We should never end up executing the inter-function padding, so we
are better off faulting than silently carrying on to whatever function
happens to be next.
Note that LLD will soon do this by default (although it currently pads
with zeros).
Reviewed by: dim, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10047
The rfdi instruction is part of the e500mc and derivative cores. It came into
binutils in a GPLv3 patch, along with the rest of the e500mc instruction set.
Currently only rfdi is planned to be used, so rather than attempt to backport
the full patch, take a surgical route and add instructions as needed.
MFC after: 2 weeks
In r208737 jmallett@ added support for the "mips64r2" architecture
and "octeon" CPU, and the saa/saad instructions.
Upstream binutils also added the "octeon+" CPU, and the saa/saad
instructions are only available in octeon+, not octeon. Since our
base system tool chain already accepts saa/saad with -march=octeon,
just allow octeon+ as an alias.
This allows the use of octeon+ in kernel config files, for use with both
external tool chain and in-tree GCC/binutils.
PR: 216516
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Initialize l_sec_contents to make sure that free(l_sec_contents) is called
on valid pointers.
Obtained from: OpenBSD (partial CVS rev 1.18)
MFC after: 5 days
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
The partition_name field is an array, so can never be NULL itself. Check only
the first byte instead.
This was found when test building with clang, but I'm not sure how it passes
gcc's warnings either.
libiberty currently defines the prototype for basename() itself instead
of using <libgen.h>. It still uses the BSD-style prototype instead of
the POSIX one, meaning that if FreeBSD would switch over to the POSIX
one, you wouldn't be able to use libiberty.h and libgen.h in a single
source file. It turns out that kgdb does this. Patch up libiberty to
just include <libgen.h>.
I'm currently talking to upstream to see whether we can come up with a
more complete solution that could be integrated, but for our
unmaintained copy of GDB in base, let's just apply the simplest
workaround possible.
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D6631
We normally use the binutils from ports but on other systems this
is required for building gcc 4.9.
Obtained from: OpenBSD (CVS rev. 1.5)
MFC after: 3 weeks
"invalid string offset 65521 >= 27261 for section `.strtab'". for object
files produced by recent versions of clang.
In BFD's elf_create_symbuf() function, the size of the symbol buffer
('ssymbuf') is not calculated correctly, and the initial value for the
'ssym' variable is off by one, since 'ssymbuf' has shndx_count + 1
members.
MFC after: 1 week
When the armv6 support was imported from a project branch, this complex
conditional logic and related #define'd values came along, but it's really
not clear what the intent of it all was. The effect, however, was that
OSABI was always set to zero, which is "UNIX System V ABI". Having the wrong
value there causes pkg(8) to avoid looking inside arm elf binaries to
determine shared-lib required/provides info for packaging.
entries. This fixes the segfaults in arm userland code compiled with
-march= or -mcpu= values that allow the compiler to generate movw/movt
sequences to load 32-bit constants.
however it will fail to output them if the type is not set correctly. This
can happen when it finds an attribute it hasn't seen before, for example
when building shared objects it will use the attributes from crti.o, hwever
this file has no attributes set.
Differential Revision: https://reviews.freebsd.org/D2413
Reviewed by: imp
to include the Unaligned Access and Floating-point Half-precision
attributes. the former marks ELF objects that may access ARMv6 style
unaligned data, the latter that the binary uses the VFPv3/Advanced SIMD
half-precision extension.
These may be emmitted by clang so it's best to print a warning when the
linker hits one of them.
Differential Revision: http://reviews.freebsd.org/D2194
Submitted by: Michal Meloun <meloun@miracle.cz>
MFC after: 1 week
bfd_dwarf2_find_line() calls find_line() with NULL functionname_ptr,
which resulted in a crash on certain ELF objects.
This change was implemented independently from upstream binutils, but
I have checked that the crash does not happen there.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
order as the .init_array section. Finalisation routines need to be called
in the opposite order as their corresponding initialisation routines but
rtld(1) handles that by calling the function pointers in .fini_array in
reverse order.
Reviewed by: kib
MFC after: 2 weeks
partial_where points into the buffer that begins with buffer_start
so we need to use memmove() to handle the overlap.
Sourceware-PR 11456.
Obtained from: OpenBSD (CVS rev. 1.2)
MFC after: 3 days
Corresponds to 727fc41e077139570ea8b8ddfd6c546b2a55627c.
This allows us to use -no-integrated-as with clang, if we prefer.
Obtained from: binutils-gdb (Relicensed from Alan Modra as GPLv2)
MFC after: 2 weeks
X-MFC-with: r275718
Summary:
LLVM/Clang generates relocations that our binutils doesn't understand, but newer
binutils does. I got permission from the author of a series of patches to
relicense them as GPLv2 for use in FreeBSD. The upstream git hashes are:
ac2df442ac7901f00af15b272fc48b594b433713
2b95367962dc14f69d3c338c4d54195266e2e169
102890f04c44b64cf5cef4588267dd9f24086ac7
b7fcf6f6bb53b5027e111107f5416769cb9a5798
1d483afedd5a628dc84fb58d1d570f79fdfbfa7b
90aecf7a80c1cefeb45fc10a6cd02c8338e34b4c
3a71aa26df2a372a58e9c11ef9ba51fd0e83320a
727fc41e077139570ea8b8ddfd6c546b2a55627c
With the import of clang 3.5, and a few backported patches, we should be able to
move powerpc and powerpc64 to clang-as-cc soon.
Test Plan: Passes make tinderbox, so no regressions. Binaries built with clang
run on powerpc64.
Reviewers: #committers, dim
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D1297
Obtained from: Alan Modra, upstream binutils-gdb git
MFC after: 3 weeks
Relnotes: yes
Otherwise, clang can effectively remove the first iteration of the for
loops where this macro is invoked, and as a result, "cmp r0, #99" fails
to assemble.
Obtained from: joerg at netbsd
MFC after: 3 days
- Dump an NT_X86_XSTATE note if XSAVE is in use. This note is designed
to match what Linux does in that 1) it dumps the entire XSAVE area
including the fxsave state, and 2) it stashes a copy of the current
xsave mask in the unused padding between the fxsave state and the
xstate header at the same location used by Linux.
- Teach readelf() to recognize NT_X86_XSTATE notes.
- Change PT_GET/SETXSTATE to take the entire XSAVE state instead of
only the extra portion. This avoids having to always make two
ptrace() calls to get or set the full XSAVE state.
- Add a PT_GET_XSTATE_INFO which returns the length of the current
XSTATE save area (so the size of the buffer needed for PT_GETXSTATE)
and the current XSAVE mask (%xcr0).
Differential Revision: https://reviews.freebsd.org/D1193
Reviewed by: kib
MFC after: 2 weeks
The powerpc support was the only supported architecture not prepending the elf format name
with "-freebsd" in base this change makes it consistent with other architectures.
On newer version of binutils the powerpc format is also prepended with "-freebsd".
Also modify the kernel ldscripts in that regards.
As a result it is now possible cross build the kernel on powerpc using newer binutils
Differential Revision: https://reviews.freebsd.org/D926
Differential Revision: https://reviews.freebsd.org/D928
names that must nnot be adjusted. This fixes a bug where code such as:
movw r2, :lower16:symbol
movt r2, :upper16:symbol
It is common for clang to generate such code when targeting armv7.
including an alignment. Previously binutils would only allow instructions
in the form "vld1.64 {d0, d1}, [r0, :128]" where the final comma should
not be there, instead the above instruction should be
"vld1.64 {d0, d1}, [r0:128]".
This change duplicates the alignment code from within the function to
handle this case.
