kthread_add() takes the same parameters as the old kthread_create()
plus a pointer to a process structure, and adds a kernel thread
to that process.
kproc_kthread_add() takes the parameters for kthread_add,
plus a process name and a pointer to a pointer to a process instead of just
a pointer, and if the proc * is NULL, it creates the process to the
specifications required, before adding the thread to it.
All other old kthread_xxx() calls return, but act on (struct thread *)
instead of (struct proc *). One reason to change the name is so that
any old kernel modules that are lying around and expect kthread_create()
to make a process will not just accidentally link.
fix top to show kernel threads by their thread name in -SH mode
add a tdnam formatting option to ps to show thread names.
make all idle threads actual kthreads and put them into their own idled process.
make all interrupt threads kthreads and put them in an interd process
(mainly for aesthetic and accounting reasons)
rename proc 0 to be 'kernel' and it's swapper thread is now 'swapper'
man page fixes to follow.
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
scheme allowed for 1024 PTE pages, each containing 256 PTEs.
This yielded 2GB of KVA. This is not enough to boot a kernel
on a 16GB box and in general too low for a 64-bit machine.
By adding a level of indirection we now have 1024 2nd-level
directory pages, each capable of supporting 2GB of KVA. This
brings the grand total to 2TB of KVA.
- Restore support for fetching swap information from crash dumps via
kvm_get_swapinfo(3) to fix pstat -T/-s on crash dumps.
Reviewed by: arch@, phk
MFC after: 1 week
bogusly used the kvm_powerpc.c file as a template for the license, but
then either wrote the code himself, or cribbed it from the kvm_i386
file. The only thing from the kvm_powerpc.c file was the license.
Correct this mistake with his blessing.
far more convenient for libkvm to work with because of the page table
block at the beginning. As a result, the MD code is smaller.
libkvm will automatically detect old vs mini dumps on i386 and amd64.
libkvm will handle i386 PAE and non-PAE modes. There is a PAE flag in
the i386 minidump header to signal the width of the entries in the
page table block.
Other convenient values are also present, such as kernbase and the direct
map addresses on amd64.
readable on certain random memory configurations. If the libkvm consumer
tried to read something that was in the very last pdpe, pde or pte slot,
it would bogusly fail.
This is broken in RELENG_6 too.
returned an lseek offset in a "u_long *" value, which can't express >4GB
offsets on 32 bit machines (eg: PAE). Change to "off_t *" for all.
Support ELF crashdumps on i386 and amd64.
Support PAE crashdumps on i386. This is done by auto-detecting the
presence of the IdlePDPT which means that PAE is active.
I used Marcel's _kvm_pa2off strategy and ELF header reader for ELF support
on amd64. Paul Saab ported the amd64 changes to i386 and we implemented
the PAE support from there.
Note that gdb6 in the src tree uses whatever libkvm supports. If you want
to debug an old crash dump, you might want to keep an old libkvm.so handy
and use LD_PRELOAD or the like. This does not detect the old raw dump
format.
Approved by: re
Extract the struct cdev pointer and the tty device from inside rather than
incorrectly casting the 'struct cdev *' pointer to a 'dev_t' int. Not
that this was particularly important since it was only used for reading
vmcore files.
- Add a comment noting that the ru_[us]times values being read aren't
actually valid and need to be computed from the raw values.
Submitted by: many (1)
but with slightly cleaned up interfaces.
The KSE structure has become the same as the "per thread scheduler
private data" structure. In order to not make the diffs too great
one is #defined as the other at this time.
The KSE (or td_sched) structure is now allocated per thread and has no
allocation code of its own.
Concurrency for a KSEGRP is now kept track of via a simple pair of counters
rather than using KSE structures as tokens.
Since the KSE structure is different in each scheduler, kern_switch.c
is now included at the end of each scheduler. Nothing outside the
scheduler knows the contents of the KSE (aka td_sched) structure.
The fields in the ksegrp structure that are to do with the scheduler's
queueing mechanisms are now moved to the kg_sched structure.
(per ksegrp scheduler private data structure). In other words how the
scheduler queues and keeps track of threads is no-one's business except
the scheduler's. This should allow people to write experimental
schedulers with completely different internal structuring.
A scheduler call sched_set_concurrency(kg, N) has been added that
notifies teh scheduler that no more than N threads from that ksegrp
should be allowed to be on concurrently scheduled. This is also
used to enforce 'fainess' at this time so that a ksegrp with
10000 threads can not swamp a the run queue and force out a process
with 1 thread, since the current code will not set the concurrency above
NCPU, and both schedulers will not allow more than that many
onto the system run queue at a time. Each scheduler should eventualy develop
their own methods to do this now that they are effectively separated.
