GELI used to fail with EINVAL when a read request spanned a disk
sector whose contents did not match the sector's authentication tag.
The recently-added EINTEGRITY more closely matches to the error in
this case.
Reviewed by: cem, mckusick
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24131
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23637
Currently the installer will tag geliboot partitions with both BOOT and
GELIBOOT; the former allows the kernel to taste it at boot, while the latter
is what loaders keys off of.
However, it seems reasonable to assume that if a provider's been tagged with
GELIBOOT that the kernel should also take that as a hint to taste/attach at
boot. This would allow us to stop tagging GELIBOOT partitions with BOOT in
bsdinstall, but I'm not sure that there's a compelling reason to do so any
time soon.
Reviewed by: oshogbo
Differential Revision: https://reviews.freebsd.org/D23387
For the moment, supress the operation not supported messages at this level. In
the fullness of time, we will have better error tracking so we can diagnose
issues in the future.
Reviewed by: scottl@
If the bio was split into several bios going down, completion computes
bio_completed of the original bio as sum of the bio_completes of the
splits. For BIO_SETUP, bio_length means something different than the
length. it is the requested speedup amount, and is duplicated into the
splits, which is in fact reasonable, since we cannot know how the
previous activity was distributed among subordinate geoms. Obviously,
the sum of n bio_length is greater than bio_length for n > 1, which
triggers assert that bio_length >= bio_completed for e.g. geom_stripe
and geom_raid3.
Fix this by reassigning bio_completed from bio_length for completed
BIO_SPEEDED, I do not think it really mattters what we return in
bio_completed.
Reported and tested by: pho
Reviewed by: imp
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23380
%20%20%20 is ugly and doesn't really help make human-readable devfs names.
PR: 243318
Reported by: Peter Eriksson <pen AT lysator.liu.se>
Relnotes: yes
It turns out there's a problem with using g_io to send the speedup. It leads to
a race when there's a resource shortage when a disk fails.
Instead, send BIO_SPEEDUP via struct buf. This is pretty straight forward,
except we need to transfer the bio_flags from b_ioflags for BIO_SPEEDUP commands
in g_vfs_strategy.
Reviewed by: kirk, chs
Differential Revision: https://reviews.freebsd.org/D23117
While some geom layers pass unknown commands down, not all do. For the ones that
don't, pass BIO_SPEEDUP down to the providers that constittue the geom, as
applicable. No changes to vinum or virstor because I was unsure how to add this
support, and I'm also unsure how to test these. gvinum doesn't implement
BIO_FLUSH either, so it may just be poorly maintained. gvirstor is for testing
and not supportig BIO_SPEEDUP is fine.
Reviewed by: chs
Differential Revision: https://reviews.freebsd.org/D23183
The previous behavior of leaving VI_OWEINACT vnodes on the active list without
a hold count is eliminated. Hold count is kept and inactive processing gets
explicitly deferred by setting the VI_DEFINACT flag. The syncer is then
responsible for vdrop.
Reviewed by: kib (previous version)
Tested by: pho (in a larger patch, previous version)
Differential Revision: https://reviews.freebsd.org/D23036
Combined with earlier nstart/nend removal it allows to remove several locks
from request path of GEOM and few other places. It would be cool if we had
more SMP-friendly statistics, but this helps too.
Sponsored by: iXsystems, Inc.
Those counters were abused for decade to workaround broken orphanization
process in different classes by delaying the call while there are active
requests. But from one side it did not close all the races, while from
another was quite expensive on SMP due to trashing twice per request cache
lines of consumer and provider and requiring locks. It lost its sense
after I manually went through all the GEOM classes in base and made
orphanization wait for either provider close or request completion.
Consumer counters are still used under INVARIANTS to detect premature
consumer close and detach. Provider counters are removed completely.
Sponsored by: iXsystems, Inc.
This code was not actively maintained since it was introduced 10 years ago.
It lacks support for many later GEOM features, such as direct dispatch,
unmapped I/O, stripesize/stripeoffset, resize, etc. Plus it is the only
remaining use of GEOM nstart/nend request counters, used there to implement
live insertion/removal, questionable by itself. Plus, as number of people
commented, GEOM is not the best place for I/O scheduler, since it has
limited information about layers both above and below it, required for
efficient scheduling. Plus with the modern shift to SSDs there is just no
more significant need for this kind of scheduling.
Approved by: imp, phk, luigi
Relnotes: yes
If we postpone consumer destruction till close, then the close calls should
not be ignored. Delay geom withering till the last close too.
