Remove from legacy ata(4) driver support for hardware, supported by newer
and more functional drivers ahci(4), siis(4) and mvs(4).
This removes about 3400 lines of code, unused since FreeBSD 9.0 release.
r286338:
cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The
changes in the firmwares since 1.11.27.0 are listed here (straight copy-paste
from the "Release Notes.txt" accompanying the Chelsio Unified Wire 2.11.1.0
release on the website).
22.1. T5 Firmware
+++++++++++++++++++++++++++++++++
Version : 1.14.4.0
Date : 08/05/2015
================================================================================
FIXES
-----
BASE:
- Fixes a potential data path hang by properly programming PMTX congestion
threshold settings.
- Fixes a potential initialization error when accessing a configuration file
stored on the flash.
- Fixes a regression where SGE resources can be miss-sized if iWARP is disabled.
ETH:
- Fixes a timing issue that would prevent CR4 links from coming up with some
switches.
FOFCoE:
- Defers fcoe linkdown mailbox command handling till LOGO is sent.
- Updates vlan prio for all outstanding IOs during dcbx update.
ENHANCEMENTS
------------
BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.
ETH:
- Enhances segmentation offload to include VxLAN and Geneve.
- Adds PTP support.
- Adds new interface to allow the driver to query the VI rss table base
addresses.
- Allows the driver to program the SGE ingrext contxt CongDrop field.
OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
and rcv scale factors.
iSCSI:
- Adds support for iscsi segmentatation offload (ISO).
- Adds support for iscsi t10-dif offload.
FOiSCSI:
- Sets FORCE_BIT for cut through processing for FOiSCSI.
FOFCoE:
- Adds support for FCoE BB6.
- Improves WRITE performance.
================================================================================
================================================================================
Version : 1.13.32.0
Date : 03/25/2015
================================================================================
FIXES
-----
BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
adapter configurations)
- Fixes config file based PL_TIMEOUT register programming
ETH:
- Fixes a potential EO UDP SEG header corruption
- Fixes an issue where 1000Base-X was not enabled correctly when using QSA
modules
OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1
FOFCoE:
- Fixes fcoe xchg leaks in linkdown/peer down path
- Fixes cleanup in FCoE linkdown and fixed buf timer flowid abuse
- Fixes fw crash by clearing fcf flowc during bye
FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.
ENHANCEMENTS
------------
BASE:
- Adds support for VFs on PFs 4 to 7
- Adds support for QPs/CQs on any physical and virtual function
ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE
- Adds support for CR4 links (BEAN/AEC on 40G TwinAx cables)
OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software
FOISCSI:
- Adds IPv6 support for foiscsi. Keeps backward compatibility with
old foiscsi drivers which doesn't support ipv6.
FOFCoE:
- Added fcoe debug support in flowc dump
================================================================================
================================================================================
Version : 1.12.25.0
Date : 10/22/2014
================================================================================
FIXES
-----
BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Fixes an issue where the link would intermittently fail to come up
- Fixes an issue where adapters with an external PHY couldn't run at 100Mbps
- Fixes an issue where active optical cables were not recognized
- Fixes link advertising issues on T520-BT (speed and pause frames) that would
cause the link to negotiate unexpected settings
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested
ETH:
- Fixes NVGRE Segmentation Offload network header generation.
DCBX:
- Fixes an issue where some settings were not being sent to the switch
correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
FW
- Fixes a firmware crash on DCBX APP information request before link up
FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT
ENHANCEMENTS
-------------
BASE:
- Adds link partner settings reporting when available
- Adds QSA support (in conjunction with QSA VPD)
- Adds T520-BT LED support
- Reports NOTSUPPORTED for modules with an unhandled identifier
DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs
FOiSCSI:
- Add support for multiple iSCSI DDP client
- Sends DHCP renew request when lease expires
================================================================================
22.2. T4 Firmware
+++++++++++++++++
Version : 1.14.4.0
Date : 08/05/2015
================================================================================
FIXES
-----
BASE:
- Fixes a potential initialization error when accessing a configuration file
stored on the flash.
