Add support for ARC-1886, NVMe/SAS/SATA controller.
Many thanks to Areca for continuing to support FreeBSD.
Submitted by: 黃清隆 <ching2048 areca com tw>
MFC after: 2 weeks
This permits requests (netipsec ESP and AH protocol) to provide the
IPsec ESN (Extended Sequence Numbers) in a separate buffer.
As with separate output buffer and separate AAD buffer not all drivers
support this feature. Consumer must request use of this feature via new
session flag.
Submitted by: Grzegorz Jaszczyk <jaz@semihalf.com>
Patryk Duda <pdk@semihalf.com>
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D24838
Obtained from: Semihalf
Sponsored by: Stormshield
It is lightweight way to check if an IPv4 address exists.
Submitted by: Roy Marples
Reviewed by: gnn, melifaro
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26636
arm64 has a similar wrapper. This permits defining <machine/fpu.h> as
the standard header for fpu_kern_*.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26753
- whitespace at end of input line
- skipping paragraph macro: Pp at the end of Sh
- new sentence, new line
- consider using OS macro: Fx
- AUTHORS section without An macro
- skipping paragraph macro: Pp before Ss
These kind of drops come for free in the sense that they do not use the
filter TCAM or any other resource that wouldn't normally be used during
rx. Frames dropped by the hardware get counted in the MAC's rx stats
but are not delivered to the driver.
hw.cxgbe.attack_filter
Set to 1 to enable the "attack filter". Default is 0. The attack
filter will drop an incoming frame if any of these conditions is true:
src ip/ip6 == dst ip/ip6; tcp and src/dst ip is not unicast; src/dst ip
is loopback (127.x.y.z); src ip6 is not unicast; src/dst ip6 is loopback
(::1/128) or unspecified (::/128); tcp and src/dst ip6 is mcast
(ff00::/8).
hw.cxgbe.drop_ip_fragments
Set to 1 to drop all incoming IP fragments. Default is 0. Note that
this drops valid frames.
hw.cxgbe.drop_pkts_with_l2_errors
Set to 1 to drop incoming frames with Layer 2 length or checksum errors.
Default is 1.
hw.cxgbe.drop_pkts_with_l3_errors
Set to 1 to drop incoming frames with IP version, length, or checksum
errors. Default is 0.
hw.cxgbe.drop_pkts_with_l4_errors
Set to 1 to drop incoming frames with Layer 4 length, checksum, or other
errors. Default is 0.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
- Extend the list of main libraries of section 3
- Extend the library functions that are included in the libc
MFC after: 2 weeks
Submitted by: Naga Chaitanya Vellanki <pnagato at protonmail dot com>
Approved by: gbe
Differential Revision: https://reviews.freebsd.org/D26476
This is a simple subsystem that allow drivers to register as a backlight.
Each backlight creates a device node under /dev/backlight/backlightX and
an alias based on the name provided.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26250
For interfaces that do not support SIOCGIFMEDIA (for which there are
quite a few) the only fallback is to query the interface for
if_data->ifi_link_state. While it's possible to get at if_data for an
interface via getifaddrs(3) or sysctl, both are heavy weight mechanisms.
SIOCGIFDATA is a simple ioctl to retrieve this fast with very little
resource use in comparison. This implementation mirrors that of other
similar ioctls in FreeBSD.
Submitted by: Roy Marples <roy@marples.name>
Reviewed by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26538
Document the new powerpc64le arch's initial specifications.
Certain things are subject to change while this is experimental. The most
likely change is that long double may switch to quad, dependent on POWER8
emulation assistance for __float128 being set up in the compiler (as
POWER8 does not have IEEE-compatible 128-bit hardware float, unlike POWER9.)
Sponsored by: Tag1 Consulting, Inc.
Document the calls to send messages to userland via devctl.
devctl_notify will create a message for the specified system,
subsystem and type, optionally adding additional information.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D26520
Belatedly document the quoting requirements for the devctl protocol. I
thought they'd been previously documented.
Also, while I'm here, make igor happy.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D26520
This routine centralizes the knowledge needed for properly quoting
'value' in all key="value" items that appear in devctl messages.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D26520
This allows the PF interfaces to communicate with the VF interfaces over
the internal switch in the ASIC. Fix the GL limits for VM work requests
while here.
MFC after: 3 days
Sponsored by: Chelsio Communications
An upcoming patch to use the bitset macros for tracking vm page
dump information could conceivably need more than INT_MAX bits.
Expand the bit type to long so that the extra range is available
on 64-bit platforms where it would most likely be needed.
