off by default.
o Apparently the routine displaying the informational messages wasn't
checking its knob in rc.conf, so fix that as well.
Requested by: obrien
devfs(8) rules in rc(8). It is most useful for applying
rules to devfs(5) mount points in /dev or inside jails.
The following line of script is sufficient to
mount a relatively useful+secure devfs(5) in a jail:
devfs_mount_jail /some/jail/dev
Some new shell routines available to scripts that source
rc.subr(5):
o devfs_link - Makes it a little easier to create symlinks
o devfs_init_rulesets - Create devfs(8) rulesets from devfs.rules
o devfs_set_ruleset - Set a ruleset to a devfs(5) mount
o devfs_apply_ruleset - Apply a ruleset to a devfs(5) mount
o devfs_domount - Mount devfs(5) and apply some ruleset
o devfs_mount_jail - Mount devfs(5) and apply a ruleset
appropriate to jails.
Additional rulesets can be specified in /etc/devfs.rules.
If the devfs_system_ruleset variable is defined in rc.conf
and it contains the name of a ruleset defined in /etc/defaults/devfs.rules
or user supplied rulesets in /etc/devfs.rules then that ruleset will
be applied to /dev at startup by the /etc/rc.d/devfs script. It can
also be applied post-startup:
/etc/rc.d/devfs start
This is a more flexible mechanism than the previous method of using
/etc/devfs.conf. However, that method is still available.
Note: since devfs(8) doesn't provide any way for creating symlinks
as part of a ruleset, anyone wishing to create symlinks in a devfs(5)
as part of the bootup sequence will still have to rely on /etc/devfs.conf.
use the atmconfig(8) utility instead of route(8) to install those routes.
For this we need a new rc.conf variable natm_static_routes that works
just like static_routes except that the referenced routes use the syntax
of atmconfig(8).
Okay'ed by: mtm
This commit has two pieces. One half is the watchdog kernel code which lives
primarily in hardclock() in sys/kern/kern_clock.c. The other half is a userland
daemon which, when run, will keep the watchdog from firing while the userland
is intact and functioning.
Approved by: jeff (mentor)
take advantage of the rc.subr(8) glue. They are renamed dhclient_program
and dhclient_flags.
o Rename them in rc.conf(5)
o Rename them in /etc/defaults/rc.conf
o Add the deprecated variables to /etc/rc.subr
o Isolate the use of the 'command' variable to the
NetBSD specific parts in /etc/rc.d/dhclient.
o Now that dhcp_flags has also been renamed it will
be applied properly by rc.subr(8) glue code.
Reported by: John Nielsen <john@jnielsen.net>
All functionality from the previous system has been preserved, and
users should still customize their system boot with the familiar
methods, rc.conf, rc.conf.local, rc.firewall, sysctl.conf, etc.
Users who have customized versions of scripts that have been removed
should take great care when upgrading, since the compatibility code
that used those old scripts has also been removed.
be). Using that string leads rc.network to execute:
# sysctl -w vfs.nfs.bufpackets=DEFAULT
vfs.nfs.bufpackets: 4 -> 0
Which isn't what was intended.
PR: conf/31280
MFC after: 3 days
named(8) daemon by providing a new rc.conf knob: named_pidfile
that defaults to the path specified in the system-installed named.conf(5).
Approved by: markm (mentor)
Reviewed by: dougb
Noticed by : Galen Sampson <galen_sampson@yahoo.com>
Dan Pelleg <daniel+bsd@pelleg.org>
PR: conf/46402
MFC: 2 weeks (with re@ approval)
background fsck. The delay defaults to sixty seconds to allow
large applications such as the X server to start before disk I/O
bandwidth is monopolized by fsck.
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
Sponsored by: DARPA & NAI Labs.
where people want to have the cards configured. Lack of -z is a speed
optimization.
