Commit Graph

455 Commits

Author SHA1 Message Date
attilio
efcca33ac5 Disconnect non-MPSAFE PORTALFS from the build in preparation for dropping
GIANT from VFS.

This is not targeted for MFC.
2012-10-16 09:59:10 +00:00
dteske
ae42961686 Import sysutils/sysrc from the ports tree (current version 5.1). Importing
disconnected under the WITH_BSDCONFIG flag (a good idea since this version of
sysrc(8) indeed requires the `sysrc.subr' module installed by bsdconfig(8)).

Multiple reasons sysrc should not simply continue to live in ports. The most
important being that it is tightly coupled with the base.

Approved by:	adrian (co-mentor)
2012-10-03 02:32:47 +00:00
brooks
b4eee9541e Add isf(4), a driver for the Intel StrataFlash family of NOR flash parts.
The driver attempts to support all documented parts, but has only been
tested with the 512Mbit part on the Terasic DE4 FPGA board.  It should be
trivial to adapt the driver's attach routine to other embedded boards
using with any parts in the family.

Also import isfctl(8) which can be used to erase sections of the flash.

Sponsored by:	DARPA, AFRL
2012-08-25 18:08:20 +00:00
dteske
3981b9b76a Import bsdconfig(8) as a replacement for the post-install abilities of
deprecated sysinstall(8). NOTE: WITH_BSDCONFIG is currently required.

Submitted by:	Devin Teske (dteske), Ron McDowell <rcm@fuzzwad.org>
Reviewed by:	Ron McDowell <rcm@fuzzwad.org>
Approved by:	Ed Maste (emaste)
2012-07-14 03:16:57 +00:00
jhb
2b8d56f3cf The etcupdate utility is a tool for managing updates to files that are
not updated as part of `make installworld' such as files in /etc.  It
manages updates by doing a three-way merge of changes made to these files
against the local versions.  It is also designed to minimize the amount
of user intervention with the goal of simplifying upgrades for clusters
of machines.

The primary difference from mergemaster is that etcupdate requires less
manual work.  The primary difference from etcmerge is that etcupdate
updates files in-place similar to mergemaster rather than building a
separate /etc tree.

Requested by:	obrien, kib, theraven, joeld (among others)
2012-07-13 13:23:48 +00:00
glebius
318570688d Fix build after r237997. 2012-07-02 18:04:31 +00:00
bapt
1903f68f13 New build KNOB: WITHOUT_PKGBOOTSTRAP to condition building of usr.sbin/pkg
Do not condition usr.sbin/pkg building on WITHOUT_PKGTOOLS anymore, so that users can
remove the old pkg_* tools without removing the pkgng boostrap

Approved by:	des (mentor)
MFC after:	1 month
2012-07-02 15:28:50 +00:00
gber
6f7c735300 Import work done under project/nand (@235533) into head.
The NAND Flash environment consists of several distinct components:
  - NAND framework (drivers harness for NAND controllers and NAND chips)
  - NAND simulator (NANDsim)
  - NAND file system (NAND FS)
  - Companion tools and utilities
  - Documentation (manual pages)

This work is still experimental. Please use with caution.

Obtained from: Semihalf
Supported by:  FreeBSD Foundation, Juniper Networks
2012-05-17 10:11:18 +00:00
bapt
d1d7ab95bb add usr.sbin/pkg which is a bootstrap tool for pkgng.
it respects PACKAGESITE, PACKAGEROOT, and a new environment variable ABI (if a user want to use a different API from the base one for its packages)
it has no man page on purpose to avoid hidding the pkg(8) man page from the pkgng package.
for now uses pkgbeta.FreeBSD.org as default mirror to find its package
it respects MK_PKGTOOLS

Approved by:	des (mentor)
2012-04-15 15:13:36 +00:00
ed
6d383df7bb Replace utxrm(8) by utx(8).
At first, I added a utility called utxrm(8) to remove stale entries from
the user accounting database. It seems there are cases in which we need
to perform different operations on the database as well. Simply rename
utxrm(8) to utx(8) and place the old code under the "rm" command.

In addition to "rm", this tool supports "boot" and "shutdown", which are
going to be used by an rc-script which I am going to commit separately.
2012-02-11 20:28:42 +00:00
ken
fce645c153 Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003.  It has been shipping in
Copan (now SGI) products since 2005.

It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license.  The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.