CPUSET_COUNT and DOMAINSET_COUNT are also modified to remain of
type `int`.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26190
This adds the getenv_bool() function, to parse a boolean value from a
kernel environment variable or tunable. This works for traditional
boolean values like "0" and "1", and also "true" and "false"
(case-insensitive). These semantics do not yet apply to sysctls declared
using SYSCTL_BOOL with CTLFLAG_TUN (they still only parse 1 and 0).
Also added are two wrapper functions, getenv_is_true() and
getenv_is_false(). These are slightly simpler for callers wishing to
perform a single check of a configuration variable.
Reviewed by: jhb (slightly earlier version)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26270
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
One problem with the bus_space_read_N() and bus_space_write_N() family of
functions is that they provide no protection against exceptions which can
occur when no physical hardware or device responds to the read or write
cycles. In such a situation, the system typically would panic due to a
kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N() family
of functions provide a mechanism to handle these exceptions gracefully
without the risk of crashing the system.
Typical example is access to PCI(e) configuration space in bus enumeration
function on badly implemented PCI(e) root complexes (RK3399 or Neoverse
N1 N1SDP and/or access to PCI(e) register when device is in deep sleep state.
This commit adds a real implementation for arm64 only. The remaining
architectures have bus_space_peek()/bus_space_poke() emulated by using
bus_space_read()/bus_space_write() (without exception handling).
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25371
Hardware assistance includes checksumming (tx and rx), TSO, and RSS on
the inner traffic in a VXLAN tunnel.
Relnotes: Yes
Sponsored by: Chelsio Communications
This lets a VXLAN pseudo-interface take advantage of hardware checksumming (tx
and rx), TSO, and RSS if the NIC is capable of performing these operations on
inner VXLAN traffic.
A VXLAN interface inherits the capabilities of its vxlandev interface if one is
specified or of the interface that hosts the vxlanlocal address. If other
interfaces will carry traffic for that VXLAN then they must have the same
hardware capabilities.
On transmit, if_vxlan verifies that the outbound interface has the required
capabilities and then translates the CSUM_ flags to their inner equivalents.
This tells the hardware ifnet that it needs to operate on the inner frame and
not the outer VXLAN headers.
An event is generated when a VXLAN ifnet starts. This allows hardware drivers to
configure their devices to expect VXLAN traffic on the specified incoming port.
On receive, the hardware does RSS and checksum verification on the inner frame.
if_vxlan now does a direct netisr dispatch to take full advantage of RSS. It is
not very clear why it didn't do this already.
Future work:
Rx: it should be possible to avoid the first trip up the protocol stack to get
the frame to if_vxlan just so it can decapsulate and requeue for a second trip
up the stack. The hardware NIC driver could directly call an if_vxlan receive
routine for VXLAN traffic instead.
Rx: LRO. depends on what happens with the previous item. There will have to to
be a mechanism to indicate that it's time for if_vxlan to flush its LRO state.
Reviewed by: kib@
Relnotes: Yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25873
In D12421, the ability to compile stand/ in little-endian was added, with the
intention to extend loader.kboot to run in Petitboot.
However, no further work was done, as the kernel then gained self-execution
capabilities as Petitboot was taught to load FreeBSD kernels directly.
The FreeBSD installer on powerpc64 (on POWER8 and POWER9) uses
/boot/etc/kboot.conf instead of loader.
As this option does nothing but cause stand/ to be miscompiled and actively
causes confusion, remove it.
(I have a functioning petitboot loader in my local tree, however, it turned
out to be quite inconvient to use due to the current petitboot plugin design
so I put it on hold.)
Reviewed by: emaste, imp, jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26430
Submitted by: Ka Ho Ng <khng300@gmail.com>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26372
When cache precedes files, and nscd is configured to allow negative caching,
commands like "pw groupadd" can fail. The sequence of events looks like:
1. A command like pkg(8) looks up the group, and finds it absent.
2. pkg invokes pw(8) to add the group
3. pkg queries the group, but nscd says it doesn't exist, since it has a
negative cache entry for that group.
See also: https://lists.freebsd.org/pipermail/freebsd-current/2012-January/031595.html
Reviewed by: bcr (manpages)
MFC after: 1 week
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D26184
For historical reasons, defining MALLOC_PRODUCTION in /etc/make.conf has
been used to turn off potentially expensive debug checks and statistics
gathering in the implementation of malloc(3).
It seems more consistent to turn this into a regular src.conf(5) option,
e.g. WITH_MALLOC_PRODUCTION / WITHOUT_MALLOC_PRODUCTION. This can then
be toggled similar to any other source build option, and turned on or
off by default for e.g. stable branches.
