Commit Graph

164 Commits

Author SHA1 Message Date
mckusick
18817ccf44 Delay an optional amount of time after booting before starting a
background fsck. The delay defaults to sixty seconds to allow
large applications such as the X server to start before disk I/O
bandwidth is monopolized by fsck.

Submitted by:	Brooks Davis <brooks@one-eyed-alien.net>
Sponsored by:   DARPA & NAI Labs.
2002-12-18 07:21:31 +00:00
imp
d02589493f Make pccardd have -z by default. This fixes a few startup problems
where people want to have the cards configured.  Lack of -z is a speed
optimization.

Submitted by: many voices on mobile@
Approved by: re@ (rwatson)
MFC after: 3 days
2002-12-06 05:23:37 +00:00
ru
13f0bf4343 Fixed two typos in comments. 2002-11-15 08:26:36 +00:00
imp
f868559af8 Turn off devd until I have a devd.conf file that I can install one
that does no harm.
2002-11-12 07:10:45 +00:00
imp
48e55d4e98 Add devd_enable
Submitted by: dougb
2002-11-10 09:13:31 +00:00
ume
6866e4bdca Add IPv6 setup for ipfilter. `ipv6_ipfilter_rules' was added
to specify rules definition file for ipfilter.  The default is
/etc/ipf6.rules.  If there is a file which is specified by
'ipv6_ipfilter_rules', IPv6 rule is installed.

Reviewed by:	Ronald van der Pol <Ronald.vanderPol@rvdp.org>
MFC after:	1 week
2002-11-02 08:21:26 +00:00
gordon
190ae3a6ce Introduce bootparamd into the boot scripts. Add a bootparamd_enable and
_flags to rc.conf

Submitted by:	John Hay <jhay@zibbi.icomtek.csir.co.za>
2002-09-05 20:14:46 +00:00
gshapiro
de510133e2 Deprecate the use of sendmail_enable="NONE" as it adversely affects the
new rcNG effort.

Submitted by:	Mike Makonnen <makonnen@pacbell.net>
2002-09-03 22:15:57 +00:00
gordon
9b019eb1eb Turn rc_ng on by default now, it's time has come. While we are at it, I'd
like to thank Mike Makonnen for all his work on rcNG. Without him, none
of this would have been possible.
2002-09-02 16:35:01 +00:00
hm
aa0a56823e establish default values for /etc/rc.d/pcvt script 2002-08-30 13:01:42 +00:00
gordon
2f904c0a96 Clean up some variables that should have been done before:
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*

Also change single_mountd_enable to mountd_enable.

We also include shims for all the old variable names.

Submitted by:	Mike Makonnen <makonnen@pacbell.net>
2002-08-14 05:37:15 +00:00
ume
afcf651cf8 Change the default setting of an IPv4-mapped IPv6 address to off.
Requested by:	many people
2002-07-25 15:44:01 +00:00
ume
c8703a911a be able to configure to run an IPv6 routing daemon even on
an end node.

Requested by:	Masachika ISHIZUKA <ishizuka@ish.org>
MFC after:	1 week
2002-07-18 05:00:16 +00:00
gordon
c61b4c2e3d Add a couple of variables for rc.d
Submitted by:	Mike Makonnen
2002-06-13 22:27:31 +00:00
obrien
656c10dac5 We want to play osterage and stick our heads in the sand and ignore things.
Requested by:	jhb
2002-06-04 22:26:11 +00:00
obrien
d3c26c96f0 ntpdate(1) is depreciated. 2002-06-04 21:25:41 +00:00
gordon
969293170b Explictly set kerberos_stash to NO instead of blank. While we are at it,
fix a comment that suggested setting ipv6_ipv4mapping to blank. This
will aid in merging with rcng which requires all veriables to be
explicitly set.

Submitted by:	Mike Makonnen
MFC after:	1 week
2002-05-20 05:26:44 +00:00
dougb
6f9b0f198f Remove reference to the TCP_RESTRICT_RST option, which was removed
over a year ago.

Small ws twiddle while I'm here.
2002-04-27 06:24:58 +00:00
cjc
129b6e1381 Consistently use full pathnames for files, especially executables.
PR:		conf/37292
Submitted by:	Helge Oldach <send-pr@oldach.net>
MFC after:	3 days
2002-04-21 08:32:35 +00:00
peter
b66ff604b7 Back out /etc/rc.d addition. I'd like to see something come of what has
already been imported.  It would have been nice to get it out there
in DP1, but that is too late now.
2002-04-11 08:48:52 +00:00
peter
47709f9931 <peril sensitive sunglasses on>
Add /etc/rc.d to the startup dirs list.  It is a convenient place to put
custom startup scripts instead of hacking a shared rc.local.  eg: ftpd in
listener mode, or maybe even sendmail or another mailer, etc.
<peril sensitive sunglasses off>
2002-04-10 22:42:27 +00:00
asmodai
fa91ff61da Correct path for saver to reflect reality.
Submitted by:	Martin Faxer <gmh003532@brfmasthugget.se>
2002-04-06 18:02:52 +00:00
dd
24845561fa Correct grammar(?) in comments.
PR:		36808
Submitted by:	Andrew Boothman <andrew@cream.org>
2002-04-06 09:28:37 +00:00
gshapiro
cd7393b940 Quoting Peter Wemm, "At great personal risk, touch the sendmail startup
again."

