The latter needs the former, but with a multi-job build on a fast
machine, the race is sometimes lost. This leads to "ld: error: unable to
find library -lsbuf", when linking libgeom.so.
Submitted by: kevans
MFC after: 3 days
Store the attached regulator in a tailq to later find them in ofw_map.
While here, do not attempt to attach a regulator without a name, a node
might exists but if it doesn't have a name the regulator is unused.
MFC after: 1 month
In r326576 ("use @@@ instead of @@ in __sym_default"), an earlier version of
the phabricator-discussed patch was inadvertently committed. The commit
message claims that @@@ means that weak is not needed, but that was due to a
misunderstanding of the use of weak symbols in this context by the submitted
in the first draft of the patch; the description text was not updated to
match the discussion. As discussed in phabricator, weak is needed for
symbol interposing because of the behavior of our rtld, and is widely used
elsewhere in libc.
This partial revert restores the approved version of the patch and permits
symbol interposing for openat.
Reported by: Raymond Ramsden <rramsden AT isilon.com>
Reviewed by: dim, emaste, kib (2017)
Discussed with: kib (2020)
Differential Revision: https://reviews.freebsd.org/D11653
If pin is switched from fixed function to GPIO, it should have prepared
direction, pull-up/down and default value before function gets switched.
Otherwise we may produce unwanted glitch on output pin.
Right order of drive strength settings is questionable, but I think that
is slightly safer to do it also before function switch.
This fixes serial port corruption observed after DT 5.6 import.
MFC after: 1 week
This change is build on top of nexthop objects introduced in r359823.
Nexthops are separate datastructures, containing all necessary information
to perform packet forwarding such as gateway interface and mtu. Nexthops
are shared among the routes, providing more pre-computed cache-efficient
data while requiring less memory. Splitting the LPM code and the attached
data solves multiple long-standing problems in the routing layer,
drastically reduces the coupling with outher parts of the stack and allows
to transparently introduce faster lookup algorithms.
Route caching was (re)introduced to minimise (slow) routing lookups, allowing
for notably better performance for large TCP senders. Caching works by
acquiring rtentry reference, which is protected by per-rtentry mutex.
If the routing table is changed (checked by comparing the rtable generation id)
or link goes down, cache record gets withdrawn.
Nexthops have the same reference counting interface, backed by refcount(9).
This change merely replaces rtentry with the actual forwarding nextop as a
cached object, which is mostly mechanical. Other moving parts like cache
cleanup on rtable change remains the same.
Differential Revision: https://reviews.freebsd.org/D24340
The macros CAST_USER_ADDR_T() and CAST_DOWN() were used for the Mac OS/X
port. The first of these macros was a no-op for FreeBSD and the second
is no longer used.
This patch gets rid of them. It also deletes the "mbuf_t" typedef which
is no longer used in the FreeBSD code from nfskpiport.h
This patch should not change semantics.
With the inclusion of caroot bits, we'll need to also rehash on update as we
do in mergemaster/etcupdate.
If certctl's installed on the system, just unconditionally rehash. This
isn't an expensive operation, and we can refine it to compare
INDEX-{OLD,NEW} later if we really want to.
Reviewed by: emaste, allanjude
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21805
IEEE80211_MESH_RTCMD_ADD was invoking memcmp() to validate the
supplied address directly on the user pointer rather than first doing
a copyin() and validating the copied value.
IEEE80211_MESH_RTCMD_DELETE was passing the user pointer directly to
ieee80211_mesh_rt_del() rather than copying the user buffer into a
temporary kernel buffer.
Reviewed by: brooks, kib
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24562
It turns out that currently mandoc(1) is not handling Fl in Ss
correctly (maybe it never was). Let's just replace "Fl S \&Ss ..."
with "-S ...". After all, this subsection title is stylized anyway, so Fl
is not that helpful.
MFC after: 2 weeks
pmap_emulate_modify() was assuming that no changes to the pmap could
take place between the TLB signaling the fault and
pmap_emulate_modify()'s acquisition of the pmap lock, but that's clearly
not even true in the uniprocessor case, nevermind the SMP case.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24523
MipsDoTLBMiss() will load a segmap entry or pde, check that it isn't
zero, and then chase that pointer to a physical page. If that page has
been freed in the interim, it will read garbage and go on to populate
the TLB with it.
This can happen because pmap_unwire_ptp zeros out the pde and
vm_page_free_zero()s the ptp (or, recursively, zeros out the segmap
entry and vm_page_free_zero()s the pdp) without interlocking against
MipsDoTLBMiss(). The pmap is locked, and pvh_global_lock may or may not
be held, but this is not enough. Solve this issue by inserting TLB
shootdowns within _pmap_unwire_ptp(); as MipsDoTLBMiss() runs with IRQs
deferred, the IPIs involved in TLB shootdown are sufficient to ensure
that MipsDoTLBMiss() sees either a zero segmap entry / pde or a non-zero
entry and the pointed-to page still not freed.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24491
For such mappings we need to dump 512 page table pages, not one, and
they need to be included in the pmap size recorded in the minidump
header.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Klara Inc.
