This fixes a bug when two windows use different fonts, but a longer-term
solution is required. The dirty area should be stored as pixels, not
character cells, because such coordinates don't have the same meaning in
all windows, when using different fonts.
MFC after: 1 week
Compared to the deprecated vd_bitbltchr_t callback, vd_bitblt_text_t
receives:
o the whole text buffer
o the dirty area
o the mouse cursor (map, position, colors)
This allows the backend to perform optimization on how to draw things.
The goal is to remove vd_bitbltchr_t and vd_putchar_t, once all driver
are converted (only vt_vga is included in this commit).
In vt_vga, this allows to draw the text and the cursor in one pass,
without ever reading from video memory (because it has all the context).
The main benefit is the speed improvement: no more slideshow during
boot!
Other bugs fixed in vt_vga are:
o left-most characters are drawn properly (the left-most pixels were
missing with bold characters and some wide letters such as 'm')
o no more black square around the cursor
o no cursor flickering when the text is scrolling
There are still many problems to fix: the known issues are marked with
"FIXME" inside the code.
MFC after: 1 week
The goal is to clear the video memory, in case an application drew to
it. So the content shouldn't be loaded in the latches, it can't be
trusted anyway.
This improves a bit the window switch speed.
MFC after: 1 week
At the same time, "w" and "h" members are now called "width" and
"height". The goal is to have a more "public" structure, because it will
soon be passed as argument to a new callback, replacing vd_bitbltchr_t.
MFC after: 1 week
Later, we just see if the "struct mouse_cursor" pointer is set. This
avoids the need to mess with all the conditions several times; this has
been error prone.
While here, rename the variable "m" to a more meaningful "cursor", like
it's done elsewhere in the code.
MFC after: 1 week
This fixes bad looking refresh when switching window: squares instead
of text, flashing screen, and so on. In the worst case, vt_flush() came
at a very inappropriate timing and the screen was not refreshed at all
(leaving squares all over the place).
This doesn't fix the flickering of the screen with vt_vga, because the
sync signal is temporarily stopped and the video memory is cleared.
MFC after: 1 week
Like r270273, this has no effect for now, because the cursor is always
drawn. This is in preparation of future changes to vd_bitbltchr_t API.
MFC after: 1 week
Currently, this has no effect, because the cursor is always redrawn
anyway. But this will be useful after improvements to the vd_bitbltchr_t
callback API.
The vt_device structure members used to store the position of the cursor
as of the last redraw are renamed from vd_mdirty{x,y} to vd_mold{x,y}.
The associated comment is fixed too. Also, their value is now expressed
in pixels, not in character columns/row.
MFC after: 1 week
This avoids unnecessary redraw. In particular, during boot, where the
cursor is disabled and its fake position is [0;0], this triggered a
refresh of the whole screen each time vt_flush() is called.
MFC after: 1 week
Before the global flag was set/unset using the CONS_MOUSECTL ioctl, and
the per-window flag through the MOUSE_SETLEVEL or MOUSE_SETMODE ioctls.
Also, if the cursor is already enabled/disabled, return immediatly. This
avoids to reset the cursor's position to the center of the screen.
This matches syscons' behavior.
While here, remove a trailing space and a redundant variable
declaration.
Rename vt_generate_vga_palette() to vt_generate_cons_palette() and
change it to build a palette where the color index is the same than in
terminal escape codes, not the VGA index. That's what TCHAR_CREATE()
uses and passes to vt(4).
The main differences between both orders are:
o Blue and red are swapped (1 <-> 4)
o Yellow and cyan are swapped (3 <-> 6)
The problem remained unnoticed, because the RGB bit indexes passed to
vt_generate_vga_palette() were reversed. This inversion was cancelled
by the colors inversions in the generated palette. For instance, red
(0xff0000) and blue (0x0000ff) have bytes in opposite order, but were
swapped in the palette. But after changing the value of blue (see last
paragraph), the modified color was in fact the red one.
This commit includes a fix to creator_vt.c, submitted by Nathan
Whitehorn: fb_cmsize is set to 16. Before this, the generated palette
would be overwritte. This fixes colors on sparc64 with a Creator3D
adapter.
While here, tune the palette to better match console colors and improve
the readability (especially the dark blue).
Submitted by: nwhitehorn (fix to creator_vt.c)
MFC after: 1 week
In several functions, vtbuf_putchar() in particular, the lock on vtbuf
is acquired twice:
1. once by the said functions;
2. once in vtbuf_dirty().
Now, vtbuf_dirty_locked() and vtbuf_dirty_cell_locked() allow to
acquire that lock only once.
This improves the input speed of vt(4). To measure the gain, a
50,000-lines file was displayed on the console using cat(1). The time
taken by cat(1) is reported below:
o On amd64, with vt_vga:
- before: 1.0"
- after: 0.5"
o On sparc64, with creator_vt:
- before: 13.6"
- after: 10.5"
MFC after: 1 week
the right register bank for the framebuffer. Disable the assigned-addresses
path on SPARC since it is just a hack for IBM PPC systems and was neither
relevant for nor worked on SPARC anyway.
framebuffer drivers. This lets ofwfb work with xf86-video-scfb and makes
the driver much more generic and less PCI-centric. This changes some
user-visible behavior and will require updates to the xorg-server port
on PowerPC when using ATI graphics cards.
This change is a bit ugly, but so is the coupling between the i915
driver and syscons. It isn't worth developing a more elegant solution
only to support the legacy syscons console.
systems without either a CSM or real graphics drivers, such as my Lenovo
Haswell laptop.
This provides working X with the small complication of a console cursor
permanently overlaid on the upper-left corner of the screen that will be
dealt with later.
Also remove some redundant screen clearing.
rather than only drivers attached later on. This involves a small amount of
code duplication with dev/fb/fbd.c, which will fixed later on.
Also improve performance of vt_blank() by making it not read from the
framebuffer unnecessarily.
to uncacheable. This leads to execrable console performance. Once PMAP is
up, remap the framebuffer as write-combining. This reduces boot time on my
laptop by 60% when booting with EFI.
MFC after: 2 weeks
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
implement options TERMINAL_{KERN,NORM}_ATTR. These are aliased to
SC_{KERNEL_CONS,NORM}_ATTR and like these latter, allow to change the
default colors of normal and kernel text respectively.
Note on the naming: Although affecting the output of vt(4), technically
kern/subr_terminal.c is primarily concerned with changing default colors
so it would be inconsistent to term these options VT_{KERN,NORM}_ATTR.
Actually, if the architecture and abstraction of terminal+teken+vt would
be perfect, dev/vt/* wouldn't be touched by this commit at all.
Reviewed by: emaste
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
With this change and previous work from ray@ it will be possible to put
both in GENERIC, and have one enabled by default, but allow the other to
be selected via the loader.
(The previous implementation had separate kern.vt.disable and
hw.syscons.disable tunables, and would panic if both drivers were
compiled in and neither was explicitly disabled.)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
"Terminus BSD Console" is a derivative of Terminus that is provided
by Mr. Dimitar Zhekov under the 2-clause BSD license for use by the FreeBSD vt(4) console.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
