.
r266571:
cxgbe(4): Remove stray if_up from the code that creates the tracing ifnet.
r266757:
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards.
Netmap gets its own hardware-assisted virtual interface and won't take
over or disrupt the "normal" interface in any way. You can use both
simultaneously.
For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface
(note the 'n' prefix) in the hardware to accompany each cxl<N>
interface. These two ifnet's per port share the same wire but really
are separate interfaces in the hardware and software. Each gets its own
L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You
should run netmap on the 'n' interfaces only, that's what they are for.
With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port
of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now.
Single port receive is at 33Mpps but this is very much a work in
progress. I expect it to be closer to 40Mpps once done. In any case
the current effort can already saturate multiple 10G ports of a T5 card
at the smallest legal packet size. T4 gear is totally untested.
trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43🆎cd:ef
881.952141 main [1621] interface is ncxl0
881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0
881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0
881.962540 main [1804] mapped 334980KB at 0x801dff000
Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus.
10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43🆎cd:ef)
881.962562 main [1882] Sending 512 packets every 0.000000000 s
881.962563 main [1884] Wait 2 secs for phy reset
884.088516 main [1886] Ready...
884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1
884.088607 sender_body [996] start
884.093246 sender_body [1064] drop copy
885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec)
886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec)
887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec)
888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec)
889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec)
890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec)
891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec)
892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec)
893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec)
894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec)
895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec)
896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec)
...
r268536:
cxgbe(4): Add an iSCSI softc to the adapter structure.
r269076:
Some hooks in cxgbe(4) for the offloaded iSCSI driver.
r269364:
Improve compliance with style.Makefile(5).
r269366:
List one file per line in the Makefiles. This makes it easier to read
diffs when a file is added or removed.
r269411:
cxgbe(4): minor optimizations in ingress queue processing.
Reorganize struct sge_iq. Make the iq entry size a compile time
constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly.
r269413:
cxgbe(4): Fix an off by one error when looking for the BAR2 doorbell
address of an egress queue.
r269428:
cxgbe(4): some optimizations in freelist handling.
r269440:
cxgbe(4): Remove an unused version of t4_enable_vi.
r269537:
cxgbe(4): Do not run any sleepable code in the SIOCSIFFLAGS handler when
IFF_PROMISC or IFF_ALLMULTI is being flipped. bpf(4) holds its global
mutex around ifpromisc in at least the bpf_dtor path.
r269644:
cxgbe(4): Let caller specify whether it's ok to sleep in
t4_sched_config and t4_sched_params.
r269731:
cxgbe(4): Do not poke T4-only registers on a T5 (and vice versa).
Relnotes: Yes (native netmap support for Chelsio T4/T5 cards)
Remove aicasm as a build dependency. It made sense when the ahc and ahd
drivers and their firmware were under active development, but those days
have passed. The firmware now exists in pre-compiled form, no longer
dependent on it's sources or on aicasm. If you wish to rebuild the
firmware from source, the glue still exists under the 'make firmware'
target in sys/modules/aic7xxx.
This also fixes the problem introduced with r257777 et al with building
kernels the old fashioned way in sys/$arch/compile/$CONFIG when the
ahc/ahd drivers were included.
Changes to how the aicasm tool is built. This series of changes results
in the aicasm tool being built as part of the tools stages of world and
kernel builds.
Most of these changes will ultimately be undone when r260401 is MFC'd,
but it will leave in place the new kernel-build-tool machinery (KTMAKE
stuff) in case a new special kernel tool ever comes along.
Merge if_nf10bmac(4), a driver to support an NetFPGA-10G Embedded
CPU Ethernet Core.
The current version operates on a simple PIO based interface connected
to a NetFPGA-10G port.
To avoid confusion: this driver operates on a CPU running on the FPGA,
e.g. BERI/mips, and is not suited for the PCI host interface.
Adjust the register layout to allow for 64bit registers in the
future for nf10bmac(4). Also, add support for and enable RX interrupts.
Allow switching between 32bit and 64bit bus width data access at compile
time by setting NF10BMAC_64BIT and using a REGWTYPE #define to set correct
variable and return value widths.
Adjust comments to indicate the 32 or 64bit register widths.
Relnotes: yes
Sponsored by: DARPA/AFRL
Merge the NFSv4.1 server code in projects/nfsv4.1-server over
into head. The code is not believed to have any effect
on the semantics of non-NFSv4.1 server behaviour.