Rejig libthr's kernel interface to follow the same code paths as
linkse for scope system threads. This has slightly hurt libthr's performance
but I will work to recover as much of it as I can.
Thread exit code has been cleaned up greatly.
exit and exec code now transitions a process back to
'standard non-threaded mode' before taking the next step.
Reviewed by: scottl, peter
MFC after: 1 week
ki_childutime, and ki_emul. Also uses the timeradd() macro to correct
the calculation of ki_childtime. That will correct the value returned
when ki_childtime.tv_usec > 1,000,000.
This also implements a new KERN_PROC_GID option for kvm_getprocs().
It also implements the KERN_PROC_RGID and KERN_PROC_SESSION options
which were added to sys/kern/kern_proc.c revision 1.203.
PR: bin/65803 (a very tiny piece of the PR)
Submitted by: Cyrille Lefevre
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
This enable us to use /dev/fwmem* as a core file.
e.g.
ps -M /dev/fwmem0.0 -N kernel.debug
dmesg -M /dev/fwmem0.0 -N kernel.debug
gdb -k -c /dev/fwmem0.0 kernel.debug
You need to set target EUI64 in hw.firewire.fwmem.eui64_hi/lo before
opening the device. On the target arch, (PCI) bus address must be
equivalent to physical address.
(We cannot use this for sparc64 because of IOMMU.)
No objection in: -audit
binaries in /bin and /sbin installed in /lib. Only the versioned files
reside in /lib, the .so symlink continues to live /usr/lib so the
toolchain doesn't need to be modified.
prime objectives are:
o Implement a syscall path based on the epc inststruction (see
sys/ia64/ia64/syscall.s).
o Revisit the places were we need to save and restore registers
and define those contexts in terms of the register sets (see
sys/ia64/include/_regset.h).
Secundairy objectives:
o Remove the requirement to use contigmalloc for kernel stacks.
o Better handling of the high FP registers for SMP systems.
o Switch to the new cpu_switch() and cpu_throw() semantics.
o Add a good unwinder to reconstruct contexts for the rare
cases we need to (see sys/contrib/ia64/libuwx)
Many files are affected by this change. Functionally it boils
down to:
o The EPC syscall doesn't preserve registers it does not need
to preserve and places the arguments differently on the stack.
This affects libc and truss.
o The address of the kernel page directory (kptdir) had to
be unstaticized for use by the nested TLB fault handler.
The name has been changed to ia64_kptdir to avoid conflicts.
The renaming affects libkvm.
o The trapframe only contains the special registers and the
scratch registers. For syscalls using the EPC syscall path
no scratch registers are saved. This affects all places where
the trapframe is accessed. Most notably the unaligned access
handler, the signal delivery code and the debugger.
o Context switching only partly saves the special registers
and the preserved registers. This affects cpu_switch() and
triggered the move to the new semantics, which additionally
affects cpu_throw().
o The high FP registers are either in the PCB or on some
CPU. context switching for them is done lazily. This affects
trap().
o The mcontext has room for all registers, but not all of them
have to be defined in all cases. This mostly affects signal
delivery code now. The *context syscalls are as of yet still
unimplemented.
Many details went into the removal of the requirement to use
contigmalloc for kernel stacks. The details are mostly CPU
specific and limited to exception_save() and exception_restore().
The few places where we create, destroy or switch stacks were
mostly simplified by not having to construct physical addresses
and additionally saving the virtual addresses for later use.
Besides more efficient context saving and restoring, which of
course yields a noticable speedup, this also fixes the dreaded
SMP bootup problem as a side-effect. The details of which are
still not fully understood.
This change includes all the necessary backward compatibility
code to have it handle older userland binaries that use the
break instruction for syscalls. Support for break-based syscalls
has been pessimized in favor of a clean implementation. Due to
the overall better performance of the kernel, this will still
be notived as an improvement if it's noticed at all.
Approved by: re@ (jhb)
that crept in recently. GCC will optimize the divides and multiplies for us.
Submitted by: David Schultz <dschultz@uclink.Berkeley.EDU>
MFC after: 1 day
memory while mapping a virtual address to a physical address.
This allows us to work with virtual addresses for page tables,
provided it doesn't cause infinite recursion. Currently all
page tables are direct mapped.
userland. If someone wants to implement a backup p_siglist in the kernel
for compatability and to export one could. For now, just tell KVM to hand
an empty signal set off to the userland.
after adding __FBSDID().
Garbage-collected kvm_readswap(). This was once used by kvm_uread(), but
kvm_uread() now just reads /proc/<pid>/mem and procfs hopefully handles
swapped out pages.
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infrastructure is
in place)
While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc
are diverging more than they should.. corrective action needed soon.
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
