supports All Cyrix CPUs, IBM Blue Lightning CPU and NexGen (now AMD)
Nx586 CPU, and initialize special registers of Cyrix CPU and msr of
IBM Blue Lightning CPU.
If revision of Cyrix 6x86 CPU < 2.7, CPU cache is enabled in
write-through mode. This can be disabled by kernel configuration
options.
Reviewed by: Bruce Evans <bde@freebsd.org> and
Jordan K. Hubbard <jkh@freebsd.org>
null casts. `time' is nonvolatile for accesses within a region locked
by splclock()/splx(). Accesses outside such a region are invalid, and
splx() must have the side effect of potentially changing all global
variables (since there are hundreds of sort of volatile variables like
`time'), so declaring `time' as volatile didn't have any real benefits.
form `tv = time'. Use a new function gettime(). The current version
just forces atomicicity without fixing precision or efficiency bugs.
Simplified some related valid accesses by using the central function.
Michael submitted code to activate the audio muxes.
fsmp:
extended those changes for different boards.
auto-detection of board types.
auto-detection of tuner types.
auto-detection of stereo option.
Michael submitted code to activate the audio muxes.
fsmp:
extended those changes for different boards.
auto-detection of board types.
auto-detection of tuner types.
auto-detection of stereo option
processes using AF_LOCAL sockets. This hack is going to be used with
Secure RPC to duplicate a feature of STREAMS which has no real counterpart
in sockets (with STREAMS/TLI, you can apparently use t_getinfo() to learn
UID of a local process on the other side of a transport endpoint).
What happens is this: the client sets up a sendmsg() call with ancillary
data using the SCM_CREDS socket-level control message type. It does not
need to fill in the structure. When the kernel notices the data,
unp_internalize() fills in the cmesgcred structure with the sending
process' credentials (UID, EUID, GID, and ancillary groups). This data
is later delivered to the receiving process. The receiver can then
perform the follwing tests:
- Did the client send ancillary data?
o Yes, proceed.
o No, refuse to authenticate the client.
- The the client send data of type SCM_CREDS?
o Yes, proceed.
o No, refuse to authenticate the client.
- Is the cmsgcred structure the right size?
o Yes, proceed.
o No, signal a possible error.
The receiver can now inspect the credential information and use it to
authenticate the client.
Fixed a bug in fxp_mdi_write - a hex number was missing a preceding 0x
and this was causing the routine to not wait for a PHY write to complete.
Added support for link0, link1, and link2 flags to toggle auto-
negotiation, 10/100, and half/full duplex:
link0 disable auto-negotiation
When set, these flags then have meaning:
-link1 10Mbps
link1 100Mbps
-link2 half duplex
link2 full duplex
...needs a manual page.
modern FreeBSD systems will syslog properly on older systems that
still name the logging socket "/dev/log". This includes pre-2.2
versions of FreeBSD as well as BSD/OS systems. If the connect to
"/var/run/log" fails, the function now tries to connect to
"/dev/log" as a fallback.
of setting it (compiled into vfs_conf.c), but we have a dynamic system
in place. This could probably be better done via a runtime configure
flag in the VFS_SET() VFS declaration, perhaps VFCF_LOCAL, and have the
VFS code propagate this down into MNT_LOCAL at mount time. The other FS's
would need to be updated, havinf UFS and MSDOSFS filesystems without
MNT_LOCAL breaks a few things.. the man page rebuild scans for local
filesystems and currently fails, I suspect that other tools like find
and tar with their "local filesystem only" modes might be affected.
Stick 4 more, twin channel only, instructions behind
.if ( TWIN_CHANNEL)
aic7xxx_asm.c:
Add the -O options which allows the specification of which options
to include in a program listing. This makes it possible to easily
determine the address of any instruction in the program across
different hardware/option configurations. Updated usage() as well.
I broke the cable tuning with my 'TEST_A' code. Remove TEST_A define
till I finish this change for both tuning modes. Note that this
will effectively break the new TVTUNER_SETFREQ/TVTUNER_GETFREQ ioctl()s.
These aren't used by anyone but me yet (attempt to provide full resolution
fine tuning for "fringe" stations) so it should be no problem
written:
1) Full duplex mode is now supported (and works!)
2) The 10Mbps-only PCI Pro/10 should now work (untested, however)
Thanks to Justin Gibbs for providing a PCI bus analyzer trace while the
Intel Windows driver was configuring the board...this made it possible
to figure out the mystery bit that I wasn't setting in the PHY for full
duplex to work.
devtotty(). devtotty() must check its arg carefully since the arg is
supplied as ioctl data. This should fix PR3004.
Renamed devtotty() to snpdevtotty().
enable in SCSISEQ during error recovery to deal with the way the
sequencer leaves selections enabled now. Add code to perform "patching"
during sequencer program download.
Spelling fixes obtained from NetBSD.
New sequencer assembler for the aic7xxx adapters. This assembler
performs some amount of register type checking, allows bit
manipulation of symbolic constants, and generates "patch tables"
for conditionalized downloading of portions of the program.
This makes it easier to take full advantage of the different
features of the aic7xxx cards without imposing run time penalies
or being bound to the small memory footprints of the low end
cards for features like target mode.
aic7xxx.reg:
New, assembler parsed, register definitions fo the aic7xxx cards.
This was done primarily in anticipation of 7810 support which
will have a different register layout, but should be able to use
the same assembler. The kernel aic7xxx driver consumes a generated
file in the compile directory to get the definitions of the register
locations.
aic7xxx.seq:
Convert to the slighly different syntax of the new assembler.
Conditionalize SCB_PAGING, ultra, and twin features which shaves
quite a bit of space once the program is downloaded.
Add code to leave the selection hardware enabled during reconnects
that win bus arbitration. This ensures that we will rearbitrate
as soon as the bus goes free instead of delaying for a bit.
When we expect the bus to go free, perform all of the cleanup
associated with that event "up front" and enter a loop awaiting
bus free. If we see a REQ first, complain, but attempt to
continue. This will hopefully address, or at least help diagnose,
the "target didn't send identify" messages that have been reported.
Spelling corrections obtained from NetBSD.
Restores the use of SBLOCK instead of the BSOFF/sectorsize calculation.
Using SBLOCK is bogus however in that it uses DEV_BSIZE instead of
the actual sector size, but that is taken care of in other places.
Changing the SBLOCK would be better, but it affects the system
in other places, and doing it this way makes it possible to
use filesystems that was made before the lite2 merge.
Added obsolete option GATEWAY so that kern_opt.c gets tested.
Added undocumented options LOCKF_DEBUG and SIMPLELOCK_DEBUG so
that these options get tested. The addition of LOCKF_DEBUG shows
that all of kern/kern_lockf.c shouldn't have been moved from ufs.
The debugging parts are very fs-dependent.
. properly declare the variable in in a .h file, as opposed to
using a private extern declaration in userconfig.c;
. move the definition of EISA_SLOTS and therefore the inclusion of
opt_eisa.h into eisaconf.c.