As an alternative to sendmail_enable=NONE, solve the boot time problem
for non-sendmail users completely by moving all of the sendmail startup
code from /etc/rc to /etc/rc.sendmail.  The source for that script will
be kept in src/etc/sendmail/rc.sendmail so make.conf's NO_SENDMAIL will
prevent it from being installed.  A new rc.conf variable,
mta_start_script specifies the script to run to start the user's
preferred MTA.  For backward compatibility, it will default to
/etc/rc.sendmail.  The specified script is called out of /etc/rc after
checking to make sure it exists.  A new rc.sendmail.8 man page has also
been added which now houses the sendmail_* variable descriptions
formerly in rc.conf.5.

Use /etc/rc.sendmail in /etc/mail/Makefile to reduce code duplication.

Reviewed by:	-current, -stable, obrien, peter, ru
MFC after:	1 week
2002-04-05 02:30:49 +00:00
gshapiro
cdfdb8738b Provide a way for users to completely prevent sendmail from trying to start
at boot time.

Instead of rc.conf's sendmail_enable only accepting YES or NO, it can now
also accept NONE.  If set to NONE, none of the other sendmail related
startup items will be done.

Remove an extra queue running daemon might be started that wasn't necessary
(it didn't hurt anything but it wasn't needed).

The new logic is:

# MTA
if ${sendmail_enable} == NONE
        # Do nothing
else if ${sendmail_enable} == YES
        start sendmail with ${sendmail_flags}
else if ${sendmail_submit_enable} == YES
        start sendmail with ${sendmail_submit_flags}
else if ${sendmail_outbound_enable} == YES
        start sendmail with ${sendmail_outbound_flags}
endif
# MSP Queue Runner
if ${sendmail_enable} != NONE &&
   [ -r /etc/mail/submit.cf] && ${sendmail_msp_queue_enable} == YES
        start sendmail with ${sendmail_msp_queue_flags}
endif

Discussed with: Thomas Quinot <Thomas.Quinot@Cuivre.FR.EU.ORG>,
		Christopher Schulte <schulte+freebsd@nospam.schulte.org>
MFC after:	1 week
2002-03-28 03:29:22 +00:00
rwatson
02ff3db358 Allow LOMAC to be loaded as part of the boot scripts using "lomac_enable"
setting in rc.conf.

Extracted from the still clammy hands of:	green
Sponsored by:	DARPA, NAI Labs
2002-03-12 21:47:31 +00:00
cjc
5eebfcea9b There is no reason to demand the administrator set 'natd_interface'
when running natd(8) out of the rc-files. It is perfectly valid for
the interface or alias address to be set in a natd(8) configuration
file, not on the command line. Also, loosen up the restrictions on
identifying an IP address argument in 'natd_interface.'

Fix the documentation, rc.conf(5), to reflect this change.

Take the bogus default for 'natd_interface' out of /etc/defaults/rc.conf.

MFC after:	3 days
2002-02-20 10:31:01 +00:00
gshapiro
f9b416a6c3 Add infrastructure for sendmail 8.12. If users are not starting a daemon
at boot (sendmail_enable=NO), a localhost-only daemon may started
(sendmail_submit_enable) as it is needed to accept mail from command line
submissions.  If this isn't desired, see etc/mail/README for more hints.

Optionally (sendmail_msp_queue_enable) start a queue runner for the
submission queue in case a daemon isn't available to accept command line
submitted mail at submission time.

Note that the syslog labels for all of these sendmail processes have been
uniquified for easier log parsing.
2002-02-17 22:19:14 +00:00
cjc
f07bfdc654 Make the rc.conf(5) 'log_in_vain' knob an integer.
Try this out in -CURRENT, MFC, and then consider dropping the
'log_in_vain' knob all together. It really is something for
sysctl.conf(5).

PR:		bin/32953
Reviewed by:	-bugs discussion
MFC after:	1 week
2002-01-26 09:05:13 +00:00
sheldonh
f615512e4a Don't require operators to override the list of network filesystem
types (networkfs_types) with a version that includes the original
list.

This increases the scope for user error and also means that systems with
networkfs_types set in /etc/rc.conf will not benefit from changes to the
list in /etc/defaults/rc.conf on upgrade.

Instead, store the default list in /etc/rc itself and allow the operator
to append to that list by specifying her own list in networkfs_types.

