672 Commits

Author SHA1 Message Date
jake
ce564f5edf Allow deprecated or unimplemented system call vectors to deliver SIGSYS,
as suggested by the sparc v9 ABI.
2002-10-26 17:38:20 +00:00
jake
83d0eead07 Remove an unused macro. 2002-10-26 17:36:37 +00:00
peter
bbcb1cd71b Add COMPAT_FREEBSD4 for the transition. COMPAT_43 was already present. 2002-10-26 04:57:19 +00:00
peter
f7fa86b743 Split 4.x and 5.x signal handling so that we can keep 4.x signal
handling clean and functional as 5.x evolves.  This allows some of the
nasty bandaids in the 5.x codepaths to be unwound.

Encapsulate 4.x signal handling under COMPAT_FREEBSD4 (there is an
anti-foot-shooting measure in place, 5.x folks need this for a while) and
finish encapsulating the older stuff under COMPAT_43.  Since the ancient
stuff is required on alpha (longjmp(3) passes a 'struct osigcontext *'
to the current sigreturn(2), instead of the 'ucontext_t *' that sigreturn
is supposed to take), add a compile time check to prevent foot shooting
there too.  Add uniform COMPAT_43 stubs for ia64/sparc64/powerpc.

Tested on: i386, alpha, ia64.  Compiled on sparc64 (a few days ago).
Approved by: re
2002-10-25 19:10:58 +00:00
tmm
f2106ce588 Initialize tick_MHz and related variables much earlier. After the last
revision of tick.c, this was done at SI_SUB_CLOCKS, which is too late
because tick_MHz is required for DELAY() to work.

Reviewed by:	jake
2002-10-25 17:42:14 +00:00
tmm
6bff02396b Fix iommu_dvmamap_sync() to use the right address when flushing the
streaming cache. This bug could have the potential to cause data
corruption on systems with Psycho U2P bridges (Sabre bridges have no
streaming cache).
However, due to the usual driver architecture, it is believed that
corruption did occur only in rare cases (if at all).
2002-10-25 17:31:31 +00:00
jake
a065785f57 Greatly improve readability of trap() by using a table to convert between
trap types and signals to send.  Rearrange KASSERTs to better handle faults
early before curthread is setup, or in the case that it gets corrupted or
set to 0.
2002-10-25 16:00:47 +00:00
jake
ab03b9e0eb Minor cleanups.
- use fields in sysent instead of PS_STRINGS
- set TSTATE_PRIV in frame0.tf_tstate for what its worth
2002-10-25 06:26:34 +00:00
julian
59e8ad5a4c Extract out KSE specific code from machine specific code
so that there is ony one copy of it. Fix that one copy
so that KSEs with no mailbox in a KSE program are not a cause
of page faults (this can legitmatly happen).

Submitted by:	(parts) davidxu
2002-10-24 23:09:48 +00:00
jhb
b5ac277f14 We always need sys/pcpu.h now, not just for the SMP case.
Approved by:	jake
2002-10-23 20:18:33 +00:00
phk
d2ef180a56 Remove NO_GEOM from sparc64.
Reminded by:	jhb
2002-10-23 18:27:37 +00:00
jake
9130753f7b - Expand struct trapframe to 256 bytes, make all fields fixed width and the
same size.  Add some fields that previously overlapped with something else
  or were missing.
- Make struct regs and struct mcontext (minus floating point) the same as
  struct trapframe so converting between them is easy (null).
- Add space for saving floating point state to struct mcontext.  This requires
  that it be 64 byte aligned.
- Add assertions that none of these structures change size, as they are part
  of the ABI.
- Remove some dead code in sendsig().
- Save and restore %gsr in struct trapframe.  Remember to restore %fsr.
- Add some comments to exception.S.
2002-10-22 18:03:15 +00:00
jake
1e5391da25 Start tick at the correct time (cpu_init_clocks), instead of cpu_startup. 2002-10-22 07:10:15 +00:00
mux
ae80af2637 Set kernelname in sparc64_init() so that the kern.bootfile
sysctl works.  This stuff should probably be made MI.

Reviewed by:	jake
2002-10-20 21:55:35 +00:00
tmm
f44b123543 Use microuptime() instead of microtime() to bound the flush wait to
avoid hiccups in case of system time adjustment.
2002-10-20 19:41:21 +00:00
tmm
5c94fe601c Add kernel dump support, based on the ia64 version (which was committed
as sparc64/sparc64/dump_machdep.c a while back).
Other than ia64 (which uses ELF), sparc64 uses a homegrown format for
the dumps (headers are required because the physical address and size of
the tsb must be noted, and because physical memory may be discontiguous);
ELF would not offer any advantages here.

