load and unload it all the time since the buffer never changes. In
addition, we were loading it with a hardware spin lock held, which
makes the sleepable lock in busdma (for the bounce pages) trigger a
witness warning, as well as ipend being called with it held by uart,
which made it impossible to unload.
These differences don't matter with the v4 busdma implementation, but
they do with the v6 implementation since the latter likes to bounce
transactions more, and will always do so for Atmel's driver.
It's more efficient as well as being more correct.
timecounter instead of the GPT timer, freeing up the more flexible GPT
hardware for other uses. The EPIT driver is a standard (always in the
kernel) driver, and the existing GPT driver is now optional and included
only if you ask for device imx_gpt.
global timer was successful, since the implementation tries to read it.
Notably, if the platform has a variable-frequency global timer (because
of dynamic frequency scaling), it doesn't set up the global timer for use
as a system timecounter, and in that case it also can't use it for DELAY.
Such platforms use different timer hardware for both timecounter and DELAY.
The arm kernel linker scripts place the .init_pagetable section in .bss,
but .init_pagetable had no section flags set, and so did not match the
expected flags for .bss.
GNU ld silently ignores this case, but lld reports an error:
ld: error: incompatible section flags for .bss
>>> locore.o:(.init_pagetable): 0x0
>>> output section .bss: 0x3
PR: 220055
Submitted by: mmel, Rafael Espíndola
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Currently some ARM platforms implement their own platform_probe_and_attach()
function and other use common routine that calls platform's PLATFORM_ATTACH
method.
Keep the old description to match the preferred way of naming things.
Pointed out by: andrew
This commit enables usage of HWPMC interrupts for the
Marvell SoCs, which use MPIC (Armada38x and ArmadaXP).
Those interrupts require extra unmasking, comparing to
others. Also, in order to process counters per-CPU,
they are masked/unmasked using separate registers' sets
for each core.
Submitted by: Michal Mazur <mkm@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Differential revision: https://reviews.freebsd.org/D10913
This patch contains a new driver for the network unit of Marvell
Armada 38x/XP SoCs, called NETA. This support was thoroughly tested
and optimised in terms of stability and performance. Additional
hardware features, like Buffer Management (BM) or Parser and Classifier
(PnC) will be progressively supported as needed.
Submitted by: Fabien Thomas <fabien.thomas@stormshield.eu>
Arnaud Ysmal <arnaud.ysmal@stormshield.eu>
Zbigniew Bodek <zbb@semihalf.com>
Michal Mazur <mkm@semihalf.com>
Bartosz Szczepanek <bsz@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield (main development)
Netgate (cleanup and upstreaming)
Differential revision: https://reviews.freebsd.org/D10706
These quirks are intended for optimizing CPU performance, not for
applying errata workarounds. Nobody can expect that CPU with unfixed
errata is stable enough to execute the kernel until quirks are applied.
MFC after: 3 weeks
struct thread.
For all architectures, the syscall trap handlers have to allocate the
structure on the stack. The structure takes 88 bytes on 64bit arches
which is not negligible. Also, it cannot be easily found by other
code, which e.g. caused duplication of some members of the structure
to struct thread already. The change removes td_dbg_sc_code and
td_dbg_sc_nargs which were directly copied from syscall_args.
The structure is put into the copied on fork part of the struct thread
to make the syscall arguments information correct in the child after
fork.
This move will also allow several more uses shortly.
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
X-Differential revision: https://reviews.freebsd.org/D11080
This commit is another part of preparation for PCIe multi-port
support for Marvell SoCs. Some device trees include pcie-controller
node as a bus-parent of pcie nodes. This patch adds support for
new bus, collects and configures device informations and finally
adds PCIB devices as a childs of pcie-controller in Newbus hierarchy.
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained form: Semihalf
Sponsored by: Stormshield
Reviewed by: https://reviews.freebsd.org/D10906
Original PCIe nodes for Marvell SoCs consists of ports' nodes
under main controller node. In order to properly parse
this kind of representation in DT a mechanism for traversing
through the tree required an update. Moreover, processing FDT
data consisting of more than 2 cells had to be fixed,
because the 'reg' property of mrvl,pcie node have additional
parameter in front of 64-bit address. It should be skipped
by default. This commit works properly with old mrvl,pcie
representation for Kirkwood and ArmadaXP SoCs.
