Driver was modified to ensure it attaches properly to "marvell,orion-ehci"
node, which doesn't have error interrupt line defined. Neccessary
ofw_compat_data struct was added and probe procedure was altered.
Reviewed by: andrew, ian
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4369
uart_dev_ns8250 now relies on compatible property instead of additional
'busy-detect' cell. All drivers with compatible = "snps,dw-apb-uart" have
busy detection turned on. DTS files of devices affected by the change
were modified and 'busy-detect' property was removed.
Reviewed by: andrew, ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4218
This compatibility string is used in .dts file of Armada38x
and isrequired for driver attachment.
Reviewed by: andrew, ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4216
Strict compatibility requirement is a root of problems when simplebus'
node has two compatibility strings (i.e. on Armada38x). Removing this
requirement should not interfere with other platforms.
fdt_is_compatible_strict() and fdt_find_compatible() calls were changed
in fdt_common.c and mv_common.c.
Reviewed by: ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4602
New annotation coming into use in the common code. Support its use by
adding null macro definitions for non-Windows platforms.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
X-MFC with: r293901
to actually wait until the TX FIFOs of UARTs have be drained before
returning. This is done by bringing the equivalent of the TS_BUSY flag
found in the previous implementation back in an ABI-preserving way.
Reported and tested by: Patrick Powell
Most likely, drivers for USB-serial-adapters likewise incorporating
TX FIFOs as well as other terminal devices that buffer output in some
form should also provide implementations of tsw_busy.
MFC after: 3 days
- Add optimizing LRO wrapper which pre-sorts all incoming packets
according to the hash type and flowid. This prevents exhaustion of
the LRO entries due to too many connections at the same time.
Testing using a larger number of higher bandwidth TCP connections
showed that the incoming ACK packet aggregation rate increased from
~1.3:1 to almost 3:1. Another test showed that for a number of TCP
connections greater than 16 per hardware receive ring, where 8 TCP
connections was the LRO active entry limit, there was a significant
improvement in throughput due to being able to fully aggregate more
than 8 TCP stream. For very few very high bandwidth TCP streams, the
optimizing LRO wrapper will add CPU usage instead of reducing CPU
usage. This is expected. Network drivers which want to use the
optimizing LRO wrapper needs to call "tcp_lro_queue_mbuf()" instead
of "tcp_lro_rx()" and "tcp_lro_flush_all()" instead of
"tcp_lro_flush()". Further the LRO control structure must be
initialized using "tcp_lro_init_args()" passing a non-zero number
into the "lro_mbufs" argument.
- Make LRO statistics 64-bit. Previously 32-bit integers were used for
statistics which can be prone to wrap-around. Fix this while at it
and update all SYSCTL's which expose LRO statistics.
- Ensure all data is freed when destroying a LRO control structures,
especially leftover LRO entries.
- Reduce number of memory allocations needed when setting up a LRO
control structure by precomputing the total amount of memory needed.
- Add own memory allocation counter for LRO.
- Bump the FreeBSD version to force recompilation of all KLDs due to
change of the LRO control structure size.
Sponsored by: Mellanox Technologies
Reviewed by: gallatin, sbruno, rrs, gnn, transport
Tested by: Netflix
Differential Revision: https://reviews.freebsd.org/D4914
after changing the HW LRO sysctl when previously in up state.
Reviewed by: gnn
Sponsored by: Mellanox Technologies
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D4941
Ensure that checksum flags and L3/L4 fields are ignored
if lower level errors are reported in the event.
Remove checks for CRC0_ERR (bad iSCSI header CRC) and
CRC1_ERR (bad iSCSI payload or FCoE/FCoIP CRC) as they
are not used by any existing code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4975
The dynamic config on Medford is stored using two partitions in flash, and at
any time one is the 'current' partition, used to provide the active config,
and the other 'backup' partition is used for writes. This means that there
are two potential partitions that can be used to service reads, and which is
required can depend on, for example, whether the read is to get the current
contents or to verify a write.