Some CTL features:

 - Disk and processor device emulation.
 - Tagged queueing
 - SCSI task attribute support (ordered, head of queue, simple tags)
 - SCSI implicit command ordering support.  (e.g. if a read follows a mode
   select, the read will be blocked until the mode select completes.)
 - Full task management support (abort, LUN reset, target reset, etc.)
 - Support for multiple ports
 - Support for multiple simultaneous initiators
 - Support for multiple simultaneous backing stores
 - Persistent reservation support
 - Mode sense/select support
 - Error injection support
 - High Availability support (1)
 - All I/O handled in-kernel, no userland context switch overhead.

(1) HA Support is just an API stub, and needs much more to be fully
    functional.

ctl.c:			The core of CTL.  Command handlers and processing,
			character driver, and HA support are here.

ctl.h:			Basic function declarations and data structures.

ctl_backend.c,
ctl_backend.h:		The basic CTL backend API.

ctl_backend_block.c,
ctl_backend_block.h:	The block and file backend.  This allows for using
			a disk or a file as the backing store for a LUN.
			Multiple threads are started to do I/O to the
			backing device, primarily because the VFS API
			requires that to get any concurrency.

ctl_backend_ramdisk.c:	A "fake" ramdisk backend.  It only allocates a
			small amount of memory to act as a source and sink
			for reads and writes from an initiator.  Therefore
			it cannot be used for any real data, but it can be
			used to test for throughput.  It can also be used
			to test initiators' support for extremely large LUNs.

ctl_cmd_table.c:	This is a table with all 256 possible SCSI opcodes,
			and command handler functions defined for supported
			opcodes.

ctl_debug.h:		Debugging support.

ctl_error.c,
ctl_error.h:		CTL-specific wrappers around the CAM sense building
			functions.

ctl_frontend.c,
ctl_frontend.h:		These files define the basic CTL frontend port API.

ctl_frontend_cam_sim.c:	This is a CTL frontend port that is also a CAM SIM.
			This frontend allows for using CTL without any
			target-capable hardware.  So any LUNs you create in
			CTL are visible in CAM via this port.

ctl_frontend_internal.c,
ctl_frontend_internal.h:
			This is a frontend port written for Copan to do
			some system-specific tasks that required sending
			commands into CTL from inside the kernel.  This
			isn't entirely relevant to FreeBSD in general,
			but can perhaps be repurposed.

ctl_ha.h:		This is a stubbed-out High Availability API.  Much
			more is needed for full HA support.  See the
			comments in the header and the description of what
			is needed in the README.ctl.txt file for more
			details.

ctl_io.h:		This defines most of the core CTL I/O structures.
			union ctl_io is conceptually very similar to CAM's
			union ccb.

ctl_ioctl.h:		This defines all ioctls available through the CTL
			character device, and the data structures needed
			for those ioctls.

ctl_mem_pool.c,
ctl_mem_pool.h:		Generic memory pool implementation used by the
			internal frontend.

ctl_private.h:		Private data structres (e.g. CTL softc) and
			function prototypes.  This also includes the SCSI
			vendor and product names used by CTL.

ctl_scsi_all.c,
ctl_scsi_all.h:		CTL wrappers around CAM sense printing functions.

ctl_ser_table.c:	Command serialization table.  This defines what
			happens when one type of command is followed by
			another type of command.

ctl_util.c,
ctl_util.h:		CTL utility functions, primarily designed to be
			used from userland.  See ctladm for the primary
			consumer of these functions.  These include CDB
			building functions.

scsi_ctl.c:		CAM target peripheral driver and CTL frontend port.
			This is the path into CTL for commands from
			target-capable hardware/SIMs.

README.ctl.txt:		CTL code features, roadmap, to-do list.

usr.sbin/Makefile:	Add ctladm.

ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c:		ctladm(8) is the CTL management utility.
			It fills a role similar to camcontrol(8).
			It allow configuring LUNs, issuing commands,
			injecting errors and various other control
			functions.

usr.bin/Makefile:	Add ctlstat.

ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c:	ctlstat(8) fills a role similar to iostat(8).
			It reports I/O statistics for CTL.

sys/conf/files:		Add CTL files.

sys/conf/NOTES:		Add device ctl.

sys/cam/scsi_all.h:	To conform to more recent specs, the inquiry CDB
			length field is now 2 bytes long.

			Add several mode page definitions for CTL.

sys/cam/scsi_all.c:	Handle the new 2 byte inquiry length.

sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c:	Update for 2 byte inquiry length field.

scsi_da.h:		Add versions of the format and rigid disk pages
			that are in a more reasonable format for CTL.

amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC:	Add device ctl.

i386/conf/PAE:		The CTL frontend SIM at least does not compile
			cleanly on PAE.

Sponsored by:	Copan Systems, SGI and Spectra Logic
MFC after:	1 month
2012-01-12 00:34:33 +00:00
nwhitehorn
190bd9f097 Farewall, sysinstall! You served us well for many years, but 10.0 is one
digit beyond your time.