Reviewed by: imp, #manpages
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26337
hints data. Control register 2 holds the settings a user might want to
configure, such as the timeout value for idle busses and whether to enable
the mass-writes feature.
Also add hint support for disconnecting idle busses (which was already
supported using FDT data).
Update the manpage with the new features, and also split the hints section
into separate lists of required and optional hints.
This allows privileged userspace processes to find information about the
physical page backing a given mapping. It is useful in applications
such as DPDK which perform some of their own memory management.
Reviewed by: kib, jhb (previous version)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D26237
It's no longer unusual to be able to build a release with a single
command, so drop "actually" that hints at a surprise. Also just use
"network install directory" instead of referencing FTP; it's more
likely to be HTTP now.
Reviewed by: gjb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26260
Add deprecation notice for apm bios, aka the apm(4) device. The apm(8)
command will remain, at least for a while, since ACPI emulates the apm
ioctl interface.
Discussed on: arch@
Relnotes: yes
MFC After: 3 days
In Linux, ksize() gets the actual amount of memory allocated for a given
object. This commit adds malloc_usable_size() to FreeBSD KPI which does
the same. It also maps LinuxKPI ksize() to newly created function.
ksize() function is used by drm-kmod.
Reviewed by: hselasky, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26215
sbuf_setpos can only be used to truncate the buffer, never to make it
longer. Update the documentation to reflect this.
Reviewed By: allanjude, phk
Differential Revision: https://reviews.freebsd.org/D26198
crypto(9) functions can now be used on buffers composed of an array of
vm_page_t structures, such as those stored in an unmapped struct bio. It
requires the running to kernel to support the direct memory map, so not all
architectures can use it.
Reviewed by: markj, kib, jhb, mjg, mat, bcr (manpages)
MFC after: 1 week
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25671
It was a driver for a USB FM tuner that was available in the market in 2002. I
wrote the driver in 2003. I've not used it since 2005 or so, so it's time to
retire this driver. No userland code ever interfaced to the special device it
created. There's no user base: the last bug I received on this driver was in
2004.
Relnotes: Yes
This was discussed in arch@ a while ago. Most of the 16-bit drivers that it
relied on have been removed. There's only a few other drivers remaining that
support it, and those are very rare the days (even the once ubiquitious wi(1)
is now quite rare).
Indvidual drivers will be handled separately before pccard itself is removed.
Add prng(9) as a replacement for random(9) in the kernel.
There are two major differences from random(9) and random(3):
- General prng(9) APIs (prng32(9), etc) do not guarantee an
implementation or particular sequence; they should not be used for
repeatable simulations.
- However, specific named API families are also exposed (for now: PCG),
and those are expected to be repeatable (when so-guaranteed by the named
algorithm).
Some minor differences from random(3) and earlier random(9):
- PRNG state for the general prng(9) APIs is per-CPU; this eliminates
contention on PRNG state in SMP workloads. Each PCPU generator in an
SMP system produces a unique sequence.
- Better statistical properties than the Park-Miller ("minstd") PRNG
(longer period, uniform distribution in all bits, passes
BigCrush/PractRand analysis).
- Faster than Park-Miller ("minstd") PRNG -- no division is required to
step PCG-family PRNGs.
For now, random(9) becomes a thin shim around prng32(). Eventually I
would like to mechanically switch consumers over to the explicit API.
Reviewed by: kib, markj (previous version both)
Discussed with: markm
Differential Revision: https://reviews.freebsd.org/D25916
The current scheme of calling VOP_GETATTR adds avoidable overhead.
An example with tmpfs doing fstat (ops/s):
before: 7488958
after: 7913833
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D25910
Add IEEE80211_IOC_IC_NAME to query the ic_name field and in ifconfig
to print the parent interface again. This functionality was lost
around r287197. It helps in case of multiple wlan interfaces and
multiple underlying hardware devices to keep track which wlan
interface belongs to which physical device.
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Reviewed by: adrian, Idwer Vollering
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25832
- Add a better introduction to the DESCRIPTION section
- Add a description for MANPATH and POSIXLY_CORRECT
- Asorted improvements for the usage of some macros
PR: 43823
Submitted by: Lyndon Nerenberg <lyndon at orthanc dot ab dot ca>
Reviewed by: 0mp, bcr
Approved by: 0mp, bcr
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25912
These functions were introduced before UMA started ensuring that freed
memory gets placed in domain-local caches. They no longer serve any
purpose since UMA now provides their functionality by default. Remove
them to simplyify the kernel memory allocator interfaces a bit.
