To use bectl in an example, when one creates a new boot environment with
either `bectl create <be>` or `bectl create -e <otherbe> <be>`, libbe will
take a snapshot of the original boot environment to clone. Previously, this
used %F-%T date format as the snapshot name, but this has some limitations-
attempting to create multiple boot environments in quick succession may
collide if done within the same second.
Tack a serial onto it to reduce the chances of a collision... we could still
collide if multiple processes/threads are creating boot environments at the
same time, but this is likely not a big concern as this has only been
reported as occurring in freebsd-ci setup.
MFC after: 3 days
Despite the call to vtruncbuf() from detrunc(), which results in
zeroing part of the partial page after EOF, there still is a
possibility to retain the stale data which is revived on file
enlargement. If the filesystem block size is greater than the page
size, partial block might keep other after-EOF pages wired and they
get reused then. Fix it by zeroing whole part of the partial buffer
after EOF, not relying on vnode_pager_setsize().
PR: 236977
Reported by: asomers
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
bsnmpclient(3).
snmp_parse_server() function accepts string where some fields can be
omitted: [trans::][community@][server][:port]
"trans" field can be "udp", "udp6", "dgram" and "stream".
"community" can be empty string, if it is omitted, the default value
will be used. For read_community it is "public", for write_comminity
it is "private". "server" field can be hostname, IPv4 address or IPv6
address. IPv6 address should be specified in brackets "[]".
If port is omitted, the default value "snmp" will be used for "udp"
and "udp6" transports. So, now for bsnmpget(1) and bsnmwalk(1) it is
not required to specify all fields in argument of '-s' option. E.g.
# bsnmpget -s 127.1 sysName.0
# bsnmpget -s "udp::127.1" sysName.0
# bsnmpget -s "udp::public@127.1" sysName.0
# bsnmpget -s "udp::public@127.1:161" sysName.0
# bsnmpget -s "udp::[::1]" sysName.0
# bsnmpget -s "udp6::[::1]" sysName.0
# bsnmpget -s "[fe80::1%lo0]" sysName.0
PR: 236664
Reported by: olivier
MFC after: 1 month
Harvesting has to compete for the TPM chip with userspace.
Before this change the callout could hijack an unread buffer
causing a userspace call to the TPM to fail.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: delphij
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19712
The e5500 has an FPU, but lacks the optional fsqrt instruction. This
instruction gets emulated in the kernel, but the emulation uses stale data,
from the last switch out, and does not return the result of the operation
immediately. Fix both of these conditions by saving and restoring the FPRs
around the emulation point.
MFC after: 1 week
MFC with: r345829
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
This fix was committed less than 2 months after the code was forked into the
powerpc kernel. Though powerpc doesn't use quad-precision floating point,
or need it for emulation, the changes do look like correctness fixes
overall.
This was found while trying to get fsqrt emulation working on e5500, which
does have a real FPU, but lacks the fsqrt instruction. This is not the
complete fix, the rest is to be committed separately.
MFC after: 1 week
During truncate, fusefs was discarding entire cached blocks, but it wasn't
zeroing out the unused portion of a final partial block. This resulted in
reads returning stale data.
PR: 233783
Reported by: fsx
Sponsored by: The FreeBSD Foundation
When a new client structure was allocated, it was added to the list
so that it was visible to other threads before the expiry time was
initialized, with only a single reference count.
The caller would increment the reference count, but it was possible
for another thread to decrement the reference count to zero and free
the structure before the caller incremented the reference count.
This could occur because the expiry time was still set to zero when
the new client structure was inserted in the list and the list was
unlocked.
This patch fixes the race by initializing the reference count to two
and initializing all fields, including the expiry time, before inserting
it in the list.
Tested by: peter@ifm.liu.se
PR: 235582
MFC after: 2 weeks
Before this I suppose it was impossible load CAM-based NVMe as module.
Plus this appeared to be needed to build r345815 without NVMe driver.
MFC after: 2 weeks
interrupt enable are not fatal.
The firmware sets up all the interrupt enables based on run time
configuration, which means the information in the enables is more
accurate than what's compiled into the driver. This change also allows
the fatal bits to be updated without any changes in the driver in some
cases.
MFC after: 1 week
Sponsored by: Chelsio Communications
This commit cleans up after recent commits, especially 345766, 345768, and
345781. There is no functional change. The most important change is to add
comments documenting why we can't send flags like O_APPEND in
FUSE_WRITE_OPEN.