Various sysinstall dependencies (e.g. libftpio, libdisk, libodialog, etc.)
will be cleaned up in coming days. Some will take longer than others due to
a few other consumers (tzsetup and sade).
2011-10-03 15:13:09 +00:00
dougb
5f3a3207a0 The named.reload script is no longer useful in the age of rc.d 2011-07-18 08:10:49 +00:00
hrs
0796dbc180 - Improve interface list handling. The rtadvd(8) now supports dynamically-
added/removed interfaces in a more consistent manner and reloading the
  configuration file.

- Implement burst unsolicited RA sending into the internal RA timer framework
  when AdvSendAdvertisements and/or configuration entries are changed as
  described in RFC 4861 6.2.4.  This fixes issues that make termination of the
  rtadvd(8) daemon take very long time.

  An interface now has three internal states, UNCONFIGURED, TRANSITIVE, or
  CONFIGURED, and the burst unsolicited sending happens in TRANSITIVE.
  See rtadvd.h for the details.

- rtadvd(8) now accepts non-existent interfaces as well in the command line.

- Add control socket support and rtadvctl(8) utility to show the RA information
  in rtadvd(8).  Dumping by SIGUSR1 has been removed in favor of it.
2011-07-17 19:24:54 +00:00
dougb
264979c9d1 bmake and other updates necessary for the BIND 9.8.x upgrade.
This includes a structural change regarding atomic ops. Previously they
were enabled on all platforms unless we had knowledge that they did not
work. However both work performed by marius@ on sparc64 and the fact that
the 9.8.x branch is fussier in this area has demonstrated that this is
not a safe approach. So I've modified a patch provided by marius to
enable them for i386, amd64, and ia64 only.
2011-07-16 11:20:54 +00:00
hrs
cdcbea6ad2 - Refactoring the interface list. It now supports dynamically
added/removed interfaces in a more consistent manner and reloading
  the configuration file.

- Add initial support for control socket.  RA information in the
  daemon can be obtained by rtadvctl(8) instead of SIGUSR1 in a similar
  manner to ifconfig(8).  The information dump has been removed in favor of it.

  (reload the configuration file)
  # rtadvctl reload

  (show RA messages being sent on each interfaces)
  # rtadvctl show
  em0: flags=<UP,CONFIGURED,PERSIST> status=<RA_SEND> mtu 1280
        DefaultLifetime: 30m
        MinAdvInterval/MaxAdvInterval: 3m20s/3m20s
        AdvLinkMTU: <none>, Flags: O, Preference: medium
        ReachableTime: 0s, RetransTimer: 0s, CurHopLimit: 64
        AdvIfPrefixes: yes

  (show RA messages being sent only on em0)
  # rtadvctl show em0

  (rtadvctl -v show provides additional information)
  # rtadvctl -v show em0
  em0: flags=<UP,CONFIGURED,PERSIST> status=<RA_SEND> mtu 1280
        DefaultLifetime: 30m
        MinAdvInterval/MaxAdvInterval: 3m20s/3m20s
        AdvLinkMTU: <none>, Flags: O, Preference: medium
        ReachableTime: 0s, RetransTimer: 0s, CurHopLimit: 64
        AdvIfPrefixes: yes
        Prefixes (1):
          2001:db8:1::/64 (CONFIG, vltime=30d, pltime=7d, flags=LA)
        RDNSS entries:
          2001:db8:1::128 (ltime=2m40s)

  (stop rtadvd)
  # rtadvctl shutdown

  A remaining issue when reloading the configuration file is that
  during that period rtadvd cannot communicate with rtadvctl due to some
  additional RA sending for graceful shutdown.  This will be fixed later.
2011-07-14 10:09:58 +00:00
ed
e75cd7ae0e Add WITHOUT_UTMPX switch to the build system.
This knob removes the tools that are exclusively used to view and
maintain the databases maintained by utmpx, namely last, users, who,
wtmpcvt, ac, lastlogin and utxrm.

The tool w is not in this list, because it has some other functionality
which is unrelated to utmpx; it is hardlinked to the uptime tool.
2011-06-17 21:30:21 +00:00
ed
61d0bc9ccd Don't omit ac(8) as part of WITHOUT_ACCT.
The WITHOUT_ACCT switch is supposed to omit tools related to process
accounting, namely accton and sa. ac(8) is just a simple tool that
prints statistics based on data in the utx.log database. It has nothing
to do with the former.
2011-06-17 20:47:44 +00:00
hselasky
57f20b6d96 - Include usbdump into default build.
MFC after:	7 days
Approved by:	thompsa (mentor)
2011-04-03 22:36:40 +00:00
ed
ea4dbdacd2 Add a utility, utxrm(8).
Most of the ports I broke when I imported utmpx, were simple management
utilities for the utmp database, allowing you to add/remove entries
manually.