MFC after: 2 weeks
X-MFC-with: r356162
Sponsored by: iXsystems, Inc.
Previous code closed and destroyed consumer even with I/O in progress.
This patch postpones the destruction till the last close.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Previous code closed and detached consumer even with I/O still in progress.
This patch adds locking and request counting to postpone the close till
the last of running requests completes.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Change the "count_until_fail" option of gnop, now it enables the failing
rating instead of setting them to 100%.
The original patch introduced the new flag, which sets the fail/rate to 100%
after N requests. In some cases, we don't want to have 100% of failure
probabilities. We want to start failing at some point.
For example, on the early stage, we may like to allow some read/writes requests
before having some requests delayed - when we try to mount the partition,
or when we are trying to import the pool.
Another case may be to check how scrub in ZFS will behave on different stages.
This allows us to cover more cases.
The previous behavior still may be configured.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22632
Thanks to this option we can create more then one gnop provider from
single provider. This may be useful for temporary labeling some data
on the disk.
Reviewed by: markj, allanjude, bcr
Differential Revision: https://reviews.freebsd.org/D22304
Previous code closed and destroyed consumer even with I/O in progress.
This patch postpones the destruction till the last close, identical to
GEOM_STRIPE, since they seem to have common origin.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Previous code closed and destroyed direct read consumer even with I/O still
in progress. This patch adds locking and request counting to postpone the
close till the last of running requests completes.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Previous code destroyed softc even with provider still open, that resulted
in panic under load. This change postpones the free till the final close,
when we know for sure there will be no more I/O requests.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
gvinum was the only GEOM class, using consumer nstart/nend fields. Making
it do its own accounting for orphanization purposes allows in perspective
to remove burden of that expensive for SMP accounting from GEOM.
Also the previous implementation spinned in a tight event loop, waiting
for all active BIOs to complete, while the new one knows exactly when it
is possible to close the consumer.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
Add BIO_SPEEDUP bio command and g_io_speedup wrapper. It tells the
lower layers that the upper layers are dealing with some shortage
(dirty pages and/or disk blocks). The lower layers should do what they
can to speed up anything that's been delayed.
The first use will be to tell the CAM I/O scheduler that any TRIM
shaping should be short-circuited because the system needs
blocks. We'll also call it when there's too many resources used by
UFS.
Reviewed by: kirk, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18351
to specify an optional separator to insert before partition name;
eg if it's set to "c/", you'll get "ada0c/s1" instead of "ada0s1".
(It cannot be set to just “/“, since ada0 is a device node, not
a directory.)
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D22193
pp->private just can not be NULL in those places.
In g_disk_start() and g_disk_ioctl() both dp != NULL and !dp->d_destroyed
should always be true if disk_gone() and disk_destroy() are used properly,
since GEOM does not send requests to errored providers. If the protocol is
not followed, then no amount of additional checks here give real safety.
In g_disk_access() though the checks are useful, since GEOM blocks only
new opens for errored providers, but allows closes. It should not happen
if disk_gone() and disk_destroy() are used properly, but may otherwise.
To improve cases when disk_gone() is not used, call it from disk_destroy().
It does not give full guaranties, but it errors the provider and makes
GEOM block unwanted requests at least after some race.
MFC after: 2 weeks
For normal I/Os consumer and provider statuses are checked by g_io_check().
But ioctl calls often do not go through it, being dispatched directly. This
change makes their semantics more alike, protecting lower levels.
MFC after: 2 weeks
Add ATF tests for most gmultipath operations. Add some dtrace probes too,
primarily for configuration changes that happen in response to provider
errors.
PR: 178473
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D22235
In most cases with debug disabled this function does nothing, but argument
passing and the call still cost measurable time due to cache misses, etc.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
It closes the race condition and so allows to remove few NULL checks.
Also while there, use dev->si_drv1 in addition to cp->private to store
softc pointer. For calls coming from the dev side it gives reliable cache
hit instead of often miss before.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
to geom, and nothing we call requires it to be held. It's left over
from a time when the latter wasn't the case. Retire it.
Reviewed in concept: scottl@
via 'diskinfo -v'. This avoids the need to track it down via CAM,
and should also work for disks that don't use CAM. And since it's
inherited thru the GEOM hierarchy, in most cases one doesn't need
to walk the GEOM graph either, eg you can use it on a partition
instead of disk itself.