PR: 236340
Sponsored by: The FreeBSD Foundation
to no longer be displayed. This was because the reimplementation of
setup_buffer() did not copy the previous contents into any reallocated
buffer.
Reported by: James Wright <james.wright@jigsawdezign.com>
PR: 236947
MFC after: 3 days
[objc-gnustep] Use .init_array not .ctors when requested.
This doesn't make a difference most of the time but FreeBSD/ARM
doesn't run anything in the .ctors array.
This should help with updating the libobjc2 port for armv7.
Requested by: theraven
Upstream PR: https://github.com/gnustep/libobjc2/issues/83
MFC after: 3 days
In particular:
- suspend the mount around vflush() to avoid new writes come after the
vnode is processed;
- flush pending metadata updates (mostly node times);
- remap all rw mappings of files from the mount into ro.
It is not clear to me how to handle writeable mappings on rw->ro for
tmpfs best. Other filesystems, which use vnode vm object, call
vgone() on vnodes with writers, which sets the vm object type to
OBJT_DEAD, and keep the resident pages and installed ptes as is. In
particular, the existing mappings continue to work as far as
application only accesses resident pages, but changes are not flushed
to file.
For tmpfs the vm object of VREG vnodes also serves as the data pages
container, giving single copy of the mapped pages, so it cannot be set
to OBJT_DEAD. Alternatives for making rw mappings ro could be either
invalidating them at all, or marking as CoW.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19737
In particular, this fixes atimes still changing for ro tmpfs.
tmpfs_set_status() gains tmpfs_mount * argument.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19737
This patch adds a new table begemotSnmpdTransInetTable that uses the
InetAddressType textual convention and can be used to create listening
ports for IPv4, IPv6, zoned IPv6 and based on DNS names. It also supports
future extension beyond UDP by adding a protocol identifier to the table
index. In order to support this gensnmptree had to be modified.
Submitted by: harti
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16654
o Fix bug in PLIC_ENABLE macro when irq >= 32.
Tested on the real hardware, which is HiFive Unleashed board.
Thanks to SiFive, Inc. for the board provided.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19775
* Crank the OPAL state machine during the receive loop, to make sure the
pollers are executed
* Add a proper detach function, so the module can be unloaded and reloaded
at runtime.
It still doesn't reliably work 100% of the time on POWER9, and it appears
timing and/or cache related. It may work on POWER8 now.
MFC after: 2 weeks
Since OPAL_GET_MSG does not discriminate between message types, asynchronous
completion events may be received in the OPAL_GET_MSG call, which dequeues
them from the list, thus preventing OPAL_CHECK_ASYNC_COMPLETION from
succeeding. Handle this case by integrating with the messaging framework.
Summary:
OPAL needs to be kicked periodically in order for the firmware to make
progress on its tasks. To do so, create a heartbeat thread to perform this task
every N milliseconds, defined by the device tree. This task is also a central
location to handle all messages received from OPAL.
Reviewed By: luporl
Differential Revision: https://reviews.freebsd.org/D19743
Better Makefile syntax.
Note that this commit is to the project branch, but the review concerns the
merge to head.
Sponsored by: The FreeBSD Foundation
This change takes capsicum-test from upstream and applies some local changes to make the
tests work on FreeBSD when executed via Kyua.
The local modifications are as follows:
1. Make `OpenatTest.WithFlag` pass with the new dot-dot lookup behavior in FreeBSD 12.x+.
2. capsicum-test references a set of helper binaries: `mini-me`, `mini-me.noexec`, and
`mini-me.setuid`, as part of the execve/fexecve tests, via execve, fexecve, and open.
It achieves this upstream by assuming `mini-me*` is in the current directory, however,
in order for Kyua to execute `capsicum-test`, it needs to provide a full path to
`mini-me*`. In order to achieve this, I made `capsicum-test` cache the executable's
path from argv[0] in main(..) and use the cached value to compute the path to
`mini-me*` as part of the execve/fexecve testcases.
3. The capsicum-test test suite assumes that it's always being run on CAPABILITIES enabled
kernels. However, there's a chance that the test will be run on a host without a
CAPABILITIES enabled kernel, so we must check for the support before running the tests.
The way to achieve this is to add the relevant `feature_present("security_capabilities")`
check to SetupEnvironment::SetUp() and skip the tests when the support is not available.