Reviewed by:	jake
2002-10-20 17:03:15 +00:00
alc
8e471edd49 - Lock page queue accesses in pmap_release(). 2002-10-20 07:19:25 +00:00
marcel
d35d608c07 Add two hooks to signal module load and module unload to MD code.
The primary reason for this is to allow MD code to process machine
specific attributes, segments or sections in the ELF file and
update machine specific state accordingly. An immediate use of this
is in the ia64 port where unwind information is updated to allow
debugging and tracing in/across modules. Note that this commit
does not add the functionality to the ia64 port. See revision 1.9
of ia64/ia64/elf_machdep.c.

Validated on: alpha, i386, ia64
2002-10-19 19:16:03 +00:00
rwatson
b98187d339 Permits UFS ACLs to be used with the GENERIC kernel. Due to recent
ACL configuration changes, this shouldn't result in different code paths
for file systems not explicitly configured for ACLs by the system
administrator.  For UFS1, administrators must still recompile their
kernel to add support for extended attributes; for UFS2, it's sufficient
to enable ACLs using tunefs or at mount-time (tunefs preferred for
reliability reasons).  UFS2, for a variety of reasons, including
performance and reliability, is the preferred file system for use with
ACLs.

Approved by:	re
2002-10-19 16:54:15 +00:00
tmm
fe000c215a Explicitely specify an alignment for struct pcb. While all regular pcb's
are positioned and aligned by md code, dumppcb is just a static
variable and requires this.
2002-10-19 15:54:34 +00:00
tmm
af79946f12 When entering the firmware mappings into the kernel tlb, clear all 'soft'
bits that might be set in the firmware tte data field, and set the soft
flag TD_EXEC to mark the page executable. Failing to do the latter would
cause fatal instruction faults in the prom in certain situations.

Reviewed by:	jake
2002-10-17 18:16:21 +00:00
tmm
b8616ce784 Add "pci108e,8000" (psycho) and "pci108e,a000" (US-IIi sabre) to the list of
recognized compat properties. This should make the psycho driver attach
properly on SPARCengine Ultra AX machines.
Switch to a table-driven logic to recognize the ID's, since their number
is now large enough to justify this.

These changes are analogous to those made in NetBSD r.1.35, but
implemented a bit differently.
2002-10-16 17:37:50 +00:00
tmm
04ced36540 Use a linked list to keep the psycho softcs instead of a statically
sized array.
While being there, deuglify the psycho pair detection loop which became
quite awkward in a previous code reorganization.
2002-10-16 17:03:36 +00:00
peter
460da4d5cb The a.out md_coredump stuff isn't referenced anywhere anymore, and
hasn't been filled in for ages..  Nuked.
2002-10-15 00:02:50 +00:00
mike
274818ff2c Remove the P1003_1B kernel option; it is no longer used. 2002-10-13 16:29:17 +00:00
mike
ca337b355f #ifdef _KERNEL not #if _KERNEL.
Pointy hat to:	mike
2002-10-13 12:33:38 +00:00
mike
0768501a2f Add standards visibility conditionals. Change any uses of sigset_t to
struct __sigset to avoid depending on objects from <sys/signal.h>.
2002-10-13 00:31:46 +00:00
jake
d4349d3d83 Removed unused tl0_syscall. 2002-10-12 23:43:04 +00:00
mike
9da14c0f1d Add conditionals to allow va_list to be defined in other headers. 2002-10-06 22:02:06 +00:00
mike
11edf68c64 o Add conditionals to allow va_list to be defined in other headers.
o Standardize on _MACHINE_STDARG_H_ to allow multiple header includes.
o Restrict the definition of va_copy() to C99 environments.
2002-10-06 22:01:07 +00:00
mux
f466161c85 Add two extern's for adjkerntz and wall_cmos_clock, all other
archs have them there, alghough the variable are declared in
subr_clock.c.  These should probably be moved into some MI
place.

Approved by:	jake
2002-10-05 20:14:49 +00:00
phk
951c3e53b2 NB: This commit does *NOT* make GEOM the default in FreeBSD
NB: But it will enable it in all kernels not having options "NO_GEOM"

Put the GEOM related options into the intended order.

Add "options NO_GEOM" to all kernel configs apart from NOTES.