Submitted by: many voices on mobile@
Approved by: re@ (rwatson)
MFC after: 3 days
to specify rules definition file for ipfilter. The default is
/etc/ipf6.rules. If there is a file which is specified by
'ipv6_ipfilter_rules', IPv6 rule is installed.
Reviewed by: Ronald van der Pol <Ronald.vanderPol@rvdp.org>
MFC after: 1 week
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*
Also change single_mountd_enable to mountd_enable.
We also include shims for all the old variable names.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
fix a comment that suggested setting ipv6_ipv4mapping to blank. This
will aid in merging with rcng which requires all veriables to be
explicitly set.
Submitted by: Mike Makonnen
MFC after: 1 week
Add /etc/rc.d to the startup dirs list. It is a convenient place to put
custom startup scripts instead of hacking a shared rc.local. eg: ftpd in
listener mode, or maybe even sendmail or another mailer, etc.
<peril sensitive sunglasses off>
again."
As an alternative to sendmail_enable=NONE, solve the boot time problem
for non-sendmail users completely by moving all of the sendmail startup
code from /etc/rc to /etc/rc.sendmail. The source for that script will
be kept in src/etc/sendmail/rc.sendmail so make.conf's NO_SENDMAIL will
prevent it from being installed. A new rc.conf variable,
mta_start_script specifies the script to run to start the user's
preferred MTA. For backward compatibility, it will default to
/etc/rc.sendmail. The specified script is called out of /etc/rc after
checking to make sure it exists. A new rc.sendmail.8 man page has also
been added which now houses the sendmail_* variable descriptions
formerly in rc.conf.5.
Use /etc/rc.sendmail in /etc/mail/Makefile to reduce code duplication.
Reviewed by: -current, -stable, obrien, peter, ru
MFC after: 1 week
at boot time.
Instead of rc.conf's sendmail_enable only accepting YES or NO, it can now
also accept NONE. If set to NONE, none of the other sendmail related
startup items will be done.
Remove an extra queue running daemon might be started that wasn't necessary
(it didn't hurt anything but it wasn't needed).
The new logic is:
# MTA
if ${sendmail_enable} == NONE
# Do nothing
else if ${sendmail_enable} == YES
start sendmail with ${sendmail_flags}
else if ${sendmail_submit_enable} == YES
start sendmail with ${sendmail_submit_flags}
else if ${sendmail_outbound_enable} == YES
start sendmail with ${sendmail_outbound_flags}
endif
# MSP Queue Runner
if ${sendmail_enable} != NONE &&
[ -r /etc/mail/submit.cf] && ${sendmail_msp_queue_enable} == YES
start sendmail with ${sendmail_msp_queue_flags}
endif
Discussed with: Thomas Quinot <Thomas.Quinot@Cuivre.FR.EU.ORG>,
Christopher Schulte <schulte+freebsd@nospam.schulte.org>
MFC after: 1 week
when running natd(8) out of the rc-files. It is perfectly valid for
the interface or alias address to be set in a natd(8) configuration
file, not on the command line. Also, loosen up the restrictions on
identifying an IP address argument in 'natd_interface.'
Fix the documentation, rc.conf(5), to reflect this change.
Take the bogus default for 'natd_interface' out of /etc/defaults/rc.conf.
MFC after: 3 days
at boot (sendmail_enable=NO), a localhost-only daemon may started
(sendmail_submit_enable) as it is needed to accept mail from command line
submissions. If this isn't desired, see etc/mail/README for more hints.
Optionally (sendmail_msp_queue_enable) start a queue runner for the
submission queue in case a daemon isn't available to accept command line
submitted mail at submission time.
Note that the syslog labels for all of these sendmail processes have been
uniquified for easier log parsing.
Try this out in -CURRENT, MFC, and then consider dropping the
'log_in_vain' knob all together. It really is something for
sysctl.conf(5).
PR: bin/32953
Reviewed by: -bugs discussion
MFC after: 1 week
