- Bring in several other devices from OpenBSD while here. Use the
official manufacturer name over the OpenBSD name in the case of
GEMALTO. Reorder list slightly to aid future syncing.
- Remove duplicate SILABS CP2102 define from usbdevs
PR: usb/131912 [1]
Submitted by: Jack Twilley <mathuin gmail.com> [1]
MFC after: 1 week
plug. Note that the Vendor ID 0x04b4 is officially assigned to Cypress,
so use that instead of adding a second vendor with an identical ID, in the
same way other similar cases are treated in usb/usbdevs.
PR: usb/132785
Submitted by: Dirk-Willem van Gulik <dirkx webweaving.org>
MFC after: 1 week
10G cards. 1G cards are x4 only.
- Use constants from pcireg.h for reading the current link width.
- Use pci_set_max_read_req() rather than implementing it by hand.
Reviewed by: np
MFC after: 1 week
This is similar to a fix in r189305 but for earlier ICH versions (<= 5).
Reported by: someone via attilio
Discussed with: des, attilio
MFC after: 1 week
tail pointers of the tx and rx queues. We needed a SYSCTL_PROC
to correctly get the values at run time.
Submitted by: Andrew Boyer aboyer at averesystems.com
MFC after: 1 week
This version adds support for ARC1880; additionally this version fixed
an issue where all devices on a SAS port gets offlined when any device
failed on the port [1].
Many thanks to Areca for continuing to support FreeBSD.
PR: kern/148502 [1]
Submitted by: Ching-Lung Huang <ching2048 areca com tw>
Obtained from: Areca
Tested by: Rich Ercolani <rercola acm jhu edu> [1]
MFC after: 2 weeks
lengths. Make MI wrapper code to validate periods in request. Make kernel
clock management code to honor these hardware limitations while choosing hz,
stathz and profhz values.
- Fixed the interface probe routine to only attach to USB interfaces the driver
actually supports. This allows other drivers to attach to things like
MicroSD slots etc.
- Fixed network interface enumeration to be globally sequential instead of
relying on the USB interface numbers. This make sure the first network
interface always is at uhso0 and the second at usho1 and so on.
- Added a radio kill switch; exposed through sysctl.
- Updated the manual page to be verbose about the number of serial ports and
include iCON 452 in the set of tested hardware.
Submitted by: Fredrik Lindberg
calls. Also add BUS_DMA_COHERENT flag to bus_dmamem_alloc(9) to
take advantage of efficient synchronization for architectures that
support that feature.
Reviewed by: davidch
return code. If context was not setup correctly give up
initialization. While I'm here move variable declarations to the
beginning of the function.
Reviewed by: davidch
AcpiOsMapMemory()/AcpiOsUnmapMemory() (-> pmap_mapbios()/pmap_unmapbios())
for AcpiOsReadMemory() and AcpiOsWriteMemory(). Although they do not sound
too obvious, these functions are exclusively used to access memory mapped
IO in ACPICA.
According to ACPICA User Guide and Programmer Reference, the read data must
be zero extended to fill the 64-bit return value even if the bit width of
the location is less than 64.
- Return error when 64-bit access is requested as we do not support 64-bit
PCI register access (yet). XXX We may have to split it up into two 32-bit
accesses if it is really required.
According to ACPICA User Guide and Programmer Reference, the read data must
be zero extended to fill the 32-bit return value even if the bit width of
the port is less than 32.
- Remove 64-bit read/write from AcpiOsReadMemory() and AcpiOsWriteMemory().
These functions do not support 64-bit access (yet). Clean up style nits
and unnecessary bit masking while I am here.
Reported by: Liu, Jinsong (jinsong dot liu at intel dot com) via
Lin Ming (ming dot m dot lin at intel dot com) [1]
- The 6000 series WiMAX devices need a separate firmware.
- The b-gen devices are not hooked because the hardware revision type
is not know.
Obtained from: OpenBSD
MFC after: 1 week