In some order of controlled fashion, the NO_GEOM options will be
removed, architecture by architecture in the coming days.

There are currently three known issues which may force people to
need the NO_GEOM option:

boot0cfg/fdisk:
        Tries to update the MBR while it is being used to control
        slices.  GEOM does not allow this as a direct operation.

SCSI floppy drives:
        Appearantly the scsi-da driver return "EBUSY" if no media
        is inserted.  This is wrong, it should return ENXIO.

PC98:
        It is unclear if GEOM correctly recognizes all variants of
        PC98 disklabels.  (Help Wanted!  I have neither docs nor HW)

These issues are all being worked.

Sponsored by:	DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
mike
029ec48b98 Fix namespace issues by using visibility conditionals from
<sys/cdefs.h>.
2002-10-05 05:47:56 +00:00
mike
c9d55a4efc style(9) <machine/setjmp.h> headers so they look mostly the same. 2002-10-04 22:10:06 +00:00
sam
1ba0866904 New bus_dma interfaces for use by crypto device drivers:
o bus_dmamap_load_mbuf
o bus_dmamap_load_uio

Test on i386.  Known to compile on alpha and sparc64, but not tested.
Otherwise untried.
2002-10-04 20:40:39 +00:00
scottl
3a150bca9c Some kernel threads try to do significant work, and the default KSTACK_PAGES
doesn't give them enough stack to do much before blowing away the pcb.
This adds MI and MD code to allow the allocation of an alternate kstack
who's size can be speficied when calling kthread_create.  Passing the
value 0 prevents the alternate kstack from being created.  Note that the
ia64 MD code is missing for now, and PowerPC was only partially written
due to the pmap.c being incomplete there.
Though this patch does not modify anything to make use of the alternate
kstack, acpi and usb are good candidates.

Reviewed by:	jake, peter, jhb
2002-10-02 07:44:29 +00:00
jake
a0fcfdf113 Remove options NO_MODULES=true. Lots of modules build, but may not load
or work properly.  MAC modules work at least :).
2002-10-02 01:33:50 +00:00
jake
b5dfcc0b31 Convert the bus space accessors from macros to inlines. This fixes some
problems with drivers that expect functions rather than function like
macros.

Reviewed by:	tmm
2002-10-01 16:32:09 +00:00
jake
85e12cff3b Get rid of the TODO macro in the few places that still need work; either
comment it out or change to explicit panics.  It conflicts with things
like #if TODO in drivers.
2002-10-01 06:34:21 +00:00
jake
4cc048934a Add needed include of queue.h. 2002-10-01 02:50:26 +00:00
jake
ce6cadf021 Use M_NOWAIT instead of M_WAITOK when allocating dmamaps; the allocations
functions may be called from a device strategy routine when sleeping is
bad.

Submitted by:	phk
Reviewed by:	tmm
2002-10-01 00:17:39 +00:00
jake
27927de410 Renamed intr_enqueue to intr_vector and intr_dequeue to intr_fast, to
better reflect how they are called.
2002-09-28 03:06:35 +00:00
jake
eeddd0ac0f Moved most interrupt related code to a new file, interrupt.S. 2002-09-28 01:56:24 +00:00
jake
c03e93ab3a Add a workaround for what seems to be confusion between binutils and the
sparc v9 ABI.  The Elf_Rela records for local symbols appear to already
have the symbol's value added in to the addend field, even though the ABI
specifies we need to lookup the symbol and add its value too.  This breaks
text relocations in klds because the symbol's value is added twice, and
the resulting address points off into nowhere land, so for now just use
the addend.

Tested by:	rwatson
2002-09-27 23:12:53 +00:00
jake
f4ce091d17 Removed debug code. 2002-09-25 01:13:46 +00:00
jake
030f139fca Pass the function to call (trap or syscall) to tl0_trap and tl1_trap in %o2. 2002-09-25 00:26:04 +00:00
jake
db1f953528 Rearrange tl1_trap slightly, also save and restore the out registers so
that instruction emulation is possible in kernel mode.
2002-09-24 23:22:42 +00:00
jake
0cde982423 Allocate stack space for the trapframe along with the normal register
frame in the save instruction, rather than doing a separate sub.
2002-09-24 22:19:20 +00:00
jake
1c445b956e Split user trap processing out into a separate routine so that traps which
never result in user traps don't have to plow through it.
2002-09-24 16:42:18 +00:00
mike
fb4d714b00 Be careful not to define GCC-specific optimizations in the non-GCC
case.
2002-09-23 04:32:17 +00:00