in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
This fixes some panics after disconnecting mounted disks.
Submitted by: imp (slightly different version, which I've then lost)
Reviewed by: kib, imp, mckusick
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9674
by the shutdown(2) system call. This ability has been lost as part of the svn
revision 285910.
Reviewed by: ed, rwatson, glebius, hiren
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10351
do for streaming sockets.
And do more cleanup in the sbappendaddr_locked_internal() to prevent
leak information from existing mbuf to the one, that will be possible
created later by netgraph.
Suggested by: glebius
Tested by: Irina Liakh <spell at itl ua>
MFC after: 1 week
The arm64 binutils only accepts 0 as an offset to the Load-Acquire Register
instructions where llvm will acceps both 0 and 0x0. The thread switching
code uses these with SCHED_ULE to block waiting for a lock to be released.
As the offset of the data to be loaded is zero this is safe, however it is
useful to keep the offset in the instruction to document what is being
loaded.
To work around this issue in binutils only generate the 0x prefix for
non-zero values.
Reported by: kan
Sponsored by: DARPA, AFRL
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
This matches the getcwd() definition.
This is technically an ABI change, but that would only effect 64-bit
big-endian platforms that pass arguments on the stack. We have none of
those.
Reviewed by: jhb
Obtained from: CheriABI
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9428
was issued during VM-initiated i/o (pageout), so that the function
does not try to flush or remove pages or wait for the vm object
paging-in-progress counter.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
X-Differential revision: https://reviews.freebsd.org/D10241
Don't zero unused pointer members again.
Per discussion with secteam we are not issuing an advisory for this
issue as we have no current evidence it leaks exploitable information.
Reviewed by: rwatson, glebius, delphij
MFC after: 1 day
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10227
As posix_fadvise() does not lock the vnode argument, don't capture
detailed vnode information for the time being.
Obtained from: TrustedBSD Project
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
This requires minor changes to the audit framework to allow capturing
paths that are not filesystem paths (i.e., will not be canonicalised
relative to the process current working directory and/or filesystem
root).
Obtained from: TrustedBSD Project
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
resulting in a process dumping core in the corefile.
Also extend procstat to view select members of 'struct ptrace_lwpinfo'
from the contents of the note.
Sponsored by: Dell EMC Isilon
map the 'which' argument into a suitable audit event identifier for the
specific operation requested.
Obtained from: TrustedBSD Project
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
that used to work via the bold hack).
Fix the table entry for bright black. Fix spelling of plain black in
nearby table entries (use the macro for black everywhere everywhere).
Fix the currently-unused non-bright color table to not have bright
colors in entries 9-15.
Improve nearby comments. Start converting to the xterm terminology
and default rendering of "bright" instead of "light" for bright
colors.
Syscons wasn't affected by the bug since I optimized it a little by
converting colors 0-15 directly. This also fixes the layering of
the conversion for these colors.
Apply the same optimization to vt (actually the layer above it). This
also moves the conversion 1 closer to the correct layer for colors
0-15.
The optimization of just avoiding 2 calls to a trivial function is worth
about 10% for simple output to the virtual buffer with occasional
rendering. The optimization is so large because the 2 calls are done
on every character, so although there are too many other calls and
other instructions per character, there are only about 10 times as
many. Old versions of syscons were about 10 times faster for simple
output, by using a fast path with about 12 instructions per character.
Rendering to even slow hardware takes relatively little time provided
it is rarely actually done.
crash when the file shrinks. This also fixes sendfile(2) not sending more
data in a case when the file grows, and the request is open-ended or
specifies a size that is greater than old file size.
PR: 217789
Reviewed by: gallatin
MFC after: 10 days
The existing ELF image activator requires the brandinfo to provide such
a string unconditionally, even if the executable format in question
doesn't use this type of branding. Skip matching when it's a null
pointer.
Reviewed by: kib
MFC after: 2 weeks
This is done so that the thread state changes during the switch
are not confused with the thread state changes reported when the thread
spins on a lock.
Here is an example, three consecutive entries for the same thread (from top to
bottom):
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"sleep", attributes: prio:84, wmesg:"-", lockname:"(null)"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"spinning", attributes: lockname:"sched lock 1"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"running", attributes: none
The above trace could leave an impression that the final state of
the thread was "running".
