Commit Graph

77289 Commits

Author SHA1 Message Date
Rui Paulo
45ea4bc76f Comply with the new cyclic dtrace module variable name
(cyclic_clock_func).
2010-04-21 11:28:13 +00:00
Konstantin Belousov
94c6c6ba67 As was done in r155238 for i386 and in r155239 for amd64, clear the carry
flag for ia32 binary executed on amd64 host in get_mcontext().

PR:	kern/92110 (one more time)
Reported by:	stas
MFC after:	1 week
2010-04-21 11:17:16 +00:00
Bjoern A. Zeeb
1c044382c3 Avoid memory access after free. Use the (shortend) copy for the
ipsec mtu lookup as well.

PR:		kern/145736
Submitted by:	Peter Molnar (peter molnar.cc)
MFC after:	3 days
2010-04-21 10:21:34 +00:00
Rui Paulo
f79727118c Fix another instance of lapic_cyclic_clock_func. 2010-04-20 21:04:57 +00:00
Warner Losh
e8b93e4257 Make sure that we free the passed in data message if we don't actually
insert it onto the queue.  Also, fix a mtx leak if someone turns off
devctl while we're processing a messages.

MFC after:	5 days
2010-04-20 20:39:42 +00:00
Rebecca Cran
62592d9173 It's not necessary to reset the chip every time an input overflow event
occurs. In addition, the delay when programming the short cable fix
should be 100us, not 100ms.

PR:	kern/64556
Submitted by:	Thomas Hurst <tom at hur.st>
Approved by:	rrs (mentor)
MFC after:	1 week
2010-04-20 19:30:12 +00:00
Warner Losh
0e954830e5 Make this file more C++ friendly. 2010-04-20 17:57:43 +00:00
Rui Paulo
0017771c68 Add the necessary hooks for dtrace cyclic module. 2010-04-20 17:22:20 +00:00
Rui Paulo
ff569d8436 Rename the cyclic global variable lapic_cyclic_clock_func to just
cyclic_clock_func. This will make more sense when we start developing non
x86 cyclic version.
2010-04-20 17:03:30 +00:00
Rui Paulo
b527a2a4dc The amd64 version of the cyclic dtrace module is a verbatim copy of the
i386 version, so instead having a copy of the same file, use Makefile
foo to include the i386 version on amd64.
2010-04-20 16:30:17 +00:00
Attilio Rao
0a2d5fea59 Fix compilation in the !SMP case.
Keep the interrupts disabled in order to avoid preemption problems.

Reported by:	tinderbox, b.f. <bf1783 at googlemail dot com>
MFC:		2 weeks
X-MFC:		r206878
2010-04-20 12:22:06 +00:00
Rui Paulo
153bfab76a Remove svn:executable prop. 2010-04-20 10:42:08 +00:00
Konstantin Belousov
5673e3cb08 The cache_enter(9) function shall not be called for doomed dvp.
Assert this.

In the reported panic, vdestroy() fired the assertion "vp has namecache
for ..", because pseudofs may end up doing cache_enter() with reclaimed
dvp, after dotdot lookup temporary unlocked dvp.
Similar problem exists in ufs_lookup() for "." lookup, when vnode
lock needs to be upgraded.

Verify that dvp is not reclaimed before calling cache_enter().

Reported and tested by:	pho
Reviewed by:	kan
MFC after:	2 weeks
2010-04-20 10:19:27 +00:00
Michael Tuexen
ee94f0a272 Update highest_tsn variables when sliding mapping arrays. 2010-04-20 08:51:21 +00:00
Michael Tuexen
553aff12d4 Really print the nr_mapping array when it should be printed.`
MFC after: 3 days.
2010-04-20 08:50:19 +00:00
Alan Cox
5d4a7b7945 Eliminate an unnecessary call to pmap_remove_all(). If a page belongs to
an object whose reference count is zero, then that page cannot possibly
be mapped.
2010-04-20 04:16:39 +00:00
Rick Macklem
a318bc273d For the experimental NFS client doing an NFSv4 mount,
set the NFSCLFLAGS_RECVRINPROG while doing recovery from an expired
lease in a manner similar to r206818 for server reboot recovery.
This will prevent the function that acquires stateids for I/O
operations from acquiring out of date stateids during recovery.
Also, fix up mutex locking on the nfsc_flags field.

