commented out example who have either not responded, or specifically
asked not to participate because they do not view AXFR as "a production
service."
2. Add f.root-servers.net to the example after confirmation from
Paul Vixie.
3. Add a warning to the commented out "root zone slave" example to the
effect that it requires more attention than a hints file, and provides
more benefit to larger sites than individual hosts.
4. Correct a typo copied from RFC 2544 which was corrected in a later
errata, and confirmed in RFC 3330. Update the comment to reflect that
RFC 3330 got it right and to avoid confusion down the road. 3330 also
contains a reference back to 2544 for anyone interested in pursuing the
history. [1]
PR: conf/115573 [1]
Submitted by: Oliver Fromme <olli@secnetix.de> [1]
Approved by: re (kensmith)
- Remove unneeded WLOCK/UNLOCK of inp for getting TCB lock.
- Fix panic that may occur when freeing an assoc that has partial
delivery in progress (may dereference null socket pointer when
queuing partial delivery aborted notification)
- Some spacing and comment fixes.
- Fix address add handling to clear cached routes and source addresses
when peer acks the add in case the routing table changes.
Approved by: re@freebsd.org (Bruce Mah)
projected_offset against isn_offset to account for
wrap around.
Reviewed by: gnn, kmacy, silby
Submitted by: yusheng.huang@bluecoat.com
Approved by: re
MFC: 3 days
and newer CPUs (including Core 2 and Core / Core 2 based Xeons). The
driver attaches to each cpu device and creates a sysctl node in that
device's sysctl context (dev.cpu.N.temperature). When invoked, the
handler binds to the appropriate CPU to ensure a correct reading.
Submitted by: Rui Paulo <rpaulo@fnop.net>
Sponsored by: Google Summer of Code 2007
Tested by: des, marcus, Constantine A. Murenin, Ian FREISLICH
Approved by: re (kensmith)
MFC after: 3 weeks
% mount | grep home
/dev/ad4s1e on /home (ufs, local, noatime, soft-updates)
% mount -u -o atime /home
% mount | grep home
/dev/ad4s1e on /home (ufs, local, soft-updates)
Restore this behavior for on 7.x for the following mount options:
noatime, noclusterr, noclusterw, noexec, nosuid, nosymfollow
In addition, on 7.x, the following are equivalent:
mount -u -o atime /home
mount -u -o nonoatime /home
Ideally, when we introduce new mount options, we should avoid
options starting with "no". :)
Requested by: jhb
Reported by: Karol Kwiat <karol.kwiat gmail com>, Scott Hetzel <swhetzel gmail com>
Approved by: re (bmah)
Proxy commit for: rodrigc
for quite some time. All relevant content has been moved to the
installation chapter of the FreeBSD Handbook, which will be the
single source of FreeBSD installation instructions.
In addition to removing redundancy, this change also removes the last
of the machine-dependent documents in the release documentation
set (the release notes and hardware notes were unified to produce
machine-independent documents).
Approved by: re (blanket for installation notes removal)
Nods from: blackend, brueffer, simon, trhodes
No objections on: doc@
Helpful hints from: blackend
floppies or ISO images). We retain the concept of MD
release documentation for now, although it's fairly unlikely
that we'll ever do this again.
Approved by: re (blanket for installation guide removal)
from EoL minus 6 months to EoL minus 3 months, in order to increase the odds
of there actually being a more recent release to which users can upgrade.
(In particular, for releases which are only supported for 12 months, it's
quite likely that the next release will occur between 6 and 9 months later.)
Discussed with: kensmith
Approved by: re (bmah)
MFC after: 3 days
Without this the PHY wouldn't work as expected. This should fix
dual-boot Windows XP machine where RealTek Windows drivers put the
PHY in power down mode during shutdown. The magic PHY register
accesses come from RealTek driver. No datasheets mention the magic
PHY registers.
In general, the PHY wakeup code should go into PHY driver. However it
seems that it only apply to RTL8169S single chip and it would be
another hack if we have rgephy(4) check what parent driver/chip model
is attached.
Reported by: lofi, Laurens Timmermans ( laurens AT timkapel DOT nl )
Tested by: lofi
Obtained from: RealTek FreeBSD driver
Approved by: re (Ken Smith)
- Don't leak the config lock if detach() fails due to the controller char
dev being open.
- Close a race between detach() and a process opening the controller char
dev.
MFC after: 1 week
Approved by: re (bmah)
Fix a resource allocation bug (explained by jhb on -acpi)
Thanks for Mike Tancsa for testing and helping track down the bug.
Approved by: re (kensmith)
MFC after: 3 weeks
detailed status on each of the backing subdisks. This allows userland
to see which subdisks are online, failed, missing, or a hot spare.
MFC after: 1 week
Approved by: re (bmah)
Reviewed by: sos
in *all* less_is_more cases, On the other hand, quit_if_one_screen
should apply iff less_is_more *and* -e.
This change revises the previous change further, which tried
to make less(1) not to send @ti:@te before and after view of
one file in more(1) mode, but affected less -e behavior by
accident.
This is essentially the same patch desichen@ has posted on
-current@. I have adjusted it a bit in order to minimize
difference between our version and the vendor branch.
Approved by: re (bmah, earlier logically equivalent version)
message and then dumps core because the subsequent code assumes that
mmap() succeeded. Since rpc.statd does not have fallback code to
implement the functionality needed to operate on the status file if
it is not memory mapped, rpc.statd should use err() to force the process
to exit if the mmap() call fails.
PR: bin/115430 (mmap() failure previously fixed in statd.c 1.15)
Approved by: re (kensmith)
MFC after: 1 week
differ in their details with calls to a new function, ehci_hcreset(),
that performs the reset.
The original sequences either had no delay or a 1ms delay between
telling the controller to stop and asserting the controller reset
bit. One instance of the original reset sequence waited for the
controller to indicate that its reset was complete before continuing,
but the other two immediately let the subsequent code execute. The
latter is a problem on some hardware, because a read of the HCCPARAMS
register returns an incorrect value while the reset is in progress,
which triggers an infinite loop in ehci_pci_givecontroller(), which
hangs the system on shutdown.
The reset sequence in ehci_hcreset() starts with the most complete
instance from the original code, which contains a loop to wait for
the controller to indicate that its reset is complete. This appears
to be the correct thing to do according to "Enhanced Host Controller
Interface Specification for Universal Serial Bus" revision 1.0,
section 2.3.1. Add another loop to wait for the controller to
indicate that it has stopped before setting the HCRESET bit. This
is required by the section 2.3.1 in the specification, which says
that setting HCRESET before the controller has halted "will result
in undefined behaviour".
Reviewed by: imp (previous patch version without the extra wait loop)
Tested by: se (previous patch version without the extra wait loop)
Approved by: re (bmah)
MFC after: 1 week