To save SMART data and for a drive to understand that it's been nicely
shutdown, we need to send a STANDBY IMMEDIATE. Modify adaspindown to
use a local CCB on the stack. When we're panicing, used
xpt_polled_action rather than cam_periph_runccb so that we can SEND
IMMEDIATE after we've shutdown the scheduler.
Sponsored by: Netflix
Reviewed by: scottl@, gallatin@
Differential Revision: https://reviews.freebsd.org/D12799
When limiting I/O, a value of 0 makes no sense as a limit. No progress
can be made. Trade the possibility that someone might be doing
something clever to achieve ultra-low I/O limits vs the damage of not
ever making progress on an I/O in favor of making progress. Now the
machine won't be useless if this accidentally gets requested.
Sponsored by: Netflix
allocations (for req and ccb, which ultimately contain the
nvme_cmd). As such, we can micro-optimize these routines. Add a
comment to this effect, and bzero the ccb used to make the requests
for the nda dump rotuine so it more closely matches a ccb allocated
with xpt_get_ccb().
Sponsored by: Netflix
Prevent cam_iosched_iops_tick() from discarding 'unspent' ios unless
it's a new accounting interval.
Previously ios that weren't used between ticks were lost, as a result
the iops limiter could enforce a limit below the configured maximum.
Obtained from: ElectroBSD
Submitted by: Fabian Keil
PR: 221974
Previously the iops limiter would always allow at least
quanta ios per second as cam_iosched_iops_tick() never set
ios->l_value1 below 1.
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
PR: 221974
Previously ios->current was set to 0 until the first
cam_iosched_cl_maybe_steer() call.
PR: 221954
Obtained from: ElectroBSD
Submitted by: Fabian Keil
Differential Revision: https://reviews.freebsd.org/D12349
Previously callout_reset() was called with a "ticks" value that was
off by one. As a result cam_iosched_ticker() was called a bit too
frequently: On systems with hz=1000 a quanta value of 200 resulted in
~250 calls and a value of 100 in ~111 calls.
For the "queue_depth" and "bandwidth" limiters the difference doesn't
matter but the "iops" limiter depends on the scheduling to enforce the
correct maximum.
PR: 221956
Obtained from: ElectroBSD
Submitted by: Fabian Keil
Differential Revision: https://reviews.freebsd.org/D12350
Invalid values can result in devision-by-zero panics or other
undefined behaviour so lets not allow them.
PR: 221957
Obtained from: ElectroBSD
Submitted by: Fabian Keil
Differential Revision: https://reviews.freebsd.org/D12351
Use the write queue for BIO_ZONE commands so they can't get executed
ahead of writes that were sent after them. More generally, since they
introduce strong ordering into the list, they need to go to the write
queue (which is the only queue that BIO_ORDERED is honored for at the
moment). In fact, fix mismatch between queueing and dequeueing code by
changing this to queue all non-reads (and non-trims) to the write
queue.
As a side effect this prevents the kernel message:
kernel: Found bio_cmd = 0x9
which cam_iosched_next_bio() emits when finding commands
other than BIO_READ in the read queue.
PR: 221973
Obtained from: ElectroBSD
Submitted by: Fabian Keil
Differential Revision: https://reviews.freebsd.org/D12353
kern.features.mmcam will be present and equal to 1 if the kernel has been
compiled with option MMCCAM.
This will help sdio-related userland tools to fail-fast if running on the kernel
without MMCCAM enabled.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D12386
Don't call cam_iosched_trim_done or cam_iosched_submit_trim for nda
since its hardware can handle almost an arbitrary number of TRIMs and
we don't have to be careful to only ever do one.
Sponsored by: Netflix
It's intended only for those situations where the periph driver
ones to limit the number of trims active to one and only one.
Also update comments on associated functions.
Sponsored by: Netflix
* Demote the level of several debug messages to CAM_DEBUG_TRACE
* Add detection for SDHC cards that can do 1.8V. No voltage switch sequence
is issued yet;
* Don't create a separate LUN for each SDIO function. We need just one to make
pass(4) attach;
* Remove obsolete mmc_sdio* files. SDIO functionality will be moved into the
separate device that will manage a new sdio(4) bus;
* Terminate probing if got no reply to CMD0;
* Make bcm2835 SDHCI host controller driver compile with 'option MMCCAM'.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D12109
The cam_iosched_ticker() can't be scheduled more than once per tick.
Some limiters depend on quanta matching the number of calls per second
to enforce the proper limits. Limit the quanta to no faster than 1 per
clock tick. This fixes some features when running in VMs where the
default HZ is 100.
PR: 221953
Obtained from: ElectroBSD
Differential Revision: https://reviews.freebsd.org/D12337
Submitted by: Fabian Keil
It's awkward to have spaces in CAM device serial numbers. That leads to
such things as device nodes named "/dev/diskid/MYSERIAL%20%20%201". Better
to replace the spaces with "0"s. This change only affects the default
serial numbers for users who don't provide their own.
Reviewed by: ken, mav
MFC after: Never
Relnotes: Yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12263
When bcopy is treated as memcpy/memmove, Clang produces warnings that the
size argument doesn't match the type of the source. This is true, it
doesn't match; we're aliasing the source.
Explicitly cast the source pointer to the expected type to remove the
warning.
No functional change.