MFC after:	1 week
2010-04-20 01:02:39 +00:00
Attilio Rao
95335fd844 getblk lockmgr is mostly used as a msleep() and may lead too easilly to
false positives.
Whitelist it.

Reported by:	Erik Cederstrand <erik at cederstrand dot dk>
2010-04-19 23:40:46 +00:00
Attilio Rao
248bb9379f Fix a deadlock in the shutdown code:
When performing a smp_rendezvous() or more likely, on amd64 and i386,
a smp_tlb_shootdown() the caller will end up with the smp_ipi_mtx
spinlock held, busy-waiting for other CPUs to acknowledge the operation.
As long as CPUs are suspended (via cpu_reset()) between the active mask
read and IPI sending there can be a deadlock where the caller will wait
forever for a dead CPU to acknowledge the operation.
Please note that on CPU0 that is going to be someway heavier because of
the spinlocks being disabled earlier than quitting the machine.

Fix this bug by calling cpu_reset() with the smp_ipi_mtx held.
Note that it is very likely that a saner offline/online CPUs mechanism
will help heavilly in fixing similar cases as it is likely more bugs
of this type may arise in the future.

Reported by:	rwatson
Discussed with:	jhb
Tested by:	rnoland, Giovanni Trematerra
		<giovanni dot trematerra at gmail dot com>
MFC:		2 weeks

Special deciation to:	anyone who made possible to have 16-ways machines
			in Netperf
2010-04-19 23:27:54 +00:00
Pyun YongHyeon
6da6d0a9e3 With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
drivers to take into account for the change. Basically CSUM_TSO
should be checked before checking CSUM_TCP.
2010-04-19 22:10:40 +00:00
Jaakko Heinonen
002d1d1c38 Fix ddb(4) "show geom addr" command when INVARIANTS is enabled. Don't
assert that the topology lock is held when g_valid_obj() is called from
debugger.

MFC after:	1 week
2010-04-19 20:07:35 +00:00
Luigi Rizzo
6ba1ccc0f2 whitespace fixes (trailing whitespace, bad indentation
after a merge, etc.)
2010-04-19 16:17:30 +00:00
Kenneth D. Merry
3579cf4c4f Don't clear other flags (e.g. CSUM_TCP) when setting CSUM_TSO. This was
causing TSO to break for the Xen netfront driver.

Reviewed by:	gibbs, rwatson
MFC after:	7 days
2010-04-19 15:15:36 +00:00
Michael Tuexen
307b49efef Get delayed SACK working again.
MFC after: 3 days.
2010-04-19 14:15:58 +00:00
Rui Paulo
0ff2943ecb Revert r206755. It causes some laptops to stop booting. 2010-04-19 14:07:33 +00:00
Xin LI
0e568ab25c Partially MFp4 #176265 by pjd@:
- Properly initialize and destroy system_taskq.
 - Add a dummy implementation of taskq_create_proc().

Note: We do not currently use system_taskq in ZFS so this is mostly a
no-op at this time.  Proper system_taskq initialization is required
by newer ZFS code.