Submitted by: Wojciech Macek <wma@semihalf.com>
Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Differential revision: https://reviews.freebsd.org/D10905
This patch fixes sporadic problems with updating time
with mv_rtc driver by configuring access to it via MBUS.
For this purpose already existing second set of resources
in rtc@3800 node of Armada 38x DT is used.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10901
This commit enables optional reset of the RTC, in case
its registers' contents did not sustain the reboot or power-off/on
sequence. Without it, further usage of RTC is impossible
(e.g. writing values to RTC_TIME register will not succeed).
The reset is performed only if Clock Correction register
does not comprise RTC_NOMINAL_TIMING, what helps to distinguish,
whether the software configured RTC before or it comprises
the default value.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10900
could be overridden in the SoC specific code, but this would break GENERIC
as it is likely to be incorrect.
Remove the versatile implementation of cpu_initclocks as it's unneeded.
This patch fixes a bug introduced with commit:
r294510 "Remove an extra '!' found by clang 3.8."
'!' was removed without inverting the logic, which
broke PCIe legacy interrupts operation for Marvell
controllers.
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Netgate
Armada 38x SoC's equipped with 4GB DRAM suffer freeze
during CESA operation, if MBUS window opened at given
DRAM CS reaches end of the address space. Apply a workaround
by setting the window size to the closest possible
value, i.e. divide it by 2 (it has to be power-of-2).
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10724
PM status is only supported on Kirkwood and Disvovery.
Cleanup the code to properly report its state on
other platforms.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10718
DELAY is a problematic routine called all over the kernel.
Armada38x using CA-9 CPUs are using mpcore timer to count events
and measure time but DELAY in the mpcore timer code is a weak
function reference and therefore will be replaced by the platform
implementation if the one is introduced. Since Armada38x uses
on-chip watchdog to which the driver is merged with the on-chip timer
driver there will be a platform DELAY implementation.
The latter however will not use any HW timers as it will not attempt
to configure any. Phony busy loop will be used instead.
To fix that we introduce a separate watchdog driver for Armada platforms,
(currently only A38X) and stop using Marvell timer driver. That
switches DELAY to the desired implementation.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10710
Resolving CPU windows from localbus entry caused buffer overflow
and memory corruption. Fix wrong indexing and ensure the index
does not exceed table size.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10720
Marvell Armada 380 is a uni-processor variant of the 38x SoC
family. A function platform_mp_setmaxid() was setting a hardcoded
value, which caused boot fail on A380. Fix this by relying on
the CPU count obtained from device tree nodes.
Submitted by: Marcin Wojtas <mw@semihalf.com
Obtained from: Semihalf
Sponsored by: Netgate
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10783
Before the fix for single interrupt, both percpu and non-percpu routes
were enabled/disable at the same time.
Submitted by: Marcin Wojtas <mw@semihalf.com
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10716
For all Marvell devices, MBUS windows configuration is done
in a common place. Only CESA was an exception, so move its
related code from driver to mv_common.c. This way it uses
same proper DRAM information, same as all other interfaces
instead of parsing DT /memory node directly.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10723
consistent and easier to read.
While here, remove two unused static functions and fix a unused function
warning when building !INTRNG.
No functional changes.
Sponsored by: Rubicon Communications, LLC (Netgate)
If MPIC happens to be a slave interrupt controller (as on Armada38x),
it should be attached after primary interrupt controller.
Thus BUS_PASS_ORDER_LATE was added to default BUS_PASS_INTERRUPT.
This change doesn't affect the cases when MPIC is standalone IC.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10715
OF_finddevice doesn't find the "simple-bus" node, which is problematic
for Marvell platforms, using nested buses in Device Tree, like
Armada 38x SoC.
Submitted by: Arnaud Ysmal <arnaud.ysmal@stormshield.eu>
Obtained from: Stormshield
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10719