The comment referenced a non-existent function, and these minidump
implementations already buffer discontiguous physical data pages by
mapping them into a single VA range that gets passed to the dump device,
so there is no real advantage in batching calls to blk_write().
The RISC-V and MIPS minidump implementations still write a page at a
time and so would benefit from some form of batching.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Klara Inc.
These mappings are never visible to userspace as they get replaced when
the amd64 pmap is bootstrapped, but there is no need to set PG_U in the
first place.
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24547
Some of the consumers in-base may make it enticing enough to ensure that
COMPAT_FREEBSD12, which is notably a fairly light option at the moment, is
included in custom kernel configs.
Suggested by: netchild
Casualty: mail jail
This stops the compiler from using the x18 register. Some UEFI
implementations assume this will be preserved when calling the Boot
Services.
MFC after: 2 weeks
Sponsored by: Innovate UK
Kernel prints the device announcement before the attach method is
called, so if the correct description is not set by the probe method,
then the announcement would have an incorrect one.
MFC after: 1 week
Use DRIVER_MODULE_ORDERED(SI_ORDER_ANY) so that ig4's ACPI attachment
happens after iicbus and acpi_iicbus drivers are registered.
I have seen a problem where iicbus attached under ig4 instead of
acpi_iicbus when ig4.ko was loaded with kldload. I believe that that
happened because ig4 driver was a first driver to register, it attached
and created an iicbus child. Then iicbus driver was registered and,
since it was the only driver that could attach to the iicbus child
device, it did exactly that. After that acpi_iicbus driver was
registered. It would be able to attach to the iicbus device, but it was
already attached, so nothing happened.
MFC after: 2 weeks
Revert r354606 to restore r354605.
Apply one line from jemalloc commit d01b425e5d1e1 in hash_x86_128()
to fix the build with gcc, which only allows a fallthrough attribute
to appear before a case or default label.
Submitted by: jasone in r354605
Discussed with: jasone
Reviewed by: bdrewery
MFC after: never, due to gcc 4.2.1
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24522
If the index we're trying to convert is 0 we can avoid a potentially
expensive call to getifaddrs(). No interface has an ifindex of zero, so
we can handle this as an error: set the errno to ENXIO and return NULL.
Submitted by: Nick Rogers
Reviewed by: lutz at donnerhacke.de
MFC after: 2 weeks
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D24524
This will advertise support for TRIM to the guest virtio-blk driver and
perform the DIOCGDELETE ioctl on the backing storage if it supports it.
Thanks to Jason King and others at Joyent and illumos for expanding on
my original patch, adding improvements including better error handling
and making sure to following the virtio spec.
Submitted by: Jason King <jason.king@joyent.com> (improvements)
Reviewed by: jhb
Obtained from: illumos-joyent (improvements)
MFC after: 1 month
Relnotes: yes
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D21707
The TSADC familiy is a little bit more complex than V2 and V3.
Early revision do not use syscon and do not use qsel (RK3288).
Next revision still do not use syscon but uses qsel (RK3328).
Final revision use both.
Submitted by: peterj
MFC after: 1 month
dumpon(8) has not accepted 1024-bit RSA keys since prior to r339784 (2018-10).
The manual page language was not updated at that time (oops). The minimum
accepted is 2048 bits, which is also a good default choice.
Sponsored by: Dell EMC Isilon
Preload OpenSSL ERR string data so that the formatted error messages are
vaguely meaningful. Add OpenSSL error information to the RSA_public_encrypt()
operation failure case in one-time key generation.
For obsolescent OpenSSL versions (*cough* FIPS *cough*), pre-seed the PRNG
before entering Cap mode, as old versions of OpenSSL are unaware of kernel
RNG interfaces aside from /dev/random (such as the long-supported kern.arnd, or
the slightly more recent getentropy(3) or getrandom(2)). (RSA_public_encrypt()
wants a seeded PRNG to randomize the "PS" portion of PKCS 1.5 padding or the
"MGF" pseudo-random function in OAEP padding.)
Switch dumpon to encrypt the one-time key with OAEP padding (recommended since
1998; RFC2437) rather than the obsolescent PKCS 1.5 padding (1993; RFC2313).
Switch decryptcore to attempt OAEP decryption first, and try PKCS 1.5
decryption on failure. This is intended only for transition convenience, and
we should obsolete support for non-OAEP padding in a release or two.
Reviewed by: markj
MFC After: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24534