Ok'ed by:	pjd
MFC after:	2 weeks
2010-04-19 09:03:36 +00:00
Juli Mallett
fe7d6b6e69 Fix MALTA64 build. 2010-04-19 09:03:34 +00:00
Juli Mallett
540247e8c1 Remove unused file. 2010-04-19 07:51:57 +00:00
Juli Mallett
745bba1ab0 o) Eliminate the "stand" frame and its use. Use CALLFRAME_* everywhere.
o) Use <machine/asm.h> macros for register-width, etc., rather than doing it
   by hand in a few more assembly files.
o) Reduce diffs between various bits of TLB refill code in exception.S and
   between interrupt processing code.
o) Use PTR_* to operate on registers that are pointers (e.g. sp).
o) Add and use a macro, CLEAR_PTE_SWBITS rather than using the
   mysteriously-named WIRED_SHIFT to select bits to truncate when loading PTEs.
o) Don't doubly disable interrupts by moving zero to the status register,
   especially since that has the nasty side-effect of taking us out of 64-bit
   mode.
o) Use CLEAR_STATUS to disable interrupts the first time.
o) Keep SR_PX set as well as SR_[KSU]X when doing exception processing.  This
   is the bit that determines whether 64-bit operations are allowed.
o) Don't enable interrupts until configure_final(), like most other ports.
2010-04-19 07:34:26 +00:00
Juli Mallett
5f3173b517 o) Fix XKPHYS physical address extraction. Also define cache coherency
attributes for XKPHYS.
o) Make coprocessor 0 accessor function macros for register+selector registers
   take the full name so that e.g. (as done in this commit), prid selector 1
   can be written through mips_wr_ebase() rather than mips_wr_prid1().
o) Allow for sign extension of 32-bit segment addresses.
o) Remove an unused MIPS-I register number.
2010-04-19 06:01:58 +00:00
Alan Cox
7b7d5b6c58 vm_thread_swapout() can safely dirty the page before rather than after
acquiring the page queues lock.
2010-04-19 00:18:14 +00:00
Juli Mallett
ca596a25f0 o) Add a VM find-space option, VMFS_TLB_ALIGNED_SPACE, which searches the
address space for an address as aligned by the new pmap_align_tlb()
   function, which is for constraints imposed by the TLB. [1]
o) Add a kmem_alloc_nofault_space() function, which acts like
   kmem_alloc_nofault() but allows the caller to specify which find-space
   option to use. [1]
o) Use kmem_alloc_nofault_space() with VMFS_TLB_ALIGNED_SPACE to allocate the
   kernel stack address on MIPS. [1]
o) Make pmap_align_tlb() on MIPS align addresses so that they do not start on
   an odd boundary within the TLB, so that they are suitable for insertion as
   wired entries and do not have to share a TLB entry with another mapping,
   assuming they are appropriately-sized.
o) Eliminate md_realstack now that the kstack will be appropriately-aligned on
   MIPS.
o) Increase the number of guard pages to 2 so that we retain the proper
   alignment of the kstack address.

Reviewed by:	[1] alc
X-MFC-after:	Making sure alc has not come up with a better interface.
2010-04-18 22:32:07 +00:00
Rick Macklem
7ea710b3b1 Avoid extraneous recovery cycles in the experimental NFS client
when an NFSv4 server reboots, by doing two things.
1 - Make the function that acquires a stateid for I/O operations
    block until recovery is complete, so that it doesn't acquire
    out of date stateids.
2 - Only allow a recovery once every 1/2 of a lease duration, since
    the NFSv4 server must provide a recovery grace period of at
    least a lease duration. This should avoid recoveries caused
    by an out of date stateid that was acquired for an I/O op.
    just before a recovery cycle started.

MFC after:	1 week
2010-04-18 22:21:23 +00:00
Alan Cox
b28889a2fc Remove a nonsensical test from vm_pageout_clean(). A page can't be in the
inactive queue and have a non-zero wire count.

Reviewed by:	kib
MFC after:	3 weeks
2010-04-18 21:29:28 +00:00
Rui Paulo
685b0bb814 Delete svn:executable prop. 2010-04-18 18:43:36 +00:00
Alan Cox
4b9dd5d537 There is no justification for vm_object_split() setting PG_REFERENCED on a
page that it is going to sleep on.  Eliminate it.

