This permits requests to provide the AAD in a separate side buffer
instead of as a region in the crypto request input buffer. This is
useful when the main data buffer might not contain the full AAD
(e.g. for TLS or IPsec with ESN).
Unlike separate IVs which are constrained in size and stored in an
array in struct cryptop, separate AAD is provided by the caller
setting a new crp_aad pointer to the buffer. The caller must ensure
the pointer remains valid and the buffer contents static until the
request is completed (e.g. when the callback routine is invoked).
As with separate output buffers, not all drivers support this feature.
Consumers must request use of this feature via a new session flag.
To aid in driver testing, kern.crypto.cryptodev_separate_aad can be
set to force /dev/crypto requests to use a separate AAD buffer.
Discussed with: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25288
There are cases when gif_interfaces cannot be replaced
with cloned_interfaces, such as tunnels with external IPv6 addresses
and internal IPv4 or vice versa. Such configuration requires
extra invocation of ifconfig(8) and supported with gif_interfaces only.
Fix manual page and provide some examples.
MFC after: 1 week
X-MFC-With: 362502
The Quarter Century of Unix book said that 1BSD was released March 1979.
However, the 1BSD tape image that's on Kirk's historical unix collection has an
earlier date.
It was common practice, at the time, to create a new copy of the tape from the
master system when a new tape was to go out, so several different versions of
1BSD, etc were shipped from Berkerely. The date on the 1BSD tape in the Berkeley
archives on Kirk's DVD is dated in January 16 1979 on the label, and has dates
as late as Jan 29 (there's an UPDATE file that says this includes updates
through this date). Note this date as well.
This is in preparation for enabling a loadable SCTP stack. Analogous to
IPSEC/IPSEC_SUPPORT, the SCTP_SUPPORT kernel option must be configured
in order to support a loadable SCTP implementation.
Discussed with: tuexen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The arguments for VFS_CHECKEXP() were changed by r362158.
Also, the numsecflavors and secflavors arguments were not documented,
so add these as well.
This is a content change.
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
the debug messages. While here, clean up some variable naming.
Reviewed by: bcr (manpages), emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25230
pthread_get_name_np() and pthread_set_name_np().
This re-applies r361770 after compatibility fixes.
Reviewed by: antoine, jkim, markj
Tested by: antoine (exp-run)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
applications, which often depend on this being the case. There's a new
sysctl, compat.linux.default_openfiles, to control this behaviour.
Reviewed by: kevans, emaste, bcr (manpages)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25177
Use this in GELI to print out a different message when accelerated
software such as AESNI is used vs plain software crypto.
While here, simplify the logic in GELI a bit for determing which type
of crypto driver was chosen the first time by examining the
capabilities of the matched driver after a single call to
crypto_newsession rather than making separate calls with different
flags.
Reviewed by: delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25126
As timeout(9) was removed and all consumers were converted to
callout(9), reference it instead for the description of sbt, pr,
and flags arguments.
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D25165
As of r361857 all BINUTILS options are disabled by default - ports
have been changed to depend on binutils if they require GNU as, and
all base system assembly files have been switched to use Clang's
integrated assembler.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Add xref to all SIM devices we currently have (including a rough indication
which ones are likely to fail).
Update to include all the CAM options.
Fix a few igor nits while I'm here.
for pthread_get_name_np() and pthread_set_name_np(), to be
compatible with Linux.
PR: 238404
Proposed and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
which happens on some laptops after returning to legacy multiplexing mode
at initialization stage.
PR: 242542
Reported by: Felix Palmen <felix@palmen-it.de>
MFC after: 1 week
2.11BSD was announced on March 14, 1991 in comp.bugs.2bsd by
Steven M. Schultz. The document has a 'revised January 1991'
date at the top.
Patch/1 in the official repo is dated March 31, 1991, and an identical copy of
it was posted to comp.bugs.2bsd on May 5, 1991. Patch 2 in 22 parts was likewise
posted May 18, 1991. This makes the Feb 1992 date too late. It's possible it's a
typo for Feb 1991 since that lines up with the announcement being 2 weeks
later. Without an extant copy of the 2.11 tape, however, it's hard to say for
sure. Go with the date we have the most independent, direct evidence for, which
is the announcement date.
The retirement of obsolete binutils 2.17.50 has been in progress for
quite some time. All tools other than GNU as were removed prior to this
commit, and it was built only on amd64 - installed as /usr/bin/as, and
used as a bootstrap tool.
The amd64 exp-run has completed and failures have now been addressed in
the individual ports, so disable it by default.