- Initialize PCIE_DBG_INDIR_REQ.Enable to 0, as hardware failed to do so and
register dumps could result in errors.
ETH:
- Fixes an issue that sometimes prevented the link from coming up in CR adapters.
ENHANCEMENTS
------------
BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.
ETH:
- Adds new interface to allow the driver to query the VI rss table base
addresses.
OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
and rcv scale factors.
================================================================================
================================================================================
Version : 1.13.32.0
Date : 03/25/2015
================================================================================
FIXES
-----
BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
adapter configurations)
- Fixes config file based PL_TIMEOUT register programming
ETH:
- Fixes a potential EO UDP SEG header corruption
OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1
FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.
ENHANCEMENTS
------------
ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE
OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software
================================================================================
================================================================================
Version : 1.12.25.0
Date : 10/22/2014
================================================================================
FIXES
-----
BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested
DCBX:
- Fixes an issue where some settings were not being sent to the switch
correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
FW
- Fixes a firmware crash on DCBX APP information request before link up
FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT
ENHANCEMENTS
------------
BASE:
- Adds link partner settings reporting when available
- Firmware now reports NOTSUPPORTED for modules with an unhandled identifier
DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs
FOiSCSI:
- Adds support for multiple iSCSI DDP clients
- Sends DHCP renew request when lease expires
================================================================================
Obtained from: Chelsio Communications
Sponsored by: Chelsio Communications
Add kern.racct.enable tunable and RACCT_DISABLED config option.
The point of this is to be able to add RACCT (with RACCT_DISABLED)
to GENERIC, to avoid having to rebuild the kernel to use rctl(8).
MFC r282901:
Build GENERIC with RACCT/RCTL support by default. Note that it still
needs to be enabled by adding "kern.racct.enable=1" to /boot/loader.conf.
Note those two are MFC-ed together, because the latter one changes the
name of RACCT_DISABLED option to RACCT_DEFAULT_TO_DISABLED. Should have
committed the renaming separately...
Relnotes: yes
Sponsored by: The FreeBSD Foundation
marking the official start of the code slush.
Set the default mdoc(7) version to 10.2, and update the
clang(1) TARGET_TRIPLE and BUILD_TRIPLE to reflect 10.2.
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
sfxge: add 7xxx NICs family support
Support 7xxx adapters including firmware-assisted TSO and VLAN tagging:
- Solarflare Flareon Ultra 7000 series 10/40G adapters:
- Solarflare SFN7042Q QSFP+ Server Adapter
- Solarflare SFN7142Q QSFP+ Server Adapter
- Solarflare Flareon Ultra 7000 series 10G adapters:
- Solarflare SFN7022F SFP+ Server Adapter
- Solarflare SFN7122F SFP+ Server Adapter
- Solarflare SFN7322F Precision Time Synchronization Server Adapter
- Solarflare Flareon 7000 series 10G adapters:
- Solarflare SFN7002F SFP+ Server Adapter
Support utilities to configure adapters and update firmware.
The work is done by Solarflare developers
(Andy Moreton, Andrew Lee and many others),
Artem V. Andreev <Artem.Andreev at oktetlabs.ru> and me.
Sponsored by: Solarflare Communications, Inc.
Implement multiqueue (max 2 tx/rx queues) for the 82574L chipset.
Change default tuning parameters to handle this new configuration if
EM_MULTIQUEUE is set in the kernel configuration. Off by default.
See r283959 changelog for the scope of these changes.
Relnotes: Yes
Sponsored by: Limelight Networks
- Add vxlan interface
- Use the size of the Ethernet address, not the entire header, when
copying into forwarding entry.
- Prefix all the vxlan ifconfig commands so they are unique
Pass MODULES_EXTRA to the modules build. While I'm here, also always
pass WITHOUT_MODULES down. There's no need to make this conditional.
Properly quote EXTRA_MODULES and WITHOUT_MODULES to ensure that they
are passed down properly when there's more than one.