Reviewed by: cem, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25937
The constant seems to exists on MacOS X >= 10.8.
Requested by: swills
Reviewed by: allanjude, kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25933
As we are moving away from portsnap,
let's not recommend it in the manual page.
Reviewed by: bcr (manpages), mat (portmgr)
Differential Revision: https://reviews.freebsd.org/D25847
Update the ng_iface documentation and hooks to reflect the fact that the
node currently only supports IPv4 and v6 packets.
Reviewed by: Lutz Donnerhacke
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25862
- In the initial description of si_addr, do not claim that it is
always the faulting instruction.
- For si_addr, document that it is generally set to the PC for
synchronous signals, but that it can be set to the the address of
the faulting memory reference for some signals including SIGSEGV and
SIGBUS. In particular, while SIGSEGV generally sets si_addr to the
faulting memory reference, SIGBUS can vary. On some platforms, some
SIGBUS signals set si_addr to the PC and other SIGBUS signals set
si_addr to the faulting address depending on the specific hardware
exception.
- For si_trapno, synchronous signals should set this to some value.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25777
For purposes of handling hardware error reported via NMIs I need a way to
escape NMI context, being too restrictive to do something significant.
To do it this change introduces new swi_sched() flag SWI_FROMNMI, making
it careful about used KPIs. On platforms allowing IPI sending from NMI
context (x86 for now) it immediately wakes clk_intr_event via new IPI_SWI,
otherwise it works just like SWI_DELAY. To handle the delayed SWIs this
patch calls clk_intr_event on every hardclock() tick.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25754
Currently, force_depend() from rc.subr(8) does not support depending on
scripts outside of /etc/rc.d (like /usr/local/etc/rc.d). The /etc/rc.d path
is hard-coded into force_depend().
MFC after: 1 week
Allow TLS records to be decrypted in the kernel after being received
by a NIC. At a high level this is somewhat similar to software KTLS
for the transmit path except in reverse. Protocols enqueue mbufs
containing encrypted TLS records (or portions of records) into the
tail of a socket buffer and the KTLS layer decrypts those records
before returning them to userland applications. However, there is an
important difference:
- In the transmit case, the socket buffer is always a single "record"
holding a chain of mbufs. Not-yet-encrypted mbufs are marked not
ready (M_NOTREADY) and released to protocols for transmit by marking
mbufs ready once their data is encrypted.
- In the receive case, incoming (encrypted) data appended to the
socket buffer is still a single stream of data from the protocol,
but decrypted TLS records are stored as separate records in the
socket buffer and read individually via recvmsg().
Initially I tried to make this work by marking incoming mbufs as
M_NOTREADY, but there didn't seemed to be a non-gross way to deal with
picking a portion of the mbuf chain and turning it into a new record
in the socket buffer after decrypting the TLS record it contained
(along with prepending a control message). Also, such mbufs would
also need to be "pinned" in some way while they are being decrypted
such that a concurrent sbcut() wouldn't free them out from under the
thread performing decryption.
As such, I settled on the following solution:
- Socket buffers now contain an additional chain of mbufs (sb_mtls,
sb_mtlstail, and sb_tlscc) containing encrypted mbufs appended by
the protocol layer. These mbufs are still marked M_NOTREADY, but
soreceive*() generally don't know about them (except that they will
block waiting for data to be decrypted for a blocking read).
- Each time a new mbuf is appended to this TLS mbuf chain, the socket
buffer peeks at the TLS record header at the head of the chain to
determine the encrypted record's length. If enough data is queued
for the TLS record, the socket is placed on a per-CPU TLS workqueue
(reusing the existing KTLS workqueues and worker threads).
- The worker thread loops over the TLS mbuf chain decrypting records
until it runs out of data. Each record is detached from the TLS
mbuf chain while it is being decrypted to keep the mbufs "pinned".
However, a new sb_dtlscc field tracks the character count of the
detached record and sbcut()/sbdrop() is updated to account for the
detached record. After the record is decrypted, the worker thread
first checks to see if sbcut() dropped the record. If so, it is
freed (can happen when a socket is closed with pending data).
Otherwise, the header and trailer are stripped from the original
mbufs, a control message is created holding the decrypted TLS
header, and the decrypted TLS record is appended to the "normal"
socket buffer chain.
(Side note: the SBCHECK() infrastucture was very useful as I was
able to add assertions there about the TLS chain that caught several
bugs during development.)
