bits on seems to confuse hardware TX engine.
- For 350 chips, set TX desc's buffer physical address before turning on the
TX desc valid bit.
Submitted by: Jeremy O'Brien obrien654j | gmail, sephe
Obtained from: DragonFly BSD
function that immediately reacquires the lock. Also removes recursive
locking.
- Use the statistics timer to drive the transmit watchdog instead of using
if_watchdog and if_timer.
Tested by: gavin
the sc does not have 'an_have_rssimap' variable.
Add an ANCACHE check to poperly hide the case and make an(4)
compile without INET.
MFC after: 2 months
since the the command and data that is being built to be sent to or read
from the HW lives in the softc. Commands are later run via an_setdef etc.
In the ioctl path various references are kept to the data stored in
the softc so it needs to be protected. Almost think of the command
in the softc a global variable since it essentially is. Since locking
wasn't done in this type of context the commands would get corrupted.
Thanks to avatar@ for catching some lock issues and dhw@ for testing.
Things are a lot more stable except for the MPI-350 cards. My an(4)
remote laptop stays on the network now.
The driver should be changed so that it uses private memory that is passed
to the functions that talk to the card. Then only those functions would
really need to grab locks.
Reviewed by: avatar@
- Trying to eliminate another racing by replacing the timeout(9) with
callout APIs. In addition to that, the callout_drain() in an_detach()
help us to avoid a possible panic-on-free due to the callout API tries
to lock a destroyed mutex.
- In an_stats_update(), check the return value of an_read_record(). This
should reduce the chance of device removal(PCCARD) panic [2].
- Adding a comment to state the fact that an_stats_update() is now called
via callout(9) with a lock held [2].
Submitted by: jhb [1], ambrisko [2]
Reviewed by: jhb, ambrisko
Reported by: dhw
Tested by: dhw
MFC after: 3 days
ioctl().
Note that other information provided by ifconfig(8) such like "list chan"
or "list ap" are still not available at this moment.
Before an(4) is connected to wlan(4), users are encouraged to use
ancontrol(8) to retrieve aforementioned information.
Reported by: dhw (http://lists.freebsd.org/pipermail/freebsd-current/2007-July/074848.html)
Reviewed by: ambrisko
Tested by: dhw
Approved by: re (bmah)
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
casting a structure to a uint32_t *. Many drivers in the tree do this, but
I'll not update them until these changes can be reviewed by the pedantic
standards folks.
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
copy of Ethernet address.
- Change iso88025_ifattach() and fddi_ifattach() to accept MAC
address as an argument, similar to ether_ifattach(), to make
this work.
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash. Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
are called outside of AN_LOCK()/AN_UNLOCK. This fixes the following
WITNESS warning (produced when an(4) PCMCIA card is detached).
taskqueue_drain with the following non-sleepable locks held:
exclusive sleep mutex an0 (network driver) r = 0 (0xc59af168) locked @ /usr/src/sys/dev/an/if_an.c:2836
MFC after: 3 days
Silence from: current@
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
- Clear out an_dma_vaddr on free so we can test to see if dma is
setup when the card is kldunloaded/kldloaded etc. only for MPI350
- Use a common detach like wi(4)
- Notify on RID read overflow and truncate this currently causes
a panic in -stable when the stack during an ifconfig an0 is done
with newer firmware
- Convert from UNLOCK/tsleep/LOCK to msleep. I thought I did that
a while ago.
the packets are immediately returned for sending (e.g. when bridging
or packet forwarding). There are more efficient ways to do this
but for now use the least intrusive approach.
Reviewed by: imp, rwatson
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
- Fix up TX speed changes.
- Make mpi-350 cards sort-of work with new firmware. It RXs okay but TXs
only work for about 14 packets then fails to get an interrupt. The
TX watchdog fires. It has been reported that my hack for now doesn't
break cards with the older firmware. It appears my card has lost
the ability to RX or TX at all but other peoples cards work. I assume
it got damaged in tansport.
MFC: 1 week.
- Cache temp. keys so they are preserved across suspend/resume (MPI-350)
- Reads and writes are real fast to the MPI-350 causing early timeouts so
wait do some DELAYs to slow things down in the spin loops.
- Stream line setting RIDs when they are better to be set via another
function
- Add better support for setting home key via "ifconfig an0 wepkey 9:<key>"
Tested by: Peter Radcliffe <pir@pir.net> (in -stable)
myself in -current & -stable
MFC in: 3 days