Overhaul if_gre(4).
Split it into two modules: if_gre(4) for GRE encapsulation and
if_me(4) for minimal encapsulation within IP.
gre(4) changes:
* convert to if_transmit;
* rework locking: protect access to softc with rmlock,
protect from concurrent ioctls with sx lock;
* correct interface accounting for outgoing datagramms (count only payload size);
* implement generic support for using IPv6 as delivery header;
* make implementation conform to the RFC 2784 and partially to RFC 2890;
* add support for GRE checksums - calculate for outgoing datagramms and check
for inconming datagramms;
* add support for sending sequence number in GRE header;
* remove support of cached routes. This fixes problem, when gre(4) doesn't
work at system startup. But this also removes support for having tunnels with
the same addresses for inner and outer header.
* deprecate support for various GREXXX ioctls, that doesn't used in FreeBSD.
Use our standard ioctls for tunnels.
me(4):
* implementation conform to RFC 2004;
* use if_transmit;
* use the same locking model as gre(4);
PR: 164475
MFC r274289 (by bz):
gcc requires variables to be initialised in two places. One of them
is correctly used only under the same conditional though.
For module builds properly check if the kernel supports INET or INET6,
as otherwise various mips kernels without IPv6 support would fail to build.
MFC r274964:
Add ip_gre.h to ObsoleteFiles.inc.
r277637, and r283149 (by emaste@).
r276485 is the real change here, the rest deal with the fallout of
mp_ring's reliance on 64b atomics.
Use the incorrectly spelled 'eigth' from struct pkthdr in this branch
instead of MFC'ing r261733, which would have renamed the field of a
public structure in a -STABLE branch.
---
r276480:
Temporarily unplug cxgbe(4) from !amd64 builds.
r276485:
cxgbe(4): major tx rework.
a) Front load as much work as possible in if_transmit, before any driver
lock or software queue has to get involved.
b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This
is specifically for the tx multiqueue model where one of the if_transmit
producer threads becomes the consumer and other producers carry on as
usual. mp_ring is implemented as standalone code and it should be
possible to use it in any driver with tx multiqueue. It also has:
- the ability to enqueue/dequeue multiple items. This might become
significant if packet batching is ever implemented.
- an abdication mechanism to allow a thread to give up writing tx
descriptors and have another if_transmit thread take over. A thread
that's writing tx descriptors can end up doing so for an unbounded
time period if a) there are other if_transmit threads continuously
feeding the sofware queue, and b) the chip keeps up with whatever the
thread is throwing at it.
- accurate statistics about interesting events even when the stats come
at the expense of additional branches/conditional code.
The NIC txq lock is uncontested on the fast path at this point. I've
left it there for synchronization with the control events (interface
up/down, modload/unload).
c) Add support for "type 1" coalescing work request in the normal NIC tx
path. This work request is optimized for frames with a single item in
the DMA gather list. These are very common when forwarding packets.
Note that netmap tx in cxgbe already uses these "type 1" work requests.
d) Do not request automatic cidx updates every 32 descriptors. Instead,
request updates via bits in individual work requests (still every 32
descriptors approximately). Also, request an automatic final update
when the queue idles after activity. This means NIC tx reclaim is still
performed lazily but it will catch up quickly as soon as the queue
idles. This seems to be the best middle ground and I'll probably do
something similar for netmap tx as well.
e) Implement a faster tx path for WRQs (used by TOE tx and control
queues, _not_ by the normal NIC tx). Allow work requests to be written
directly to the hardware descriptor ring if room is available. I will
convert t4_tom and iw_cxgbe modules to this faster style gradually.
r276498:
cxgbe(4): remove buf_ring specific restriction on the txq size.
r277225:
Make cxgbe(4) buildable with the gcc in base.
r277226:
Allow cxgbe(4) to be built on i386. Driver attach will succeed only on
a subset of i386 systems.
r277227:
Plug cxgbe(4) back into !powerpc && !arm builds, instead of building it
on amd64 only.
r277230:
Build cxgbe(4) on powerpc64 too.
r277637:
Make sure the compiler flag to get cxgbe(4) to compile with gcc is used
only when gcc is being used. This is what r277225 should have been.