PR: 233611, 205250 [exp-run]
Sponsored by: The FreeBSD Foundation
The retirement of obsolete binutils 2.17.50 has been in progress for
quite some time. All tools other than GNU as were removed prior to this
commit, and it was built only on two archs:
i386, installed as /usr/bin/as
amd64, installed as /usr/bin/as and as a bootstrap tool
The i386 exp-run has completed and failures have been addressed in the
individual ports, so disable it there.
PR: 233611, 205250 [exp-run]
Sponsored by: The FreeBSD Foundation
r316063 installed pf's embedded libevent as a private lib, with headers
in /usr/include/private/event. Unfortunately we also have a copy of
libevent v2 included in ntp, which needed to be updated for compatibility
with OpenSSL 1.1.
As unadorned 'libevent' generally refers to libevent v2, be explicit that
this one is libevent v1.
Reviewed by: vangyzen (earlier)
Differential Revision: https://reviews.freebsd.org/D17275
ports/devel/linux_libusb builds FreeBSD libusb with GCC 4.8.5
from devel/linux-c7-devtools. Restore the tests for older GCC
in bsd.sys.mk to accomodate such ports.
Reported by: tijl
Sponsored by: Dell EMC Isilon
Some crypto consumers such as GELI and KTLS for file-backed sendfile
need to store their output in a separate buffer from the input.
Currently these consumers copy the contents of the input buffer into
the output buffer and queue an in-place crypto operation on the output
buffer. Using a separate output buffer avoids this copy.
- Create a new 'struct crypto_buffer' describing a crypto buffer
containing a type and type-specific fields. crp_ilen is gone,
instead buffers that use a flat kernel buffer have a cb_buf_len
field for their length. The length of other buffer types is
inferred from the backing store (e.g. uio_resid for a uio).
Requests now have two such structures: crp_buf for the input buffer,
and crp_obuf for the output buffer.
- Consumers now use helper functions (crypto_use_*,
e.g. crypto_use_mbuf()) to configure the input buffer. If an output
buffer is not configured, the request still modifies the input
buffer in-place. A consumer uses a second set of helper functions
(crypto_use_output_*) to configure an output buffer.
- Consumers must request support for separate output buffers when
creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are
only permitted to queue a request with a separate output buffer on
sessions with this flag set. Existing drivers already reject
sessions with unknown flags, so this permits drivers to be modified
to support this extension without requiring all drivers to change.
- Several data-related functions now have matching versions that
operate on an explicit buffer (e.g. crypto_apply_buf,
crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf).
- Most of the existing data-related functions operate on the input
buffer. However crypto_copyback always writes to the output buffer
if a request uses a separate output buffer.
- For the regions in input/output buffers, the following conventions
are followed:
- AAD and IV are always present in input only and their
fields are offsets into the input buffer.
- payload is always present in both buffers. If a request uses a
separate output buffer, it must set a new crp_payload_start_output
field to the offset of the payload in the output buffer.
- digest is in the input buffer for verify operations, and in the
output buffer for compute operations. crp_digest_start is relative
to the appropriate buffer.
- Add a crypto buffer cursor abstraction. This is a more general form
of some bits in the cryptosoft driver that tried to always use uio's.
However, compared to the original code, this avoids rewalking the uio
iovec array for requests with multiple vectors. It also avoids
allocate an iovec array for mbufs and populating it by instead walking
the mbuf chain directly.
- Update the cryptosoft(4) driver to support separate output buffers
making use of the cursor abstraction.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
Add a 'native_blocksize' member to 'struct enc_xform' that ciphers can
use if they support a partial final block. This is particular useful
for stream ciphers, but can also apply to other ciphers. cryptosoft
will only pass in native blocks to the encrypt and decrypt hooks. For
the final partial block, 'struct enc_xform' now has new
encrypt_last/decrypt_last hooks which accept the length of the final
block. The multi_block methods are also retired.
Mark AES-ICM (AES-CTR) as a stream cipher. This has some interesting
effects on IPsec in that FreeBSD can now properly receive all packets
sent by Linux when using AES-CTR, but FreeBSD can no longer
interoperate with OpenBSD and older verisons of FreeBSD which assume
AES-CTR packets have a payload padded to a 16-byte boundary. Kornel
has offered to work on a patch to add a compatiblity sysctl to enforce
additional padding for AES-CTR in esp_output to permit compatibility
with OpenBSD and older versions of FreeBSD.
AES-XTS continues to use a block size of a single AES block length.
It is possible to adjust it to support partial final blocks by
implementing cipher text stealing via encrypt_last/decrypt_last hooks,
but I have not done so.