Reviewed by: allanjude, imp
Sponsored by: Klara Inc
Differential Revision: https://reviews.freebsd.org/D22249
filling in the same defaults that the current userland module uses.
This allows an old geom_nop.so userland module to work with a new kernel.
Approved by: imp (mentor)
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21972
the request. It is the same as gctl_get_paraml() except that the request
is not marked with an error if the parameter is not present.
Approved by: imp (mentor)
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21972
I/O requests after the given number have been allowed though.
Approved by: imp (mentor)
Reviewed by: rpokala kib 0mp mckusick
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21593
GEOM is supposed to be topology-agnostic, but the GPT and BSD partition code
has arbitrary restrictions on nesting that are annoying in cases such as
running VMs on raw partitions (since the VM's partitioning scheme is not
visible to the host).
This patch adds sysctls to disable the restrictions except in the case of
BSD label (and similar) partitions with offset 0 (where we need to avoid
recursively recognizing the label).
Submitted by: Andrew Gierth
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21350
The Zstd format bumps the CLOOP major number to 4 to avoid incompatibility
with older systems. Support in geom_uzip(4) is conditional on the ZSTDIO
kernel option, which is enabled in amd64 GENERIC, but not all in-tree
configurations.
mkuzip(8) was modified slightly to always initialize the nblocks + 1'th
offset in the CLOOP file format. Previously, it was only initialized in the
case where the final compressed block happened to be unaligned w.r.t.
DEV_BSIZE. The "Fake" last+1 block change in r298619 means that the final
compressed block's 'blen' was never correct unless the compressed uzip image
happened to be BSIZE-aligned. This happened in about 1 out of every 512
cases. The zlib and lzma decompressors are probably tolerant of extra trash
following the frame they were told to decode, but Zstd complains that the
input size is incorrect.
Correspondingly, geom_uzip(4) was modified slightly to avoid trashing the
nblocks + 1'th offset when it is known to be initialized to a good value.
This corrects the calculated final real cluster compressed length to match
that printed by mkuzip(8).
mkuzip(8) was refactored somewhat to reduce code duplication and increase
ease of adding other compression formats.
* Input block size validation was pulled out of individual compression
init routines into main().
* Init routines now validate a user-provided compression level or select
an algorithm-specific default, if none was provided.
* A new interface for calculating the maximal compressed size of an
incompressible input block was added for each driver. The generic code
uses it to validate against MAXPHYS as well as to allocate compression
result buffers in the generic code.
* Algorithm selection is now driven by a table lookup, to increase ease of
adding other formats in the future.
mkuzip(8) gained the ability to explicitly specify a compression level with
'-C'. The prior defaults -- 9 for zlib and 6 for lzma -- are maintained.
The new zstd default is 9, to match zlib.
Rather than select lzma or zlib with '-L' or its absense, respectively, a
new argument '-A <algorithm>' is provided to select 'zlib', 'lzma', or
'zstd'. '-L' is considered deprecated, but will probably never be removed.
All of the new features were documented in mkuzip.8; the page was also
cleaned up slightly.
Relnotes: yes
Follow-up on r322318 and r322319 and remove the deprecated modules.
Shift some now-unused kernel files into userspace utilities that incorporate
them. Remove references to removed GEOM classes in userspace utilities.
Reviewed by: imp (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21249
- Use new zlib headers;
- Removed z_alloc and z_free to use the common sys/dev/zlib version.
- Replace z_compressBound with compressBound from zlib.
While there, limit LZMA CFLAGS to apply only for g_uzip_lzma.c.
PR: 229763
Submitted by: Yoshihiro Ota <ota j email ne jp> (with changes,
bugs are mine)
Differential Revision: https://reviews.freebsd.org/D20271
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.
Reviewed by: markj
Discussed with: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21165
This allows to simulated disk that is responding slowly to the IO requests.
Reviewed by: markj, bcr, pjd (previous version)
Differential Revision: https://reviews.freebsd.org/D21052
If g_mirror_taste encountered an error at g_mirror_add_disk, it might
try to g_mirror_destroy the device with the G_MIRROR_DEVICE_FLAG_TASTING
flag still set. This would wait on a worker to complete the destruction
with g_mirror_try_destroy, but that function bails out if the tasting
flag is set, resulting in a deadlock. Clear the tasting flag before
trying to destroy the device.
Test Plan:
sysctl debug.fail_point.mnowait="1%return"
kyua test -k /usr/tests/sys/geom/class/mirror/Kyuafile
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20744