Add a small tool called utxrm(8), which allows you to remove an entry
from the utmpx database by hand. This is useful when a login daemon
crashes or fails to remove the entry during shutdown.
2011-02-19 11:44:04 +00:00
nwhitehorn
b35b3cdb71 Import bsdinstall. This is meant to be (eventually in conjunction with
pc-sysinstall) a replacement for sysinstall in the 9.0 release and beyond.
Currently supported platforms are sparc64, pc98, i386, amd64, powerpc, and
powerpc64. Integration into the build system will occur in the coming
weeks.

Merging with pc-sysinstall will use this code as a frontend, while
temporarily retaining the interactive partition editor here. This work
will be done in parallel with improvements on this code and release
integration.

Thanks to all who have provided testing and comments!
2011-02-18 14:54:34 +00:00
uqs
93e0f8ac14 Put string in quotes, like is done everywhere. 2010-11-06 15:04:48 +00:00
gonzo
4d0a93a2e1 - Introduce WITH_GPIO knob and disable building gpioctl
by default. Most systems do not need it.
2010-10-05 21:19:20 +00:00
antoine
7f3563b193 Reconnect uathload to the build. 2010-10-03 20:09:19 +00:00
gonzo
6c4ac44822 Add gpioctl(8). Utility for configuring/accessing GPIO pins 2010-09-28 03:28:20 +00:00
imp
daef7a5626 Merge from tbemd: use Makefile.arch to control building.
Reviewed by:	arch@ (many times, no objection)
2010-09-13 02:21:07 +00:00
imp
e25569777f Make sure TARGET_ABI is defined. TARGET_ABI will die a horrible death
after we get all of TBEMD merged back into head, and make mips64 imply
n64, so don't bother to make this 100% pretty.  You'll have to settle
for only 64% pretty.
2010-08-26 15:49:52 +00:00
imp
61dc20268c Ugly kludge to paper over some kind of ld bug and/or misuse: don't
build uathload on mips n64 either.
2010-08-26 05:25:51 +00:00
nwhitehorn
405d766541 Build some powerpc-specific utilities on powerpc64 as well.
Submitted by:	Andreas Tobler
2010-07-20 07:27:36 +00:00
imp
25b9228f86 Bring in Kris Moore's pc-sysinstall shell script from PC-BSD. This
shell script is the back end logic necessary for an installer.  It
contains both query routines to allow a front-end installer to present
reasonable choices to the user and also action routines which allow
the front end installer to put a FreeBSD distribution onto a disk.  It
supports installing onto the usual suspects, as well as advanced
features like Mirroring, ZFS, Encryprion and GPT labels.

While this is only the back-end of the installer, it can do unattended
scripted installations.  In PC-BSD's world view, all installations are
scripted and all the front-end does is write the script.  As such, it
is useful in its own right.

This has been extensively tested over the past several releases of
PC-BSD.  However, differences between that environment and FreeBSD
suggest there will be a period of shake-out while those differences
are discovered and corrected.

A text-based front-end is in the works.  For the GUI-based front-end,
you can use the PC-BSD distribution.

Kris' BSDcan paper on pc-sysinstall is linked off his talk on the
BSDcan site:
	http://www.bsdcan.org/2010/schedule/events/173.en.html

The man page is written by Josh Paetzel, and I wrote the Makefiles for
the FreeBSD integration.  Kris wrote the rest.

This represents version r7010 in the PC-BSD repo.
http://svn.pcbsd.org/pcbsd/current/pc-sysinstall

Submitted by:	kris@
Sponsored by:	iX Systems
2010-06-24 22:21:47 +00:00
raj
98ef42faa8 Enable ofwdump(8) on ARM as this is a useful tool to inspect a flattened
device tree.
2010-06-13 13:30:26 +00:00
jkim
af364f655a Add a new build option, MAN_UTILS. This option lets you control building
utilities and related support files for manual pages, which were previously
controlled by MAN.  For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS.  This patch
is slightly improved by me from:

PR:		misc/145212
2010-05-19 23:56:26 +00:00
ume
86fb8e4f3f services_mkdb; generate db file from services(5) to increase
speed of getserv*()