While here, add a check for `kern.trap_enotcap` being enabled. As noted by markj@ in
https://github.com/google/capsicum-test/issues/23, this sysctl being enabled can trigger
non-deterministic failures. Therefore, the tests should be skipped if this sysctl is
enabled.
All local changes have been submitted to the capsicum-test project
(https://github.com/google/capsicum-test) and are in various stages of review.
Please see the following pull requests for more details:
1. https://github.com/google/capsicum-test/pull/35
2. https://github.com/google/capsicum-test/pull/41
3. https://github.com/google/capsicum-test/pull/42
Reviewed by: asomers
Discussed with: emaste, markj
Approved by: emaste (mentor)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D19758
By default, FUSE performs authorization in the server. That means that it's
insecure for the client to reuse FUSE file handles between different users,
groups, or processes. Linux handles this problem by creating a different
FUSE file handle for every file descriptor. FreeBSD can't, due to
differences in our VFS design.
This commit adds credential information to each fuse_filehandle. During
open(2), fusefs will now only reuse a file handle if it matches the exact
same access mode, pid, uid, and gid of the calling process.
PR: 236844
Sponsored by: The FreeBSD Foundation
There is some code duplication in error handling paths in a few functions.
Create a function for printing such errors in human-readable way and get rid
of duplicates.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15912
Using DFLTPHYS/MAXPHYS is not always OK, instead make it possible for the
controller driver to provide maximum data size to MMCCAM, and use it there.
The old stack already does this.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15892
Per the upstream pull-request [1]:
```
gtest prior to this change would completely ignore `GTEST_SKIP()` if
called in `Environment::SetUp()`, instead of bailing out early, unlike
`Test::SetUp()`, which would cause the tests themselves to be skipped.
The only way (prior to this change) to skip the tests would be to
trigger a fatal error via `GTEST_FAIL()`.
Desirable behavior, in this case, when dealing with
`Environment::SetUp()` is to check for prerequisites on a system
(example, kernel supports a particular featureset, e.g., capsicum), and
skip the tests. The alternatives prior to this change would be
undesirable:
- Failing sends the wrong message to the test user, as the result of the
tests is indeterminate, not failed.
- Having to add per-test class abstractions that override `SetUp()` to
test for the capsicum feature set, then skip all of the tests in their
respective SetUp fixtures, would be a lot of human and computational
work; checking for the feature would need to be done for all of the
tests, instead of once for all of the tests.
For those reasons, making `Environment::SetUp()` handle `GTEST_SKIP()`,
by not executing the testcases, is the most desirable solution.
In order to properly diagnose what happened when running the tests if
they are skipped, print out the diagnostics in an ad hoc manner.
Update the documentation to note this change and integrate a new test,
gtest_skip_in_environment_setup_test, into the test suite.
This change addresses #2189.
Signed-off-by: Enji Cooper <yaneurabeya@gmail.com>
```
The goal with my merging in this change is to avoid requiring extensive
refactoring/retesting of test suites when ensuring prerequisites are met,
e.g., checking for a CAPABILITIES-enabled kernel before running capsicum-test
(see D19758 for more details).
The proof-of-concept is being imported before accepted by the upstream
project due to the fact that the upstream project is undergoing a potential
development freeze and the maintainers aren't responding to my PR.
1. https://github.com/google/googletest/pull/2203
Reported by: asomers (https://github.com/google/googletest/issues/2189)
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D19765
'be_destroy' can destroy a boot environment (by name) or a given snapshot.
If the target to be destroyed is a dataset, check if it's mounted. We don't
want to check if the origin dataset is mounted when destroying a snapshot.
PR: 236043
Submitted by: Rob Fairbanks <rob.fx907 gmail com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19650
O_EXEC is useful for fexecve(2) and fchdir(2). Treat it as another fufh
type alongside the existing RDONLY, WRONLY, and RDWR. Prior to r345742 this
would've caused a memory and performance penalty.
PR: 236329
Sponsored by: The FreeBSD Foundation
r345742 replaced fusefs's fufh array with a fufh list. But it left a few
array idioms in place. This commit replaces those idioms with more
efficient list idioms. One location is in fuse_filehandle_close, which now
takes a pointer argument. Three other locations are places that had to loop
over all of a vnode's fuse filehandles.
Sponsored by: The FreeBSD Foundation
