Silence a Coverity warning about 'windowSize' being uninitialized.
(Yes, nothing that calls this routine actually uses the windowSize
value. Still, appeasing Coverity is pretty harmless in this case.)
Reported by: Coverity
Reviewed by: Yann Collet
Obtained from: zstd 606374269cf3485972c90b993fbb84dc20da032f
Sponsored by: Dell EMC Isilon
Rename ACPI_IVRS_HARDWARE_NEW to ACPI_IVRS_HARDWARE_EFRSUP, since new definitions add Extended Feature Register support. Use IvrsType to distinguish three types of IVHD - 0x10(legacy), 0x11 and 0x40(with EFR). IVHD 0x40 is also called mixed type since it supports HID device entries.
Fix 2 coverity bugs reported by cem.
Reported by:jkim, cem
Approved by:grehan
Differential Revision://reviews.freebsd.org/D14501
Defaulting to CK_MD_RMO has the unfortunate side effect of generating
memory barriers that are useless on those arches, and the even more
unfortunate side effect of generating lfence/sfence/mfence on i386, even
if older CPUs don't support it.
This should fix the panic reported when using IPFW on a Pentium 3.
Note that mfence and sfence might still be used in a few case, but that
shouldn't happen in FreeBSD right now, and should be fixed upstream first.
MFC after: 1 week
IVRS can have entry of type legacy and non-legacy present at same time for same AMD-Vi device. ivhd driver will ignore legacy if new IVHD type is present as specified in AMD-Vi specification. Earlier both of IVHD entries used and two ivhd devices were created.
Add support for new IVHD type 0x11 and 0x40 in ACPI. Create new struct of type acpi_ivrs_hardware_new for these new type of IVHDs. Legacy type 0x10 will continue to use acpi_ivrs_hardware.
Reviewed by: avg
Approved by: grehan
Differential Revision:https://reviews.freebsd.org/D13160
The definitions otherwise leak into anything that includes zstd.h,
which is not desirable for native FreeBSD code.
Reviewed by: allanjude, cem, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14352
Mechanically replace uses of MALLOC/FREE with appropriate invocations of
malloc(9) / free(9) (a series of sed expressions). Something like:
* MALLOC(a, b, ... -> a = malloc(...
* FREE( -> free(
* free((caddr_t) -> free(
No functional change.
For now, punt on modifying contrib ipfilter code, leaving a definition of
the macro in its KMALLOC().
Reported by: jhb
Reviewed by: cy, imp, markj, rmacklem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14035
libfdt highlights since 1.4.3:
- fdt_property_placeholder added to create a property without specifying its
value at creation time
- stringlist helper functions added to libfdt
- Improved overlay support
- Various internal cleanup
Also switch stand/fdt over to using libfdt for overlay support with this
update. Our current overlay implementation works only for limited use cases
with overlays generated only by some specific versions of our dtc(1). Swap
it out for the libfdt implementation, which supports any properly generated
overlay being applied to a properly generated base.
This will be followed up fairly soon with an update to dtc(1) in tree to
properly generate overlays.
MFC note: the <stdlib.h> include this update introduces in libfdt_env.h is
apparently not necessary in the context we use this in. It's not immediately
clear to me the motivation for it being introduced, but it came in with
overlay support. I've left it in for the sake of accuracy and because it's
not harmful here on HEAD, but MFC'ing this to stable/11 will require
wrapping the #include in an `#ifndef _STANDALONE` block or else it will
cause build failures.
Tested on: Banana Pi-M3 (ARMv7)
Tested on: Pine64 (aarch64)
Tested on: PowerPC [nwhitehorn]
Reviewed by: manu, nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13893
This is in contrib code but since we only have mallocarray(9) in current
we will not upstream this.
This effectively brings back r327934, which was reverted to correct the
log message.
Add an implementation of the intrinsics invoked by __builtin_ctz{,ll} and
__builtin_clz{,ll}, and include this compilation unit on platforms that lack
assembly intrinsics for those builtins (MIPS and RISC-V).
Future cleanup work might involve bringing these into a mini libcompiler-rt
for the standalone kernel environment. Or cleaning up the approach upstream
takes for builtins in standalone environments (or just FreeBSD). For now,
at least this builds, and doesn't require modifying the vendor code.
Reported by: jeff, markj, mizhka
Reviewed by: jhb (earlier version), rpokala (comment text earlier version)
Sponsored by: Dell EMC Isilon
that was not allocated will be accessed.
This necessitated refactoring state seed allocation from
ipf_state_soft_init() into a new common ipf_state_seed_alloc() function
as it is now also used by ipf_state_rehash() when changing the size of
the state hash table in addition to by ipf_state_soft_init() during
initialization.