Obtained from:	NetBSD
MFC after:	2 weeks
2010-04-04 08:38:14 +00:00
imp
c8b1846a53 We don't need to note that mkproto is missing anymore. It is
definitely OBE in a number of ways, and likely should have been
removed in 2000, not 2010.
2010-04-01 17:04:37 +00:00
imp
c0fe6aeb10 moused is useful even without usb, so remove comment asking if it is. 2010-03-04 20:31:49 +00:00
yongari
9d1af239b1 Connect smbfs related libraries and tool on sparc64.
Reviewed by:	marius
2010-01-25 18:52:47 +00:00
thompsa
38619cd970 Add a driver by Fredrik Lindberg for Option HSDPA USB devices. These differ
from standard 3G wireless units by supplying a raw IP/IPv6 endpoint rather than
using PPP over serial. uhsoctl(1) is used to initiate and close the WAN
connection.

Obtained from:	Fredrik Lindberg <fli@shapeshifter.se>
2010-01-13 03:16:31 +00:00
dougb
4f0465b170 The service command is an easy interface to the rc.d system.
Its primary purpose is to start and stop services provided by
the rc.d scripts, however it can also be used to list the scripts
using various criteria.
2009-12-20 01:34:12 +00:00
jkim
6f26f72e08 Copy apm(4) emulation from sys/i386/acpica/acpi_machdep.c and
install apm(8) and apm_bios.h on amd64.
2009-09-27 14:00:16 +00:00
scottl
485a598922 Add mptutil, a basic utility for managing MPT SCSI/SATA/SAS controllers.
Drive and controller status can be reported, basic attributes changed,
and arrays and spares can be created and deleted.

Approved by:	re
Obtained from:	Yahoo! Inc.
2009-08-14 13:13:12 +00:00
scottl
f0c0cd58a9 ntroduce mfiutil, a basic utility for managing LSI SAS-RAID & Dell PERC5/6
controllers.  Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.

This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality.  However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.

Approved by:    re
Obtained from:  Yahoo! Inc.
2009-08-13 23:18:45 +00:00
mbr
92b2f15118 Add wake, a tool to send Wake on LAN frames to hosts on a local Ethernet network
Submitted by:   Marc Balmer <marc@msys.ch>
Reviewed by:    rwatson
Approved by:	re

M    usr.sbin/Makefile
A    usr.sbin/wake
AM   usr.sbin/wake/wake.c
AM   usr.sbin/wake/Makefile
AM   usr.sbin/wake/wake.8
2009-06-30 18:51:22 +00:00
dougb
1e9abbf9ca Update BIND to version 9.6.1rc1. This version has better performance and
lots of new features compared to 9.4.x, including:

	Full NSEC3 support
	Automatic zone re-signing
	New update-policy methods tcp-self and 6to4-self
	DHCID support.
	More detailed statistics counters including those supported in BIND 8.
	Faster ACL processing.
	Efficient LRU cache-cleaning mechanism.
	NSID support.
2009-05-31 05:42:58 +00:00
rmacklem
2864c5d543 Add two new utilities and two new daemons to /usr/src/usr.sbin that
are specifically used by the experimental nfsv4 subsystem.
  nfscbd - The NFSv4 client callback daemon.
  nfsuserd - The NFSv4 daemon that maps between user and group name
           and their corresponding uid/gid numbers.
  nfsdumpstate - A utility that dumps out the NFSv4 Open/Lock state.
  nfsrevoke - Administratively revokes an NFSv4 client, releasing all
           NFSv4 Open/Lock state it holds on the server.

Approved by:	kib (mentor)
2009-05-26 15:19:04 +00:00
rwatson
aaa8443bf2 Garbage collect raycontrol(8), as ray(4) has been removed.
Pointed out by:	pluknet at gmail.com
2009-04-16 14:43:59 +00:00
ru
6ab30b8e7c Removed more vestiges of if_sl(4). 2009-04-09 12:20:37 +00:00
weongyo
87601c01d2 block build of uathload on ia64 temporarily because binutils expects
machine-specific flags to match but ar5523.bin doesn't have.

Pointed by:	marcel
2009-04-08 03:53:20 +00:00
weongyo
32d7e7cf1f Hook uathload up to the build. It's used for loading the firmware for
uath(4).
2009-04-07 01:58:29 +00:00
ed
36d960175a Remove if_ppp(4) and if_sl(4).
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).

If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.

Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
                lists.
2009-04-05 22:08:18 +00:00
thompsa
44cdb003f7 Move usb to a graveyard location under sys/legacy/dev, it is intended that the
new USB2 stack will fully replace this for 8.0.

Remove kernel modules, a subsequent commit will update conf/files. Unhook
usbdevs from the build.
2009-02-23 18:16:17 +00:00