283 Commits

Author SHA1 Message Date
dg
e2c7743762 Update swap and dump stuff to match reality:
- option DODUMP no longer exists (remove all references to it).
- directive `swap on' is now a no-op (don't bother documenting it; remove
  comment to match code).
- directive `dumps on' still works (restore code to match comment; deprecate
  it in comment).

Reviewed by:	Poul-Henning Kamp, and me
Submitted by:	Bruce Evans
1995-05-27 04:32:12 +00:00
dg
78d20e0752 Added "BROKEN_KEYBOARD_RESET" option to disable using the keyboard reset
in cpu_reset(). Some MBs don't deal with this properly.

Submitted by:	Rod Grimes
1995-05-18 09:17:07 +00:00
dg
b649d7b9c7 Changed swap partition handling/allocation so that it doesn't
require specific partitions be mentioned in the kernel config
file ("swap on foo" is now obsolete).

From Poul-Henning:

The visible effect is this:

As default, unless
        options "NSWAPDEV=23"
is in your config, you will have four swap-devices.
You can swapon(2) any block device you feel like, it doesn't have
to be in the kernel config.

There is a performance/resource win available by getting the NSWAPDEV right
(but only if you have just one swap-device ??), but using that as default
would be too restrictive.

The invisible effect is that:

Swap-handling disappears from the $arch part of the kernel.
It gets a lot simpler (-145 lines) and cleaner.

Reviewed by:	John Dyson, David Greenman
Submitted by:	Poul-Henning Kamp, with minor changes by me.
1995-05-14 03:00:10 +00:00
ache
9af7504286 Add 'rc' line 1995-05-12 15:17:55 +00:00
jkh
f622ff4fe5 Remove all vestiges of the ALLOW_CONFLICT_FOO evil and replace it with
something slightly less evil - a per device conflict flag.
1995-05-11 02:15:55 +00:00
joerg
09a74d468d Restructured the floppy tape probe.
The ``flags 1'' in the fdc line is now only needed for owners of an
Insight tape (perhaps there aren't any?  Mine is disfunctional).  All
other probes are safe wrt. to the motor-control line of floppy disk
drives.  Document the flag in LINT finally.
1995-05-06 19:34:28 +00:00
dg
fa72d1206b Fix spelling error. Commented out ISO and ISO related things until I
either fix it or we decide to remove it. It requires implementing PCB
hashing to get it to compile and likely a lot more to get it to work..
1995-05-05 07:47:44 +00:00
dufault
6702bdcc1b Add National Instruments "LabPC" driver 1995-04-28 00:51:40 +00:00
phk
5c63e83231 Document MFS_ROOT option. 1995-04-25 03:44:04 +00:00
phk
28d3577e2f Added "bio" to matcd. 1995-04-24 05:33:59 +00:00
dyson
7d9a28320b Removed the NSECS_MULTI option, and implemented both 32 bit probe
enable and multi-sector I/O enable by using the controller or device
flags capability.  Per a suggestion by phk.
1995-04-24 04:30:19 +00:00
wollman
cd11f8b168 Substantially clean up LINT and add `fe'. 1995-04-23 18:30:27 +00:00
dyson
50e9985ad4 Document the wd.c option NSECS_MULTI. 1995-04-22 22:39:33 +00:00
ache
d1cec92227 Add quotes around TUNE_1542 1995-04-18 11:02:22 +00:00
dufault
e6d068ab0b Add "sctarg" and document new SCSI_REPORT_GEOMETRY option for ache 1995-04-14 15:12:24 +00:00
phk
30e53f439b Add "BREAK_TO_DEBUGGER" option. 1995-04-12 22:02:51 +00:00
phk
64c299d6a9 Move default address of lnc0 to 0x300. Luigi Rizzo said that his card
cannot even go below 0x300...
1995-04-08 21:41:52 +00:00
ache
7ed7f2756d pca: change IO_PPI to IO_TIMER1 due to syscons conflict 1995-04-08 16:08:35 +00:00
joerg
2aef2c3165 Update pcvt to 3.20 b24 1995-04-08 15:49:25 +00:00
phk
724e4f8790 Added the "eg0" interface driver for the 3Com "3c505" or "etherlink/+"
card.  This is the braindamaged card with the 80186 CPU on it.  It is
slow, probably not very good after all, but hey, if you have one lying
around doing nothing anyway...