It is a rather large merge, but I am hoping that there will
not be any regressions for the NFS server.
Add support for VMWare dialect of EXTENDED COPY command, aka VAAI Clone.
This allows to clone VMs and move them between LUNs inside one storage
host without generating extra network traffic to the initiator and back,
and without being limited by network bandwidth.
LUNs participating in copy operation should have UNIQUE NAA or EUI IDs set.
For LUNs without these IDs VMWare will use traditional copy operations.
Beware: the above LUN IDs explicitly set to values non-unique from the VM
cluster point of view may cause data corruption if wrong LUN is addressed!
Sponsored by: iXsystems, Inc.
- Add a very simple virtio_random(4) driver for FreeBSD guests to harvest
entropy from hypervisors.
- Add support to bhyve for the virtio RNG entropy-source device to provide
entry to bhyve guests.
MFV r260708
4427 pid provider rejects probes with valid UTF-8 names
This make use of Solaris' u8_validate() which we happen to
use since r185029 for ZFS.
Use of u8_textprep.c required -Wno-cast-qual for powerpc.
Illumos Revision: 1444d846b126463eb1059a572ff114d51f7562e5
Reference:
https://www.illumos.org/issues/4427
Obtained from: Illumos
2915 DTrace in a zone should see "cpu", "curpsinfo", et al
2916 DTrace in a zone should be able to access fds[]
2917 DTrace in a zone should have limited provider access
4477 DTrace should speak JSON
Add stubs for CTF functions which are not yet implemented.
4474 DTrace Userland CTF Support
4475 DTrace userland Keyword
4476 DTrace tests should be better citizens
4479 pid provider types
4480 dof emulation is missing checks
4471 DTrace count() with histogram
4472 DTrace full width distribution histograms
4473 DTrace frequency trails
Add UUIDs for DragonFlyBSD's partition types.
MFC r267356:
Add DragonFlyBSD's Hammer FS types and type names.
MFC r267357:
Add aliases for DragonFlyBSD's partition types.
MFC r267358:
Allow dumping to DragonFlyBSD's swap partition.
MFC r267359:
Add disklabel64 support to GEOM_PART class.
This partitioning scheme is used in DragonFlyBSD. It is similar to
BSD disklabel, but has the following improvements:
* metadata has own dedicated place and isn't accessible through partitions;
* all offsets are 64-bit;
* supports 16 partitions by default (has reserved place for more);
* has reserved place for backup label (but not yet implemented);
* has UUIDs for partitions and partition types;
MFC r267360:
Add disklabel64 support
Relnotes: yes
Initialize the pbuf counter for directio using SYSINIT.
Mark ffs_rawread.c as requiring both ffs and directio options to be
compiled into the kernel. Add ffs_rawread.c to the list of ufs.ko
module' sources.
This allows to run 32bit applications on a 64bit host. This was tested
successfully with Wine (emulators/i386-wine-devel) and StarCraft II.
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
- Add preliminary support for the Realtek RTL8188EUS and RTL8188ETV chipsets.
- Add device ID for 'Sanoxy 802.11N' USB
- Initialize rssi variable.
- Fix gcc build, initialize off variable.
- The DELAY() should not be used in USB drivers.
- The usb_pause_mtx() function takes ticks and not milliseconds as last argument.
r265194, r265197
r260522:
Add the manual page for geom_uncompress(4).
r260523:
Build the geom_uncompress(4) module by default.
Fix geom_uncompress(4) module loading. Don't link zlib.c (which is a module
itself) directly.
r261439:
Remove some unnecessary code. The offsets read from the first block are
overwritten a few lines bellow.
r261440:
Fix a logic error. Because of this inflateReset() wasn't being called and
the output buffer wasn't being cleared between the inflate() calls,
producing zeroed output after the first inflate() call.
This fixes the read of mkuzip(8) images with geom_uncompress(4).
r261586:
Fix the build with DEBUG enabled. Where possible, fix style(9) issues.
r264504:
Make sure not to do I/O for more than MAXPHYS bytes. Doing so can cause
problems in our providers, such as a KASSERT in md(4). We can initiate
I/O for more than MAXPHYS bytes if we've been given a BIO for MAXPHYS
bytes, the blocks from which we're reading couldn't be compressed and
we had compression in preceeding blocks resulting in misalignment of
the blocks we're trying to read relative to the sector. We're forced to
round up the I/O length to make it an multiple of the sector size.
