if_lagg(4) interfaces which were cloned in a vnet jail.
Sysctl nodes which are dynamically generated for each cloned interface
(net.link.lagg.N.*) have been removed, and use_flowid and flowid_shift
ifconfig(8) parameters have been added instead. Flags and per-interface
statistics counters are displayed in "ifconfig -v".
CR: D842
query from a remote machine, and disable accepting it by default. This
requests a routed(8) daemon to dump routing information base for debugging
purpose. An -i flag to enable it has been added.
and (T < RTT).
- Use select(2) for timeout instead of interval timer. Remove poll(2) support.
- Use sigaction(2) instead of signal(3).
- Exit in SIGINT handler when two signals are received and doing reverse DNS
lookup as ping(8) does.
- Remove redundant variables used for getaddrinfo(3).
PR: 151023
The FreeBSD is the only system that has the FEC protocol, that is a simple alias
to loadbalance protocol and does not implement the ancient Cisco FEC standard.
From now on, we remove the fec protocol from the documentation and keep the FEC
code only for compatibility.
Phabric: D539
Reviewed by: glebius, thompsa
Approved by: glebius
Sponsored by: QNAP Systems Inc.
and receives frames on any port of the lagg(4).
Phabric: D549
Reviewed by: glebius, thompsa
Approved by: glebius
Obtained from: OpenBSD
Sponsored by: QNAP Systems Inc.
devq_openings counter lost its meaning after allocation queues has gone.
held counter is still meaningful, but problematic to update due to separate
locking of CCB allocation and queuing.
To fix that replace devq_openings counter with allocated counter. held is
now calculated on request as difference between number of allocated, queued
and active CCBs.
MFC after: 1 month
It affects the IPv6 source address selection algorithm (RFC 6724)
and allows override the last rule ("longest matching prefix") for
choosing among equivalent addresses. The address with `prefer_source'
will be preferred source address.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
on "ifconfig -v". I've seen no measurable timing difference
for doing additional SIOCGI2C call for system with 4k vlans.
* Determine appropriate handler (SFP/QSFP) by reading identification
byte (which is the same for both SFF-8472 and SFF-8436) instead
of checking driver name.
MFC with: r270064
Sponsored by: Yandex LLC
optional attributes field.
- Add a 'machdep.smap' sysctl that exports the SMAP table of the running
system as an array of the ACPI 3.0 structure. (On older systems, the
attributes are given a value of zero.) Note that the sysctl only
exports the SMAP table if it is available via the metadata passed from
the loader to the kernel. If an SMAP is not available, an empty array
is returned.
- Add a format handler for the ACPI 3.0 SMAP structure to the sysctl(8)
binary to format the SMAP structures in a readable format similar to
the format found in boot messages.
MFC after: 2 weeks
* Convert ixgbe to use this ioctl
* Convert ifconfig to use generic i2c handler for "ix" interfaces.
Approved by: Eric Joyner (ixgbe part)
MFC after: 2 weeks
Sponsored by: Yandex LLC
The executable itself doesn't contain any privileged information.
An example of where this is useful is when makefs(8) is creating an image
that includes /sbin/shutdown. This can now be done without root privileges.
Reviewed by: delphij
Discussed with: delphij, des
CR: https://reviews.freebsd.org/D662
QSFP+ data via i2c inteface. These constants has been taken
from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard
rev 4.8.
* Add support for printing QSFP+ information from 40G NICs
such as Chelsio T5.
This commit does not contain ioctl changes necessary for this
functionality work, there will be another commit soon.
Example:
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....>
ether 00:07:43:28:ad:08
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 40Gbase-LR4 <full-duplex>
status: active
plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic)
vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18
module temperature: 64.06 C voltage: 3.26 Volts
lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm)
lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm)
lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm)
lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm)
Tested on: Chelsio T5
Tested on: Mellanox/Huawei passive/active cables/transceivers.
MFC after: 2 weeks
Sponsored by: Yandex LLC
sbin/devd/tests/client_test.c
* In the event that popen fails, don't dereference its return value.
* Fix array overwrite in the stream and seqpacket tests.
* Close sockets at the end of successful ATF tests.
Reported by: Coverity scan
CID: 1232019, 1232020, 1232029, 1232030
MFC after: 1 week
Sponsored by: Spectra Logic
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
presenting most interesting fields via ifconfig -v.
This version supports Intel ixgbe driver only.
Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers
MFC after: 2 weeks
mount_nfs effectively uses mount protocol v3 by default already.
v1 mount protocol is being removed along with nfsv2 by a high profile NFS
appliance vendor and our legacy v1 mount protocol usage causes rpc errors.
Makefile.inc1:
Always compile gensnmptree with bootstrap-tools when MK_BSNMP != no
instead of depending on a potentially stale tool installed on the build host
sbin/atm/atmconfig/Makefile:
- Always remove oid.h to avoid cluttering up the build/src tree.
- Consolidate all of the RESCUE/MK_BSNMP != no logic under one
conditional to improve readability
- Remove unnecessary ${.OBJDIR} prefixing for oid.h and use ${.TARGET} instead
of spelling out oid.h
- Add a missing DPADD for ${LIBCRYPTO} when compiled MK_BSNMP == yes and
MK_OPENSSL == yes and not compiling for /rescue/rescue
sbin/atm/atmconfig/main.c:
Change #ifndef RESCUE to #ifdef WITH_BSNMP in main.c to make it
clear that we're compiling bsnmp support into atmconfig
Approved by: jmmv (mentor)
Phabric: D579
PR: 143830
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This change consists of two merges from projects/zfsd/head along with the
addition of an ATF test case for the new functionality.
sbin/devd/tests/Makefile
sbin/devd/tests/client_test.c
Add ATF test cases for reading events from both devd socket types.
r266519:
sbin/devd/devd.8
sbin/devd/devd.cc
Create a new socket, of type SOCK_SEQPACKET, for communicating with
clients. SOCK_SEQPACKET sockets preserve record boundaries,
simplying code in the client. The old SOCK_STREAM socket is retained
for backwards-compatibility with existing clients.
r269993:
sbin/devd/devd.8
Fix grammar bug.
CR: https://reviews.freebsd.org/rS266519
MFC after: 5 days
Sponsored by: Spectra Logic