Tested by: rmacklem (various versions)
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24628
AVL trees, red-black trees, and others. Weak AVL (wavl) trees are a
recently discovered member of that class. This change replaces
red-black rebalancing with weak AVL rebalancing in the RB tree macros.
Wavl trees sit between AVL and red-black trees in terms of how
strictly balance is enforced. They have the stricter balance of AVL
trees as the tree is built - a wavl tree is an AVL tree until the
first deletion. Once removals start, wavl trees are lazier about
rebalancing than AVL trees, so that removals can be fast, but the
balance of the tree can decay to that of a red-black tree. Subsequent
insertions can push balance back toward the stricter AVL conditions.
Removing a node from a wavl tree never requires more than two
rotations, which is better than either red-black or AVL
trees. Inserting a node into a wavl tree never requires more than two
rotations, which matches red-black and AVL trees. The only
disadvantage of wavl trees to red-black trees is that more insertions
are likely to adjust the tree a bit. That's the cost of keeping the
tree more balanced.
Testing has shown that for the cases where red-black trees do worst,
wavl trees better balance leads to faster lookups, so that if lookups
outnumber insertions by a nontrivial amount, lookup time saved exceeds
the extra cost of balancing.
Reviewed by: alc, gbe, markj
Tested by: pho
Discussed with: emaste
Differential Revision: https://reviews.freebsd.org/D25480
Document that iwm(4) currently doesn't support 802.11n and 802.11ac.
PR: 247874
Submitted by: Charles Ross <cwr at sdf dot org>
Reviewed by: brueffer, markj
Approved by: brueffer
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25666
These routines are similar to crypto_getreq() and crypto_freereq() but
operate on caller-supplied storage instead of allocating crypto
requests from a UMA zone.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25691
initializations.
Relax some overly perscriptive rules against declarations: they may be at the
start of any blocks, even if things aren't super complicated. Allow more
initializations (those that call simple functions, like accessor functions for
newbus are fine). Allow the common idiom of declaring the loop variable in a for
loop.
This tries to codify what common exceptions are today, as well as give
some guidance on when it's best to do these things.
Reviewed by: tsoome, kp, markm, allanjude, jiles, cem, rpokala
(earlier versions: seanc, melifaro, bapt, pjd, bz, pstef, arichards,
jhibits, vangyzen, jmallet, ian, glebius, jhb, dab, adrian,
sef, gnn)
Differential Revision: https://reviews.freebsd.org/D25312
Note: date not bumped because "content" was not changed, just inserted some
missing words.
PR: 248001
Submitted by: Jose Luis Duran <jlduran@gmail.com>
MFC after: 2 weeks
Sponsored by: Klara Inc.
The EIP-97 is a packet processing module found on the ESPRESSObin. This
commit adds a crypto(9) driver for the crypto and hash engine in this
device. An initial skeleton driver that could attach and submit
requests was written by loos and others at Netgate, and the driver was
finished by me.
Support for separate AAD and output buffers will be added in a separate
commit, to simplify merging to stable/12 (where those features don't
exist).
Reviewed by: gnn, jhb
Feedback from: andrew, cem, manu
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25417
Optionally, alert you if the contents change from the previous backup
PR: 86388
Submitted by: Rob Fairbanks <rob.fx907@gmail.com>, Miroslav Lachman <000.fbsd@quip.cz> (Original Version)
MFC after: 4 weeks
Relnotes: yes
Sponsored by: Klara Inc.
Event: July 2020 Bugathon
Differential Revision: https://reviews.freebsd.org/D25628
With this change, a kernel compiled with "options SCTP_SUPPORT" and
without "options SCTP" supports dynamic loading of the SCTP stack.
Currently sctp.ko cannot be unloaded since some prerequisite teardown
logic is not yet implemented. Attempts to unload the module will return
EOPNOTSUPP.
Discussed with: tuexen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21997
This fixes Linux gettyname(3), with caveats (see PR).
PR: kern/240767
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25558
dumpon has accepted device names without the prefix ever since r291207.
Since dumpon and savecore are always paired, they ought to accept the same
arguments. Prior to this change, specifying 'dumpdev="da3"' in
/etc/rc.conf, for example, would result in dumpon working just fine but
savecore complaining that "Dump device does not exist".
PR: 247618
Reviewed by: cem, bcr
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25500
Expand the mentioned RFC in the SEE ALSO section
and reference RFC1701 and RFC1702.
PR: 240250
Reviewed by: bcr (mentor)
Approved by: bcr (mentor)
Obtained from: OpenBSD
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D25504