After this change the sleep state will be reported after the "spinning"
and "running" states reported for the sched lock.
Reviewed by: jhb, markj
MFC after: 1 week
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9961
matches static binaries.
Interpretation of the 'static' there is that the binary must not
specify an interpreter. In particular, shared objects are matched by
the brand if BI_CAN_EXEC_DYN is also set.
This improves precision of the brand matching, which should eliminate
surprises due to brand ordering.
Revert r315701.
Discussed with and tested by: ed (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This will provide a slightly better smoking gun than just stating
"can't remove non-dynamic nodes!" when calling sysctl_ctx_free(9)
and sysctl_remove_{name,oid}(9) with a non-dynamic (likely
static) sysctl.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Because of integer types, the timeout calculation result was limited to
INT_MAX / (1000 * hz) seconds. For systems with hz=10000, this is only 215
seconds. Perform the calculation with 64-bit math to allow sleeping for the
full INT_MAX / hz interval (215000 seconds on such hz=10000 systems).
Submitted by: Scott Ferris <sferris at isilon.com>
Sponsored by: Dell EMC Isilon
We must ensure there's space for the terminating null in the temporary
buffer in imgact_binmisc_populate_interp().
Note that there's no buffer overflow here because xbe->xbe_interpreter's
length and null termination is checked in imgact_binmisc_add_entry()
before imgact_binmisc_populate_interp() is called. However, the latter
should correctly enforce its own bounds.
Reviewed by: sbruno
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10042
vm_pindex_t's into a vm_ooffset_t.
The length given to shm_dotruncate() must never be negative. Assert this.
Tidy up a comment.
Reviewed by: kib
MFC after: 1 week
Add a clock_nanosleep() syscall, as specified by POSIX.
Make nanosleep() a wrapper around it.
Attach the clock_nanosleep test from NetBSD. Adjust it for the
FreeBSD behavior of updating rmtp only when interrupted by a signal.
I believe this to be POSIX-compliant, since POSIX mentions the rmtp
parameter only in the paragraph about EINTR. This is also what
Linux does. (NetBSD updates rmtp unconditionally.)
Copy the whole nanosleep.2 man page from NetBSD because it is complete
and closely resembles the POSIX description. Edit, polish, and reword it
a bit, being sure to keep any relevant text from the FreeBSD page.
Reviewed by: kib, ngie, jilles
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10020
Typically, when elf_load_section() unconditionally passed VM_PROT_ALL to
elf_map_insert(), it was needlessly enabling execute access on the
mapping, and it would later have to call vm_map_protect() to correct the
mapping's access rights. Now, instead, elf_load_section() always passes
its parameter "prot" to elf_map_insert(). So, elf_load_section() must
only call vm_map_protect() if it needs to remove the write access that
was temporarily granted to perform a copyout().
Reviewed by: kib
MFC after: 1 week
nanosleep() updates rmtp on EINVAL. In that case, kern_nanosleep()
has not updated rmt, so sys_nanosleep() updates the user-space rmtp
by copying garbage from its stack frame. This is not only a kernel
memory disclosure, it's also not POSIX-compliant. Fix it to update
rmtp only on EINTR.
Reviewed by: jilles (via D10020), dchagin
MFC after: 3 days
Security: possibly
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10044
for vt. Restore syscons' rendering of background (bg) brightness as
foreground (fg) blinking and vice versa, and add rendering of blinking
as background brightness to vt.
Bright/saturated is conflated with light/white in the implementation
and in this description.
Bright colors were broken in all cases, but appeared to work in the
only case shown by "vidcontrol show". A boldness hack was applied
only in 1 layering-violation place (for some syscons sequences) where
it made some cases seem to work but was undone by clearing bold using
ANSI sequences, and more seriously was not undone when setting
ANSI/xterm dark colors so left them bright. Move this hack to drivers.
The boldness hack is only for fg brightness. Restore/add a similar hack
for bg brightness rendered as fg blinking and vice versa. This works
even better for vt, since vt changes the default text mode to give the
more useful bg brightness instead of fg blinking.