Added the "zp0" driver to GENERIC.
1995-04-08 09:36:04 +00:00
ache
098a54ed40 Add port IO_PPI for pca per Bruce suggestion 1995-04-06 14:01:20 +00:00
jkh
86e424aef2 0x330 is the default address for SB Midi, not 0x300
Submitted by:	Doug Rabson <dfr@render.com>
1995-04-06 03:22:12 +00:00
rgrimes
dbfd5a0f57 Submitted by: Mahesh Neelakanta <mahesh@gcomm.com>
Change I/O address of Intel EtherExpress driver (ix0) from 0x280 to
0x300.
1995-03-30 00:20:08 +00:00
dg
3fbe5d82ea Added NQNFS option and a comment warning about it's overhead. 1995-03-29 05:14:22 +00:00
jkh
3fc004e929 Change ahc driver comment to note that it's not just the 274x controller
it supports.
1995-03-28 08:14:55 +00:00
rgrimes
157d75c19a Add Intel EtherExpress16 (ix0) driver.
Reviewed by:
Submitted by:
Obtained from:
1995-03-18 08:12:48 +00:00
dufault
0c96fcbafe Document scsi options 1995-03-15 14:27:01 +00:00
dg
68d73d5130 Added support for generic FDDI and the DEC DEFEA and DEFPA FDDI adapters.
Submitted by:	Matt Thomas
1995-03-14 09:16:07 +00:00
swallace
d3b9df0ced Change device entry examples to reflect the following:
Remove PAS-only entry for OPL as ache pointed out.
Update OPL comment to show OPL-2 or OPL-3 support as it is auto-detected.
1995-03-13 18:49:37 +00:00
swallace
d3db38add4 Remove old snd file configuration list and add new file list
for the snd controller and the different sound devices.

Update LINT to include all sound device drivers using new format.

Reviewed by:	wollman
1995-03-12 23:43:15 +00:00
bde
d26caae19b Fix config-time syntax errors in sound options. 1995-03-12 12:18:43 +00:00
ugen
dbb6d219cb Restore IPACCT out there.. 1995-03-06 10:33:34 +00:00
joerg
aad435dabc pcvt is still using the XSERVER option; document this. 1995-03-05 22:23:35 +00:00
jkh
fb37701122 Upgrade the sound drivers to VoxWare pre-3.0 and fix a number of bugs.
Make the sound configuration a little neater
	(see /sys/i386/isa/sound/Readme.freebsd)
Add support for the Microsoft Sound Source.
Document the sound options again.
Submitted by:	Sujal Patel <smpatel@wam.umd.edu>
Obtained from:	Voxware
1995-03-04 21:11:21 +00:00
jkh
210fe3dddd Changes to incorporate the Matsushita CDROM driver (otherwise known as
the "Sound blaster CDROM").
Submitted by:	Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-03-02 04:07:03 +00:00
dufault
ee28b29ea8 Added a little documentation on the fixed SCSI config and
fixed a few quirks that snuck in.
1995-03-01 22:27:45 +00:00
bde
b52ab728d0 Make diskslice files standard and remove option DISKSLICE. ufs_disksubr.c
needed a diskslice function yesterday and all disk drivers will need it.
The diskslice initialization routine should be configurable (but isn't).
1995-02-23 17:19:54 +00:00
jkh
46a9bdb15f Remove the SCSI idsn line - it's permanantly dead. 1995-02-19 14:07:28 +00:00
jkh
8329459c37 Remove the ISDN dialer from LINT until it's working. 1995-02-17 09:33:29 +00:00
phk
07489c563c This is the latest version of the APM stuff from HOSOKAWA, I have looked
briefly over it, and see some serious architectural issues in this stuff.

On the other hand, I doubt that we will have any solution to these issues
before 2.1, so we might as well leave this in.

Most of the stuff is bracketed by #ifdef's so it shouldn't matter too much
in the normal case.

Reviewed by:	phk
Submitted by:	HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
1995-02-17 02:22:57 +00:00
jkh
b6fed9e68a We can enable pcd0 when we actually have one. 1995-02-15 06:18:15 +00:00
jkh
73ffdb981c Comment out snic0 until it gets updated to the newer scsi code. 1995-02-15 04:49:18 +00:00
jkh
f4705baefc Add ISDN entries to LINT. 1995-02-15 00:53:15 +00:00
ugen
1cf892686a pseudo-device snp 3
Example entry for snoop.
1995-02-14 21:15:12 +00:00
jkh
86d0c26995 Pick a more sensible default for # of ptys, add comment that this can
go as high as 64 now.
1995-02-12 09:29:59 +00:00
amurai
9e67759149 Delete a redundant line - "options TUN" and Add explanation for
"pseudo-device tun" as same as other device.
1995-02-10 05:42:24 +00:00
jkh
e0092e86d6 Add the Cyclades serial driver code (ALPHA) from Andrew Werple and
adapted to FreeBSD by Heikki Suonsivu <hsu@cs.hut.fi>.
Submitted by:	Andrew Werple <andrew@werple.apana.org.au> and
		Heikki Suonsivu <hsu@cs.hut.fi>
Obtained from:	NetBSD
1995-02-09 09:47:31 +00:00
jkh
630cf84ab0 The very minimum driver required to support a Video Spigot. See the
copyright notices in the code for information on where to go to pick
up additional useful bits.
Submitted by:	Jim Lowe <james@blatz.cs.uwm.edu>
1995-02-06 23:19:49 +00:00
jkh
f2a7d967ea Bring PCVT's config files into the tree.
Submitted by:	mh
1995-02-05 10:56:47 +00:00
amurai
ac12d39d2e Add Tunnel device for ppp (iijppp) 1995-01-31 06:33:58 +00:00