According to Christos Zoulas <christos@NetBSD.org>:
The bug was encountered by a NetBSD vendor who's customer machines had
large ipfilter states. The bug was reliably triggered by resizing the
state variables using "ipf -T".
Submitted by: Christos Zoulas <christos@NetBSD.org>
Reviewed by: delphij, rgrimes
Obtained from: NetBSD ip_state.c CVS revs r1.9 and r1.10
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13755
Mock userspace headers and include mocked headers first in compilation
command to inject kernel headers and override e.g., malloc(3) with
malloc(9).
Submitted by: allanjude
Reviewed by: imp (earlier version), bapt (earlier version)
Differential Revision: https://reviews.freebsd.org/D10407
This change was made to allow zstd(1) to be a dropin replacement for gzip(1) and
friends, allowing easy integration, in particular with newsyslog(8). At the
price of having a zstd(1) command which by default behaves differently than what
upstream default, confusing users.
newsyslog(8) has been adapted to now be more flexible in what it accepts as
compression program, so we can switch back zstd(1) to its default behaviour
Reported by: many
The existing check of the GCC version number is not sufficient
This fixes the build on sparc64 in preparation for integrating ZSTD into
the kernel for ZFS and Crash Dumps.
plain-vanilla ETH microcode. The QOS_VLAN firmware added support in microcode
for handling IEEE 802.1q tags, but the npe(4) driver did not actually
support the relevant signalling. As a result, it was impossible to use
VLANs with npe(4). Switching to the more basic microcode (same license)
removes the on-NIC promisisng and makes vlan(4) work on both NPE interfaces.
Ref: https://lists.freebsd.org/pipermail/freebsd-arm/2012-August/003826.html
In addition to some small style fixes to the ARMv6 vDSO, this release
includes a new vDSO that can be used for the execution of ARMv6/ARMv7
code on 64-bit platforms.
Just like for i686 on x86-64, this new vDSO is responsible for padding
arguments and return values to 64-bit values, so that the kernel can
easily forward system calls to the native system calls.
Obtained from: https://github.com/NuxiNL/cloudabi
link-local addresses when VIMAGE is enabled will cause a so-called NULL
pointer dereferencing issue.
Sponsored by: Mellanox Technologies
MFC after: 1 week
The driver was printing out a lot of information upon failure, which
does not have to be interested for the user.
Changing logging level required to rebuild driver with proper flags. The
proper sysctl was added, so the level now can be changed dynamically
using bitmask.
Levels of printouts were adjusted to keep on mind end user instead of
debugging purposes.
More verbose messages were added to align the driver with the Linux.
Fix building error introduced by the r325506 by casting csum_flags to
uint64_t.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12868
Compared to the previous version, v0.16, there are a couple of minor
changes:
- CLOUDABI_AT_PID: Process identifiers for CloudABI processes.
Initially, BSD process identifiers weren't exposed inside the runtime,
due to them being pretty much useless inside of a cluster computing
environment. When jobs are scheduled across systems, the BSD process
number doesn't act as an identifier. Even on individual systems they
may recycle relatively quickly.
With this change, the kernel will now generate a UUIDv4 when executing
a process. These UUIDs can be obtained within the process using
program_getpid(). Right now, FreeBSD will not attempt to store this
value. This should of course happen at some point in time, so that it
may be printed by administration tools.
- Removal of some unused structure members for polling.
With the polling framework being simplified/redesigned, it turns out
some of the structure fields were not used by the C library. We can
remove these to keep things nice and tidy.
Obtained from: https://github.com/NuxiNL/cloudabi
The newest ena-com HAL supports LLQv2 and introduces
API changes. In order not to break the driver compilation
it was updated/fixed in a following way:
* Change version of the driver to 0.8.0
* Provide reset cause when triggering reset of the device
* Reset device after attach fails
* In the reset task free management irq after calling ena_down. Admin
queue can still be used before ena_down is called, or when it is
being handled
* Do not reset device if ena_reset_task fails
* Move call of the ena_com_dev_reset to the ena_down() routine - it
should be called only if interface was up
* Use different function for checking empty space on the sq ring
(ena-com API change)
* Fix typo on ENA_TX_CLEANUP_THRESHOLD
* Change checking for EPERM with EOPNOTSUPP - change in the ena-com API
* Minor style fixes
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Amazon.com, Inc.
Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12143
Rework the dTSEC and FMan drivers to be more like a full bus relationship,
so that dtsec can use bus_alloc_resource() instead of trying to handle the
offset from the dts. This required taking some code from the sparc64 ebus
driver to allow subdividing the fman region for the dTSEC devices.
This adds some support for ARM as well as 64-bit. 64-bit on PowerPC is
currently not working, and ARM support has not been completed or tested on the
FreeBSD side.
As this was imported from a Linux tree, it includes some Linux-isms
(ioread/iowrite), so compile with the LinuxKPI for now. This may change in the
future.