The brightness bit in colors was unnecessarily removed by the boldness
hack. In other cases, it was lost later by teken_256to8(). Use
teken_256to16() to not lose it. teken_256to8() was intended to be
used for bg colors to allow finer or bg-specific control for the more
difficult reduction to 8; however, since 16 bg colors actually work
on VGA except in syscons text mode and the conversion isn't subtle
enough to significantly in that mode, teken_256to8() is not used now.
There are still bugs, especially in vidcontrol, if bright/blinking
background colors are set.
Restore XOR logic for bold/bright fg in syscons (don't change OR
logic for vt). Remove broken ifdef on FG_UNDERLINE and its wrong
or missing bit and restore the correct hard-coded bit. FG_UNDERLINE
is only for mono mode which is not really supported.
Restore XOR logic for blinking/bright bg in syscons (in vt, add
OR logic and render as bright bg). Remove related broken ifdef
on BG_BLINKING and its missing bit and restore the correct
hard-coded bit. The same bit means blinking or bright bg depending
on the mode, and we want to ignore the difference everywhere.
Simplify conversions of attributes in syscons. Don't pretend to
support bold fonts. Don't support unusual encodings of brightness.
It is as good as possible to map 16 VGA colors to 16 xterm-16
colors. E.g., VGA brown -> xterm-16 Olive will be converted back
to VGA brown, so we don't need to convert to xterm-256 Brown. Teken
cons25 compatibility code already does the same, and duplicates some
small tables. This is mostly for the sc -> te direction. The other
direction uses teken_256to16() which is too generic.
The ptrace() user has the option of discarding the signal. In such a
case, p_ptevents should not be modified. If the ptrace() user decides to
send a SIGKILL, ptevents will be cleared in ptracestop(). procfs events
do not have the capability to discard the signal, so continue to clear
the mask in that case.
Reviewed by: jhb (initial revision)
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9939
uma_zcreate()'s alignment argument is supposed to be sizeof(foo) - 1,
and uma.h provides a set of helper macros for common types. Passing
sizeof(void *) results in all of the members being misaligned triggering
unaligned access faults on certain architectures (notably MIPS).
Reported by: brooks
Obtained from: CheriBSD
MFC after: 3 days
Sponsored by: DARPA / AFRL
reviewing all uses of OFF_TO_IDX(), I observed that
vm_object_page_noreuse() is requiring an exclusive lock on the object
when, in fact, a shared lock suffices.
Reviewed by: kib, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D10011
The callout may reschedule itself and execute again before callout_drain()
returns, but we should not clear CALLOUT_ACTIVE until the callout is
stopped.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
I moved this branch from github to a private server, and pulled from the
wrong one when committing r315280, so I failed to include two recent commits.
Thankfully, they were only cosmetic and were included in the review.
Specifically:
Add documentation, polish comments, and improve style(9).
Tested by: pho (r315280)
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9791
POSIX 2008 says this about clock_settime(2):
If the value of the CLOCK_REALTIME clock is set via clock_settime(),
the new value of the clock shall be used to determine the time
of expiration for absolute time services based upon the
CLOCK_REALTIME clock. This applies to the time at which armed
absolute timers expire. If the absolute time requested at the
invocation of such a time service is before the new value of
the clock, the time service shall expire immediately as if the
clock had reached the requested time normally.
Setting the value of the CLOCK_REALTIME clock via clock_settime()
shall have no effect on threads that are blocked waiting for
a relative time service based upon this clock, including the
nanosleep() function; nor on the expiration of relative timers
based upon this clock. Consequently, these time services shall
expire when the requested relative interval elapses, independently
of the new or old value of the clock.
When the real-time clock is adjusted, such as by clock_settime(3),
wake any threads sleeping until an absolute real-clock time.
Such a sleep is indicated by a non-zero td_rtcgen. The sleep functions
will set that field to zero and return zero to tell the caller
to reevaluate its sleep duration based on the new value of the clock.
At present, this affects the following functions:
pthread_cond_timedwait(3)
pthread_mutex_timedlock(3)
pthread_rwlock_timedrdlock(3)
pthread_rwlock_timedwrlock(3)
sem_timedwait(3)
sem_clockwait_np(3)
I'm working on adding clock_nanosleep(2), which will also be affected.
Reported by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed by: jhb, kib
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9791