Reviewed by: cem (earlier version)
Tested by: Kornel Dulęba <mindal@semihalf.com> (AES-CTR with IPsec)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24906
The flush is needed to prevent cross-process ret2spec, which is not handled
on kernel entry if IBPB is enabled but SMEP is present.
While there, add i386 RSB flush.
Reported by: Anthony Steinhauser <asteinhauser@google.com>
Reviewed by: markj, Anthony Steinhauser
Discussed with: philip
admbugs: 961
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
-development is long and awkward, and is also inconsistent with prior art
from the Linux world, which uses -dev (Debian) or -devel (Red Hat). Follow
the Debian convention, and similarly for debug info packages.
Also remove redundant pkgbase development tag from includes. We already tag
include files with package=runtime,dev; there is no need to separately tag
them as dev.
Discussed with: bapt
Reviewed by: manu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24139
This man page contains stat utilities that are available in
the base system. This is a better approach than looking them
up via "apropos stat" or similar commands.
Thanks to Daniel Ebdrup Jensen for writing the original page
and incorporating the feedback given.
Submitted by: Daniel Ebdrup Jensen
Reviewed by: 0mp, allanjude, brueffer, bcr
Approved by: bcr
MFC after: 3 days
Relnotes: yes (new stats(7) man page)
Differential Revision: https://reviews.freebsd.org/D24417
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Reviewed by: jhb
MFC after: i² days
Differential Revision: yes (see 2/2)
There are no in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24775
It no longer has any in-kernel consumers via OCF. smbfs still uses
single DES directly, so sys/crypto/des remains for that use case.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24773
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
There are no longer any in-kernel consumers. The software
implementation was also a non-functional stub.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24771
They no longer have any in-tree consumers. Note that these are a
different from MD5-HMAC and SHA1-HMAC and were only used with IPsec.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24770
This was removed from IPsec in r286100 and no longer has any in-tree
consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24769
It no longer has any in-tree consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24768
Although a few drivers supported this algorithm, there were never any
in-kernel consumers. cryptosoft and cryptodev never supported it,
and there was not a software xform auth_hash for it.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24767
pf by default does not do per-table address accounting unless the
"counters" keyword is specified in the corresponding pf.conf table
definition. Yet, we always allocate 12 per-CPU counters per table. For
large tables this carries a lot of overhead, so only allocate counters
when they will actually be used.
A further enhancement might be to use a dedicated UMA zone to allocate
counter arrays for table entries, since close to half of the structure
size comes from counter pointers. A related issue is the cost of
zeroing counters, since counter_u64_zero() calls smp_rendezvous() on
some architectures.
Reported by: loos, Jim Pingle <jimp@netgate.com>
Reviewed by: kp
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D24803
It can be dangerous and there is no need for it in the kernel.
Inspired by Kees Cook's change in Linux, and later OpenBSD.
Reviewed by: cem, gordon, philip
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24760
for custom vendor-specific changes to FreeBSD's
default settings.
While here, fix a typo: perfomance -> performance
PR: 245404
Submitted by: Jose Luis Duran
BINUTILS is needed only for ports, and will be disabled once the failing
ports are addressed (likely by growing a binutils dependency).
BINUTILS_BOOTSTRAP is needed only on amd64, for skein_block_asm.s. There
is no need to enable it on i386.
This will all be removed before FreeBSD 13.0.
With the removal of in-tree consumers of DES, Triple DES, and
MD5-HMAC, the only algorithm this driver still supports is SHA1-HMAC.
This is not very useful as a standalone algorithm (IPsec AH-only with
SHA1 would be the only user).
This driver has also not been kept up to date with the original driver
in OpenBSD which supports a few more cards and AES-CBC on newer cards.
The newest card currently supported by this driver was released in
2005.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24691
source that works or is the new location on the
same page.
Submitted by: alfix86_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D23769
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
- Abbreviated month name in .Dd
- position of HISTORY section
- alphabetical ordering within SEE ALSO section
- adding .Ed before .Sh DESCRIPTION
- remove trailing whitespaces
- Line break after a sentence stop
- Use BSD OS macros instead of hardcoded strings
No .Dd bumps as there was no actual content change made
in any of these pages.
Submitted by: Gordon Bergling gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24591
o Shrink sglist(9) functions to work with multipage mbufs down from
four functions to two.
o Don't use 'struct mbuf_ext_pgs *' as argument, use struct mbuf.
o Rename to something matching _epg.
Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598
- Inconsistencies in .Dd like abbreviated month names,
"th" after numbers, or leading zeros
- No line breaks after a sentence stop
- Whitespace at the end of the line
- Use macros for BSD OS names instead of hardcoded names
- CAVEATS instead of CAVEAT in section name
No actual content change in terms of additions were made, so
no bump of the .Dd for these man pages.
All of these issues were found and fixed by Gordon Bergling.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24648
This option was added as a transition aide when symbol versioning was
first added. It was enabled by default in 2007 and is supported even
by the old GPLv2 binutils. Trying to disable it currently fails to
build in libc and at this point it isn't worth fixing the build.
Reported by: Michael Dexter
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24637
A number of components require OpenSSL and fail to build if it is not
enabled. As a first phase force these off under WITHOUT_OPENSSL. A
second phase should make these more fine-grained, allowing the component
to build but without OpenSSL.
PR: 245931
Sponsored by: The FreeBSD Foundation
Gordon Bergling. Hook it up to the build by adding
it to the Makefile.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24589
epoch(9).
In one instance, remove a trailing whitespace while here.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24243
section, it would result in the following error:
"ngctl: send msg: Invalid argument"
The reason for this is the missing whitespace to
separate the arguments. When adding the whitespace,
the example works as intended.
Submitted by: lutz_donnerhacke.de
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D23773
- Add a new TCP_RXTLS_ENABLE socket option to set the encryption and
authentication algorithms and keys as well as the initial sequence
number.
- When reading from a socket using KTLS receive, applications must use
recvmsg(). Each successful call to recvmsg() will return a single
TLS record. A new TCP control message, TLS_GET_RECORD, will contain
the TLS record header of the decrypted record. The regular message
buffer passed to recvmsg() will receive the decrypted payload. This
is similar to the interface used by Linux's KTLS RX except that
Linux does not return the full TLS header in the control message.
- Add plumbing to the TOE KTLS interface to request either transmit
or receive KTLS sessions.
- When a socket is using receive KTLS, redirect reads from
soreceive_stream() into soreceive_generic().
- Note that this interface is currently only defined for TLS 1.1 and
1.2, though I believe we will be able to reuse the same interface
and structures for 1.3.
The sysctl output looks like this:
dev.hwpstate_intel.0.epp: 50
dev.hwpstate_intel.0.%parent: cpu0
dev.hwpstate_intel.0.%pnpinfo:
dev.hwpstate_intel.0.%location:
dev.hwpstate_intel.0.%driver: hwpstate_intel
dev.hwpstate_intel.0.%desc: Intel Speed Shift
but all the '%' got escaped in the manual page, un-escape them.
While here:
- Move the example of dev.hwpstate_intel.%d.%parent after the description to
align with others.
- Capitalize "CPU" (*)
Submitted by: danfe (*)
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24520
The sole in-tree user of this flag has been retired, so remove this
complexity from all drivers. While here, add a helper routine drivers
can use to read the current request's IV into a local buffer. Use
this routine to replace duplicated code in nearly all drivers.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24450
instead of MK_KERBEROS. The reason for this change is some users
prefer to build FreeBSD WITHOUT_KERBEROS, wanting to retain the
Kerberos rc scripts to start/stop MIT Kerberos or Heimdal from ports.
PR: 197337
Reported by: Adam McDougall <ebay at looksharp.net>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24252
According to the upstream man page (which we don't install), none of
libauditd's symbols are intended to be public. Also, I can't find any
evidence for a port that uses libauditd. Therefore, we should treat it like
other such libraries and use PRIVATELIB.
Reported by: phk
Reviewed by: cem, emaste
MFC after: 2 weeks
It is not valid to pass BUS_SPACE_UNRESTRICTED to bus_dma_tag_create()'s
nsegments parameter as it is interpreted as a very large segment count.
Subsequent allocation operations on the tag will preallocate some multiple of
that count. BUS_SPACE_UNRESTRICTED therefore indicates something like:
malloc(infinity).
Discussed with: bcr, jhb (earlier version)
This change allows any downstream or otherwise consumer to easily override
the new -fno-common default on a temporary basis without having to hack into
src.sys.mk, and also makes it a bit easier to search for these specific
cases where -fno-common must be overridden with -fcommon or else the build
will fail.
The gdb build, the only program requiring -fcommon on head/, is switched
over as an example usage. It will need it on all branches, so this does not
harm future mergability.
MFC after: 3 days
on all major Linux distributions as well as NetBSD and OpenBSD.
Remove the undocumented ZONEINFO_OLD_TIMEZONES_SUPPORT and the deprecated
OLDTIMEZONES knobs as they are now the default.