When we detect the condition, we'll reduce the block count and perform
a "short" read. In g_uzip_done() we need to consider the original I/O
length and stop early if we're about to deflate a block that we didn't
read. By using bio_completed in the cloned BIO and not bio_length to
check for this, we automatically and gracefully handle short reads that
our providers may be doing on top of the short reads we may initiate
ourselves.
r264769:
Keep geom_uncompress(4) in line with geom_uzip(4), bring in the r264504 fix.
Make sure not to start I/O bigger than MAXPHYS bytes.
r265193:
Some style and whitespace fixes. Reduce the difference between geom_uzip(4)
and geom_uncompress(4). Now, they produce an almost clean diff(1) output.
Remove a duplicated variable from g_uncompress.c and an unnecessary header
from g_uzip.c.
r265194:
Actually the FEATURE() macro is defined on sys/sysctl.h.
r265197:
Fix a leak in g_uzip_taste(). After retrieve all the block offsets from
the uzip image, free the last data read.
r261844, r261845, r261846, r262194, r262522, r262559
r258046:
Fix a typo on a comment in ofw_bus_if.m, the default method will return -1
when a node doesn't exist.
r258047:
Move the KASSERT() check to the point before the increase of number of pins.
r258050:
Fix gpiobus to return BUS_PROBE_GENERIC insted of BUS_PROBE_SPECIFIC (0) so
it can be overriden by its OFW/FDT version.
Give a chance for GPIO devices that implement the device_identify method to
attach.
r259035:
Remove unnecessary includes and an unused softc variable. While here apply
two minor style(9) fixes.
r259036:
Move the GPIOBUS_SET_PINFLAGS(..., ..., pin, GPIO_PIN_OUTPUT) to led(4)
control callback function. This makes gpioled(4) works even if the pin
is accidentally set to an input.
r259037:
Fix the pin value reading on AM335x. Because of the inverted logic it was
always returning '0' for all the reads, even for the outputs. It is now
known to work with gpioiic(4) and gpioled(4).
r261842:
Add an OFW GPIO compatible bus. This allows the use of the DTS files to
describe GPIO bindings in the system.
Move the GPIOBUS lock macros to gpiobusvar.h as they are now shared between
the OFW and the non OFW versions of GPIO bus.
Export gpiobus_print_pins() so it can also be used on the OFW GPIO bus.
r261843:
Add OFW support to the in tree gpio compatible devices: gpioiic(4) and
gpioled(4).
Tested on RPi and BBB (using the hardware I2C controller and gpioiic(4) for
the I2C tests). It was also verified for regressions on RSPRO (MIPS/ar71xx)
used as reference for a non OFW-based system.
Update the gpioled(4) and gpioiic(4) man pages with some details and
examples about the FDT/OFW support.
Some compatibility details pointed out by imp@ will follow in subsequent
commits.
r261844:
Allow the use of OFW I2C bus together with iicbb(4) on OFW-based systems.
This change makes ofw_iicbus attach to iicbb(4) controllers in addition to
the already supported i2c host bridges (iichb).
On iicbb(4) allow the direct access of the OFW parent node by its children,
so they can be directly attached to iicbb(4) node on the DTS without the
need of describing the i2c bus.
r261845:
Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this
change the gpio children can be described as directly connected to the GPIO
controller without the need of describing the OFW GPIO bus itself on the
DTS file.
With this commit the OFW GPIO bus is fully functional on BBB and RPi.
GPIO controllers which want to use the OFW GPIO bus will need similar
changes.
r261846:
Make the gpioled(4) work out of the box on BBB.
Add gpioled(4) to BEAGLEBONE kernel and add the description of the four
on-board leds of beaglebone-black to its DTS file.
r262194:
Remove an unnecessary header.
r262522:
Fix make depend for iicbus.
r262559:
Inspired by r262522, fix make depend. This fixes the build of gpio modules.
dd mrsas(4) driver from LSI official support of newer MegaRAID SAS
cards. LSI has been maintaining this driver outside of the FreeBSD
tree. It overlaps support of ThunderBolt and Invader cards that mfi(4)
supports. By default mfi(4) will attach to cards. If the tunable:
hw.mfi.mrsas_enable=1
is set then mfi(4) will not probe and attach to these newer cards and
allow mrsas(4) to attach. So by default this driver will not effect
a FreeBSD system unless mfi(4) is removed from the kernel or the
tunable is enabled.
mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices
show up as /dev/daX. mfiutil(8) does not work with mrsas. The FreeBSD
version of MegaCli and StorCli from LSI do work with mrsas. It appears
that StorCli only works with mrsas. MegaCli appears to work with mfi(4)
and mrsas(4).