MFC after:	3 weeks
2010-04-18 17:50:09 +00:00
Pawel Jakub Dawidek
bd7226a572 Restore previous order. 2010-04-18 12:43:33 +00:00
Pawel Jakub Dawidek
224329fb6b Style fixes. 2010-04-18 12:36:53 +00:00
Pawel Jakub Dawidek
eb998be67d Add missing list and lock destruction. 2010-04-18 12:27:07 +00:00
Pawel Jakub Dawidek
ad3cb80827 Extend locks scope to match OpenSolaris. 2010-04-18 12:25:40 +00:00
Pawel Jakub Dawidek
57a81a8bbc Remove racy assertion.
Obtained from:	OpenSolaris
2010-04-18 12:21:52 +00:00
Pawel Jakub Dawidek
5195ca2307 Set ARC_L2_WRITING on L2ARC header creation.
Obtained from:	OpenSolaris
2010-04-18 12:20:33 +00:00
Alan Cox
b11b56b55b In vm_object_madvise() setting PG_REFERENCED on a page before sleeping on
that page only makes sense if the advice is MADV_WILLNEED.  In that case,
the intention is to activate the page, so discouraging the page daemon
from reclaiming the page makes sense.  In contrast, in the other cases,
MADV_DONTNEED and MADV_FREE, it makes no sense whatsoever to discourage
the page daemon from reclaiming the page by setting PG_REFERENCED.

Wrap a nearby line.

Discussed with:	kib
MFC after:	3 weeks
2010-04-17 21:14:37 +00:00
Alan Cox
aefea7f519 In vm_object_backing_scan(), setting PG_REFERENCED on a page before
sleeping on that page is nonsensical.  Doing so reduces the likelihood
that the page daemon will reclaim the page before the thread waiting in
vm_object_backing_scan() is reawakened.  However, it does not guarantee
that the page is not reclaimed, so vm_object_backing_scan() restarts
after reawakening.  More importantly, this muddles the meaning of
PG_REFERENCED.  There is no reason to believe that the caller of
vm_object_backing_scan() is going to use (i.e., access) the contents of
the page.  There is especially no reason to believe that an access is
more likely because vm_object_backing_scan() had to sleep on the page.

Discussed with:	kib
MFC after:	3 weeks
2010-04-17 18:35:07 +00:00
Bernhard Schmidt
82ff07c047 Remove IPW_LOCK_DECL and fix various LORs.
Approved by:	rpaulo (mentor)
2010-04-17 18:18:46 +00:00
Bernhard Schmidt
6e4c30c9cd Use iv_appie_wpa, with this commit WPA works again.
Approved by:	rpaulo (mentor)
2010-04-17 18:17:25 +00:00
Bernhard Schmidt
557c25b48f - Make ipw usable again by moving directly into ASSOC state.
- No need to manually switch to RUN state, assoc response takes care
  of that.

Approved by:	rpaulo (mentor)
2010-04-17 18:16:14 +00:00
Bernhard Schmidt
892d2e9d9b Pass correct RSSI to ieee80211_input*().
Approved by:	rpaulo (mentor)
2010-04-17 18:14:49 +00:00
Bernhard Schmidt
d02ae91a4c Fix comment about ipw_assoc and remove some whitespaces; no functional
changes.

Approved by:	rpaulo (mentor)
2010-04-17 18:13:52 +00:00
Alan Cox
0b6ace4743 Setting PG_REFERENCED on the requested page in swap_pager_getpages() is
either redundant or harmful, depending on the caller.  For example, when
called by vm_fault(), it is redundant.  However, when called by
vm_thread_swapin(), it is harmful.  Specifically, if the thread is later
swapped out, having PG_REFERENCED set on its stack pages leads the page
daemon to reactivate these stack pages and delay their reclamation.

Reviewed by:	kib
MFC after:	3 weeks
2010-04-17 17:02:17 +00:00