When the partition write lock is held, the default behaviour is to read from
the backup partition, which was wrong for most reads in the common code which
require the current partition. This change allows the current partition to be
read whilst the write lock is held.
There is one read in Manftest which needs the backup partition.
ef10_nvram_partn_read_mode() is created to avoid changing
ef10_nvram_partn_read() which shares a prototype with the equivalent Falcon
and Siena methods.
MC_CMD_NVRAM_READ_IN_V2 adds an extra field, but firmware which doesn't support
it just ignores it.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4974
on FDT/OFW platforms.
After the refactoring of the powerpc code so that OF_decode_addr() is usable
on all FDT/OFW platforms, this switches uart(4) to using it.
Differential Revision: https://reviews.freebsd.org/D4675
tlv_partition_header has field *preset* to support RFID-selectable
segments of dynamic configuration
Submitted by: Mateusz Wrzesinski <mwrzesinski at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
This allows an MTU change to be requested on unpriviliged functions
without also setting all the other parameters supported by MC_CMD_SET_MAC.
The enhanced SET_MAC command was introduced in v4_7 firmware.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4958
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4961
we want to use it.
The rate table was being initialised in low->high, but the link quality
table was being initialised high->low. So, when we did a lookup, we
would get the indexes wrong.
This started by a patch from dragonflybsd which reversed how the ni->in_ridx[]
array is being used; I'd rather it all be consistent. So, this is consistent.
Inspired by: what I did to iwn(4) a while ago
Inspired by: DragonflyBSD; <imre@vdsz.com>
Previously the polarity was for TTL levels, which are the reverse of RS-232.
Also add handling of the UART_PPS_INVERT_PULSE option bit in the sysctl
value, the same as was recently added to uart(4), so that people using TTL
level connections can request a logical inverting of the signal.
Use the named constants from the new dev/uart/uart_ppstypes.h for the pps
capture modes and option bits.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4957
- Add the structure with already known fields offsets
(some of them were taken from this driver,
some (channel_plan, rf_* fields) - from TP-LINK official driver)
- Fix a typo / dehardcode a constant in RTL8192C ROM structure.
Tested with RTL8188EU, STA mode
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4274
Leaving BIST methods for now as, though the Medford bootrom now has lots
of BIST support, production firmware doesn't appear to have been updated
yet.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4949
Not per PF copies as on Huntington.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4935
Some classes of IOAT hardware prefetch reads. DMA operations that
depend on the result of prior DMA operations must use the DMA_FENCE flag
to prevent stale reads.
(E.g., I've hit this personally on Broadwell-EP. The Broadwell-DE has a
different IOAT unit that is documented to not pipeline DMA operations.)
Sponsored by: EMC / Isilon Storage Division
The "mcdi_err_arg" probe still reports results of failed MCDI
commands, unless the caller invoked efx_mcdi_execute_quiet().
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4919
Add support for Huntington MCDI licensing interface to common code.
Ported from Linux net driver IOCTL functions with restructuring for
initial support for V3 licensing API.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4918
Fix an explanatory comment which did not explain very well.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4916
Fix efx_vpd_hunk_next() which has -- since its inception -- failed to
correctly iterate over the tags and keywords contained in the VPD data.
Only the first tag or keyword would be returned and the next call with
*contp == 1 would walk to the end of the data and finish.
This was spotted when fixing up errors spotted by Prefast code analysis
(which neglected to set all of the out parameters in all successful cases)
Also fix efx_vpd_verify() on Siena and EF10 which (as a side effect of
correctly iterating over all the tags and keywords) was failing as it
detected that both the static VPD and dynamic VPD storage contained an
RV keyword in the VPD-R tag. This is intentional as the static VPD and
dynamic VPD are stored separately (firmware merges their contents and
computes a new RV keyword checksum for the data readable from the VPD
capability in PCIe configuration space).
Submitted by: Andrew Lee <alee at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4915