Merge 278459,278460,278461,278462 which define DTBDIR and other things
needed for install to work. Although the commit in head kinda fixed
install_as_user, it's unknown if that works in 10.x (it didn't the last
time I tried).
- Move hwpmc(4) debugging code under a new HWPMC_DEBUG option instead of
the broader DEBUG option.
- Convert hwpmc(4) debug printfs over to KTR.
Sponsored by: Norse Corp, Inc.
- Re-introduce "device ixgbe" option for kernel configs. This allows
users to continue using existing kernel configurations, while still
letting if_ix and if_ixv exist to allow ifconfig magic to work.
Though the amd64 GENERIC config has "device ix" and "device ixv" instead of
"device ixgbe".
This is achieved by making the if_ixgbe module a stub that depends
on if_ix and if_ixv.
- Replace if_baudrate assignment with if_initbaudrate() call.
Thanks to jhb@ for the stub module suggestion and pointing out the if_baudrate
error.
Approved by: jfv (mentor)
Microsoft vmbus, storage and other related driver enhancements for HyperV.
- Vmbus multi channel support.
- Vector interrupt support.
- Signal optimization.
- Storvsc driver performance improvement.
- Scatter and gather support for storvsc driver.
- Minor bug fix for KVP driver.
Thanks royger, jhb and delphij from FreeBSD community for the reviews
and comments. Also thanks Hovy Xu from NetApp for the contributions to
the storvsc driver.
PR: 195238
Submitted by: whu
Reviewed by: royger
Approved by: royger
Relnotes: yes
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D2575
Add config option PAE_TABLES for the i386 kernel. It switches pmap to
use PAE format for the page tables, but does not incur other
consequences of the full PAE config. In particular, vm_paddr_t and
bus_addr_t are left 32bit, and max supported memory is still limited
by 4GB.
The option allows to have nx permissions for memory mappings on i386
kernel, while keeping the usual i386 KBI and avoiding the kernel data
sizing problems typical for the PAE config.
Drop experimental ext2fs dir_index support.
The htree directory index is a highly desirable feature for research
purposes and was meant to improve performance in our ext2/3 driver.
Unfortunately our implementation has two problems:
- It never really delivered any performance improvement.
- It appears to corrupt the filesystem in undetermined circumstances.
Strictly speaking dir_index is not required for read/write support in
ext2/3 and our limited ext4 support still works fine without it.
Regain stability in the ext2 driver by removing it. We may need it back
(fixed) if we want to support encrypted ext4 support but thanks to the
wonders of version control we can always revert this change and bring it
back.
PR: 191895
PR: 198731
PR: 199309
279573: Sync AHCI driver with HEAD.
Due to code reorganization in r271146 and many previous reordered merges it
is problematic to merge those revisions separately.
MFC support for PCI Alternate RID Interpretation. ARI is an optional PCIe
feature that allows PCI devices to present up to 256 functions on a bus.
This is effectively a prerequisite for PCI SR-IOV support.
r264007:
Add a method to get the PCI RID for a device.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264008:
Re-implement the DMAR I/O MMU code in terms of PCI RIDs
Under the hood the VT-d spec is really implemented in terms of
PCI RIDs instead of bus/slot/function, even though the spec makes
pains to convert back to bus/slot/function in examples. However
working with bus/slot/function is not correct when PCI ARI is
in use, so convert to using RIDs in most cases. bus/slot/function
will only be used when reporting errors to a user.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264009:
Re-write bhyve's I/O MMU handling in terms of PCI RID.
Reviewed by: neel
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264011:
Add support for PCIe ARI
PCIe Alternate RID Interpretation (ARI) is an optional feature that
allows devices to have up to 256 different functions. It is
implemented by always setting the PCI slot number to 0 and
re-purposing the 5 bits used to encode the slot number to instead
contain the function number. Combined with the original 3 bits
allocated for the function number, this allows for 256 functions.