Sponsored by: Dell EMC Isilon
This patch changes the way XPT_GDEV_TYPE works for NVMe. The current
ccb_getdev structure includes pointers to the NVMe Identify Controller
and Namespace structures, but these are kernel virtual addresses which
are not accessible from user space.
As an alternative, the patch changes the pointers into padding in
ccb_getdev and adds two new types to ccb_dev_advinfo to retrieve the
Identify Controller (CDAI_TYPE_NVME_CNTRL) and Namespace
(CDAI_TYPE_NVME_NS) data structures.
Reviewed By: rpokala, imp
Differential Revision: https://reviews.freebsd.org/D10466
Submitted by: Chuck Tuffli
Tuffli had submitted a more thorough patch that I was unaware of when
I did my work and this brings in the bits I missed from that patch.
PR: 220267
Submitted by: Chuck Tuffli
This adds support in pass(4) for data to be described with a
scatter-gather list (sglist) to augment the existing (single) virtual
address.
Differential Revision: https://reviews.freebsd.org/D11361
Submitted by: Chuck Tuffli
Reviewed by: imp@, scottl@, kenm@
extreme outliers from dodgy drives. Adjust comments to reflect this,
and make sure that the number of latency buckets match in the two
places where it matters.
o Allow I/O scheduler to gather times on 32-bit systems. We do this by shifting
the sbintime_t over by 8 bits and truncating to 32-bits. This gives us 8.24
time. This is sufficient both in range (256 seconds is about 128x what current
users need) and precision (60ns easily meets the 1ms smallest bucket size
measurements). 64-bit systems are unchanged. Centralize all the time math so
it's easy to tweak tha range / precision tradeoffs in the future.
o While I'm here, the I/O scheduler should be using periph_data rather than
sim_data since it is operating on behalf of the periph.
Differential Review: https://reviews.freebsd.org/D12119
All ndaX and ndaXpY nodes will appear as nvdX and nvdXpY as well
(through symlinks in devfs via the normal disk aliasing mechanism in
GEOM).
Differential Revision: https://reviews.freebsd.org/D11873
The attached patch lets adaasync() set ADA_STATE_WCACHE based on
ADA_FLAG_CAN_WCACHE instead of ADA_FLAG_CAN_RAHEAD.
This fixes a regression introduced in r300207 which changed
the flag names.
PR: 220948
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
MFC after: 1 week
the IO type (Admin or NVM) using XPT op-codes XPT_NVME_ADMIN or
XPT_NVME_IO.
Submitted by: Chuck Tuffli <chuck@tuffli.net>
Differential Revision: https://reviews.freebsd.org/D10247
Implement the MMC/SD/SDIO protocol within a CAM framework. CAM's
flexible queueing will make it easier to write non-storage drivers
than the legacy stack. SDIO drivers from both the kernel and as
userland daemons are possible, though much of that functionality will
come later.
Some of the CAM integration isn't complete (there are sleeps in the
device probe state machine, for example), but those minor issues can
be improved in-tree more easily than out of tree and shouldn't gate
progress on other fronts. Appologies to reviews if specific items
have been overlooked.
Submitted by: Ilya Bakulin
Reviewed by: emaste, imp, mav, adrian, ian
Differential Review: https://reviews.freebsd.org/D4761
merge with first commit, various compile hacks.
If a peripheral driver (e.g. da, sa, cd) is added or removed from the
peripheral driver list while an unrelated peripheral driver instance (e.g.
da0, sa5, cd2) is going away and is inside camperiphfree(), we could
dereference an invalid pointer.
When peripheral drivers are added or removed (see periphdriver_register()
and periphdriver_unregister()), the peripheral driver array is resized
and existing entries are moved.
Although we hold the topology lock while we traverse the peripheral driver
list, we retain a pointer to the location of the peripheral driver pointer
and then drop the topology lock. So we are still vulnerable to the list
getting moved around while the lock is dropped.
To solve the problem, cache a copy of the peripheral driver pointer. If
its storage location in the list changes while we have the lock dropped, it
won't have any effect.
This doesn't solve the issue that peripheral drivers ("da", "cd", as opposed
to individual instances like "da0", "cd0") are not generally part of a
reference counting scheme to guard against deregistering them while there
are instances active. The caller (generally the person unloading a module)
has to be aware of active drivers and not unload something that is in use.
sys/cam/cam_periph.c:
In camperiphfree(), cache a pointer to the peripheral driver
instance to avoid holding a pointer to an invalid memory location
in the event that the peripheral driver list changes while we have
the topology lock dropped.
PR: kern/219701
Submitted by: avg
MFC after: 3 days
Sponsored by: Spectra Logic
Without the allocation length set, the target will either reject
the command or complete it without transferring any data.
This fixes the REPORT ZONES command for SCSI ZBC protocol devices,
as well as ATA ZAC protocol devices that are behind a SCSI to ATA
translation layer. (LSI/Broadcom's 12Gb SAS adapters translate ZBC
commands to ZAC commands.) Those are Host Aware and Host Managed SMR
drives.
This will fix REPORT ZONE commands sent to the da(4) driver via the
GEOM bio interface and zonectl, and REPORT ZONE commands sent from
camcontrol(8).
Note that in the case of camcontrol(8), we currently only send
SCSI ZBC commands to native SCSI protocol devices, not ATA devices
behind a SAT layer.
sys/cam/scsi/scsi_da.c:
Fill in the length field in scsi_zbc_in().
MFC after: 3 days
Sponsored by: Spectra Logic