Reviewed by: ngie, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24306
-fno-common will become the default in GCC10/LLVM11. Plenty of work has been
put in to make sure our world builds are no -fno-common clean, so let's slap
the build with this until it becomes the compiler default to ensure we don't
regress.
At this time, we will not be enforcing -fno-common on ports builds. I
suspect most ports will be or quickly become -fno-common clean as they're
naturally built against compilers that default to it, so this will hopefully
become a non-issue in due time. The exception to this, which is actually the
status quo, is that kmods built from ports will continue to build with
-fno-common.
As of the time of writing, I intend to also make stable/12 -fno-common
clean. What's been done will be MFC'd to stable/11 if it's easily applicable
and/or not much work to massage it into being functional, but I anticipate
adding -fcommon to stable/11 builds to maintain its ability to be built with
newer compilers for the rest of its lifetime instead of putting in a third
branch's worth of effort.
instead of sprinkling them out over many disjoint files. This is a follow-up
to achieve the same goal in an incomplete rev.348521.
Approved by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20520
By using -nobuiltininc and adding the clang builtin headers resource dir
to the end of the compiler header search path, we can still find headers
such as immintrin.h but find the FreeBSD version of stddef.h/stdarg.h/..
first.
This is a workaround until we are able to settle on and complete a plan
to harmonize guard macros with LLVM. We've mostly worked out this on
FreeBSD systems by removing select headers from the installed set of
devel/llvm*, but that isn't a good solution for cross build.
Submitted by: arichardson
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17002
For head/, this will remain eternally default-on to maintain the status quo.
For stable/ branches, it should be flipped to default-off to maintain the
status quo.
There's value in being able to flip it one way or the other easily on head
or stable branches, whether you want to gain some performance back on head/
(for machines there's little chance you'll actually hit an assertion) or
potentially diagnose a problem with the version of llvm on an older branch.
Currently, stable branches get the CFLAGS+= -ndebug line uncommented; going
forward, they will instead have the default of LLVM_ASSERTIONS flipped.
Reviewed by: dim, emaste, re (gjb)
MFC after: 1 week
MFC note: flip the default of LLVM_ASSERTIONS
Differential Revision: https://reviews.freebsd.org/D24264
This driver hasn't been relevant in almost 15 years. It was for a product on the
shelves for about 6 months in 2003/2004. I've not updated the driver since then,
and have had nobody talk to me about it since maybe 2006 or 2007. It doesn't
implement a standard interface, and can be better done with libusb. All the
action has moved to webcamd for newer, more fully featured hardware. It makes no
appearances in the nycbug dmesg archive.
Relnotes: yes
MFC After: 3 days
I hope to extend this with some more detail in the future but it gives
a good starting point.
Thanks to 0mp for assistance with markup.
Reviewed by: jkoshy
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23982
If INTERNALLIB is defined we need PIE and bsd.incs.mk is
not included.
PR: 245189
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org//D24233
Document the kernels and worlds targets. Document the TARGETS and EXTRA_TARGETS
variables.
Reviewed by: brooks, bdrewery, emaste (LGTM)
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D24212
Add 'WITHOUT_WORLDS' and 'WITHOUT_KERNELS' as aliases for the inconsistently
named MAKE_JUST_KERNELS and MAKE_JUST_WORLDS respectively. I always forget the
MAKE_ part (or is it BUILD_), and it's inconsistent with everything
else. Document the new things, but leave speculation of any eventual MAKE_JUST_*
deprecation out of the manuals and comments.
Reviewed by: brooks, bdrewery, emaste (LGTM)
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D24212
This is handy for making local hacks to an app
(eg to build it as tool for non-BSD host)
without making a mess of the code base.
Reviewed by: bdrewery
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org//D24101
for IPv4, enabled only for IPv6, and enabled for IPv4 and IPv6.
The current blackhole detection might classify a temporary outage as
an MTU issue and reduces permanently the MSS. Since the consequences of
such a reduction due to a misclassification are much more drastically
for IPv4 than for IPv6, allow the administrator to enable it for IPv6 only.
Reviewed by: bcr@ (man page), Richard Scheffenegger
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24219
EINTEGRITY was previously documented as a UFS-specific error for
mount(2). This documents EINTEGRITY as a filesystem-independent error
that may be reported by the backing store of a filesystem.
While here, document EIO as a filesystem-independent error for both
mount(2) and posix_fadvise(2). EIO was previously only documented for
UFS for mount(2).
Reviewed by: mckusick
Suggested by: mckusick
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24168