Rename networkfs_types to extra_netfs_types accordingly, as the new name
better describes the purpose of the variable.  Default the value to
'NO'.
2001-12-29 19:42:55 +00:00
sheldonh
3aee09fd5e Re-introduce the fix that delays mounting of network filesystems until
the network is initialized.  This was first implemented in rev 1.268
of src/etc/rc, but was backed out at wollman's request.

The objection was that the right place for the fix is in mount(8).
Having looked at that problem, I find it hard to believe that
the hoops one would have to jump through can be justified by the
desire for purity alone.

Note that there are reported issues surrounding nfsclient kernel
support and mount_nfs(8), which currently make NFS an ugly exception
to the general case.

With this change, systems with non-NFS network filesystems configured
for mounting on startup in /etc/fstab are no longer guaranteed to
fail on startup.
2001-12-27 13:41:27 +00:00
nsayer
4bb45dbc2f Add a commented-out defaultrouter entry for 6to4 users. See RFC-3068 2001-12-06 20:44:14 +00:00
ru
3f4f880250 Whitespace police.
Submitted by:	cjc, ru
2001-11-28 08:52:35 +00:00
darrenr
94889bc82b second part of the patches to complete ipf changes to rc
PR:		multiple
Submitted by:	Arjan de Vet <devet@devet.org>
2001-11-24 15:36:30 +00:00
darrenr
06070b833f Put in place for using ipfs use on shutdown and startup.
PR:		27070
2001-10-20 04:33:02 +00:00
alfred
d480c65d83 Update to note that rpc.statd and rpc.lockd are now needed for
client side NFS mounts.

Stumbled upon by: rwatson
2001-10-18 19:37:57 +00:00
jhb
33c3770bff Remove references to nfsiod and nfs_client_flags now that they are
obsolete.

Submitted by:	Gordon Tetlow <gordont@gnf.org>
2001-10-10 20:36:51 +00:00
des
9e95343494 Add a dumpdir variable that determines where savecore stores crash dumps.
I've had this on my development box for ages...
2001-10-09 18:40:00 +00:00
sheldonh
e31fcee4e1 Quote the value of pccard_ether_delay, the only unquoted value in the
entire file.
2001-10-05 09:01:42 +00:00
ume
078ebb5411 We don't ship pim6dd/pim6sd any more.
MFC after:	1 week
2001-10-03 16:15:59 +00:00
brooks
dcf7dde145 Add a new rc.conf variable, cloned_interfaces, to create cloned
interfaces at boot.
2001-09-19 21:27:27 +00:00
imp
d3c770d2d4 Due to a bug in the ed driver, which leads to hangs when using it with
dhclient and pccard_ether, introduce the concept of a "settle time" to
pccard_ether with the new pccard_ether_delay variable.  Defaults to 5
seconds, which is enough time for the ed driver to finish its
autoconfiguration for newer Linksys based cards.  This also can
eliminate the ed0: timeout messages that happen at startup as well.

MFC: after RE says OK.
2001-09-13 06:18:07 +00:00
rwatson
6bc0d20201 o Add sample syslogd_flags for "-ss" which causes syslogd not to bind
an inet socket.
2001-09-02 23:34:19 +00:00
obrien
c0a1315089 Remove more vestages of diskcheckd, which is now in ports/sysutils. 2001-08-29 05:39:07 +00:00
kuriyama
40c6311b53 Invoke named with privilege of bind:bind.
Change pidfile location to /var/run/named/pid.
2001-08-23 13:34:45 +00:00
markm
22aa258b31 Upgraded launchpad for kerberos. Noe kerberos IV OR kerberos 5
may be started at boot for kerberos servers.
2001-07-28 19:57:57 +00:00
hm
f624f22b32 change the default for isdn_fsdev to NO. specifying a device here
results in a potential conflict with a getty running on that device.
PR:		26818
Submitted by:	Clement Ballabriga <clement@asso.ups-tlse.fr>
2001-07-23 14:24:31 +00:00
roam
401d22d5ac Add a script_name_sep rc.conf knob to specify the IFS character
for separating the startup scripts' list into individual filenames.

Run the shutdown scripts in reverse alphabetical order, so dependent
services are stopped before the services they depend upon.

Reviewed by:	-arch, -audit
MFC after:	3 weeks
2001-07-17 14:33:52 +00:00
ume
11cef0ec41 Change default of ipv6_default_interface to NO. This is meaningless
in most cases and rather harmful.

Reported by:	Kevin Oberman <oberman@es.net>
MFC after:	1 week
2001-06-28 21:45:47 +00:00
dd
fe47a79f92 Introduce syslogd_program and inetd_program variables in case somebody
wants to replace one of those programs.

PR:		13609
Submitted by:	Goran Lowkrantz <goran.lowkrantz@infologigruppen.se>
2001-06-28 03:32:10 +00:00