This is enabled by default, but it's expected to be a no-op on currently
supported hardware. It's a prerequisite for supporting PCI SR-IOV, and
I want the ARI support to go in early to help shake out any bugs in it.
ARI can be disabled by setting the tunable hw.pci.enable_ari=0.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264012:
Print status of ARI capability in pciconf -c
Teach pciconf how to print out the status (enabled/disabled) of the ARI
capability on PCI Root Complexes and Downstream Ports.
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264013:
Add missing copyright date.
MFC after: 2 months
Split syscall handling out to a separate file.
Include sys/kernel.h to pick up the definition of hz in syscall.c
Add a new trap-v6.c which has support for all armv7 exceptions.
Put in a workaround for bug 196407 (arm modules cause crashes & panics).
(Don't allow movw/movt insn in modules.)
Fix alignment directives in arm asm code after clang 3.5 import.
Include acle-compat.h directly rather than getting it via sysreg.h.
Add new code to read and parse cpu identification data using the new CPUID
mechanism defined for armv7.
Add new TLB and cache maintainence functions for armv6 and armv7.
Eliminate an unused macro whose name clashes now with a function in the
new cpu-v6.h
Add cache maintenance functions which will be used by startup code to
initially set up the MMU.
Fix a "decl is not a prototype" error noticed by gcc (but not clang).
Update comments (r4 is not used anywhere), use non-profiling entry macros.
Add arm option ARM_NEW_PMAP, to allow us to begin adding the new pmap
code alongside the existing implementation
Add armv6 implementations of cache operations to avoid duplication
Move ofw_cpu.c to sys/dev/ofw so that it can be used by other
architectures.
Add driver for CPU frequency/voltage control on the Raspberry Pi.
On initialization, do not use bcm_mbox_intr() to read the pending messages.
This fixes the hang that happens on boot while initializing the cpufreq on
Raspberry Pi.
Optimise allocation of USB DMA structures. By default don't double map
allocations if only one element should be allocated per page
cache. Make one allocation per element compile time configurable. Fix
a comment while at it.
MFC r270443 (by mjg):
Properly reparent traced processes when the tracer dies.
MFC r273452 (by mjg):
Plug unnecessary PRS_NEW check in kern_procctl.
MFC 275800:
Add a facility for non-init process to declare itself the reaper of
the orphaned descendants.
MFC r275821:
Add missed break.
MFC r275846 (by mckusick):
Add some additional clarification and fix a few gammer nits.
MFC r275847 (by bdrewery):
Bump Dd for r275846.
Add ARMV6 as an arm option. This will cause obscure magic in config(8)
to automatically set the armv6 option when MACHINE_ARCH is armv6. That
allows replacing ever-growing lists of cpu names as options to compile
a given file with the using either "optional armv6" or "optional !armv6".
Overhaul if_gif(4):
o convert to if_transmit;
o use rmlock to protect access to gif_softc;
o use sx lock to protect from concurrent ioctls;
o remove a lot of unneeded and duplicated code;
o remove cached route support (it won't work with concurrent io);
o style fixes.
MFC r273090:
Move memset under ifdef INET6.
MFC r273091:
Add more ifdefs. SIOC*_IN6 are defined only with INET6.
MFC r273121:
Add inet/inet6 to the dependency list. Without them if_gif is useless.
MFC r273209 by bz:
After r273087,r273090,r273091,r273121 changes to gif(4) try to fix
NOIP builds for real.
MFC r273587:
Remove redundant check and m_pullup() call.
- Remove spaces from boot messages when we print the CPU ID/Family/Stepping
- Move prototypes for various functions into out of C files and into
<machine/md_var.h>.
- Reduce diffs between i386 and amd64 initcpu.c and identcpu.c files.
- Move blacklists of broken TSCs out of the printcpuinfo() function
and into the TSC probe routine.
- Merge the amd64 and i386 identcpu.c into a single x86 implementation.