It would be good to add mfiutil(4) support to mrsas, emulations modes,
kernel logging, device aliases to ease the transition between mfi(4)
and mrsas(4).
Style issues should be resolved by LSI when they get committers approved.
The plan is get this driver in FreeBSD 9.3 to improve HW support.
Thanks to LSI for developing, testing and working with FreeBSD to
make this driver co-exist in FreeBSD. This improves the overall
support of MegaRAID SAS.
Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com>
Sponsored by: LSI
Modify Copyright information and other strings to reflect
Qlogic Corporation's purchase of Broadcom's NetXtreme business.
Added clean option to Makefile
Submitted by:David C Somayajulu (davidcs@freebsd.org) QLogic Corporation
Modify Copyright information to reflect Qlogic Corporation's purchase
of Broadcom's NetXtreme business
Submitted by:David C Somayajulu (davidcs@freebsd.org) QLogic Corporation
This includes r265236, r265237, r265241 and r265261:
------------------------------------------------------------------------
r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
------------------------------------------------------------------------
------------------------------------------------------------------------
r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines
Add the mpr(4) man page to the man4 Makefile.
This should have been included in r265236.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Sponsored by: LSI, Spectra Logic
------------------------------------------------------------------------
------------------------------------------------------------------------
r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines
Use our standard SYNOPSIS wording; perform some cleanup while here.
------------------------------------------------------------------------
------------------------------------------------------------------------
r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines
Add a missing colon.
------------------------------------------------------------------------
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
Add Tx/Rx multiqueue support to vmx(4)
As a prerequisite for multiple queues, the guest must have MSIX enabled.
Unfortunately, to work around device passthrough bugs, FreeBSD disables
MSIX when running as a VMWare guest due to the hw.pci.honor_msi_blacklist
tunable; this tunable must be disabled for multiple queues.
Also included is various minor changes from the projects/vmxnet branch.
MFC r264865
Update the date that was missed in r263259
r260607:
The onyx codec works also as module, so add it.
r260610:
Described in the man page but not implemented. Here it comes,
atomic_swap_32/64. The latter only for powerpc64.
r260934:
Fix the resource information for the i2s-a node on certain G5 PowerMacs.
This is the first step needed to get the snapper codec working on those
machines.
The second step is to enable the corresponding I2S device and its clock.
Tested on machines where the snapper codec was already working, a G4 PowerBook
and a PowerMac9,1 with a Shasta based macio.
The PowerMac7,2/7,3 with a K2 based macio can now also play sound.
259203,259221,259261,259532,259615,259650,259651,259667,259680,259727,
259761,259772,259776,259777,259830,259882,259915,260160,260449,260450,
260688,260888,260953,261269,261547,261551,261552,261553,261585:
Merge the vt(4) driver (newcons) to stable/10.
Approved by: ray
Import USB RNDIS driver to FreeBSD from OpenBSD.
Useful for so-called USB tethering.
- Imported code from OpenBSD
- Adapted code to FreeBSD
- Removed some unused functions
- Fixed some buffer encoding and decoding issues
- Optimised data transport path a bit, by sending multiple packets at a time
- Increased receive buffer to 16K
Add IDs for the ASIX 88179 and 88178A USB to GigE adapters.
MFC r258331:
Import the axge(4) driver for the ASIX AX88178A and AX88179 USB Ethernet
adapters. Both devices support Gigabit Ethernet and USB 2.0, and the AX88179
supports USB 3.0.
MFC r258617 (by lwhsu):
Also note to add xhci(4) to kernel configuration to utilize USB 3.0
MFC r258618 (by lwhsu):
Mention axge(4)
Note: in head KDTRACE_HOOKS is defined in opt_global.h and thus there is
no need to explicitly include any header to check that option.
In this branch we have to include opt_kdtrace.h and, so, this commit
carries additional changes to accomodate for that difference.
Sponsored by: HybridCluster
