an inexact floating point exception. The variable cannot be eliminated,
unfortunately, otherwise the desired addition triggering the exception
will be emitted neither by clang, nor by gcc.
Reviewed by: Steve Kargl, bde
MFC after: 3 days
D8376 extended softfloat/hardfloat support, but used a macro that never
actually gets set except in libc and msun's Makefile.inc. So libc and libm
got built correctly, but any program including fenv.h itself assumed it was
on a hardfloat systen and emitted inline fpu instructions for
fedisableexcept() and friends.
Using __mips_soft_float makes everything work in all cases, since it's a
compiler-internal macro that is always set correctly for the target
PR: 217845
Submitted by: Dan Nelson <dnelson_1901@yahoo.com>
MFC after: 1 week
ATF tests have a default WARNS of 0, unlike other usermode programs. This
change is technically a noop, but it documents that the msun tests don't
work with any warnings enabled, at least not on all architectures.
Reviewed by: ngie
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
Differential Revision: https://reviews.freebsd.org/D9933
The clang 4.x+ upgrade now causes this testcase to fail, but
only on amd64.
More investigation will be done to determine the cause.
MFC after: 1 week
Reported by: Jenkins
PR: 217528
Sponsored by: Dell EMC Isilon
Recent changes (maybe a side-effect of the ATF-ification in r314649)
invalidate the failure expectation.
PR: 205446
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This is being done as a precursor for work needed to annontate failing
testcases with clang 4.0+.
MFC after: 1 week
PR: 217528
Sponsored by: Dell EMC Isilon
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
of the clang version
This works around breakage on ^/stable/10 when running installworld from
a ^/stable/10 host where the test wouldn't be compiled on the first
go-around and would be missing when make installworld is run.
MFC after: 1 week
PR: 208703
Reported by: emaste
Sponsored by: Dell EMC Isilon
This contains some new testcases in /usr/tests/...:
- .../lib/libc
- .../lib/libthr
- .../lib/msun
- .../sys/kern
Tested on: amd64, i386
MFC after: 1 month
These symbols already appear in the common lib/msun/Symbol.map.
Duplicate entries produce an error with LLVM's LLD linker.
Reviewed by: br
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8627
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
This cleans up a warning when building libm at higher WARNS levels and
makes the intent more clear. By the C standard the values are assigned
to subobject members in order so this change introduces no functional
change. (6.7.9 20)
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8333
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
s_{fabs,fmax,logb,scalb}{,f,l}.c may be built elsewhere with a higher
WARNS setting.
Reviewed by: ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8061
the build on i386. Leave them in the source tree for regression tests.
The asm functions were always much less accurate (by a factor of more
than 10**18 in the worst case). They were faster on old CPUs. But
with each new generation of CPUs they get relatively slower. The
double precision C version's average advantage is about a factor of 2
on Haswell.
The asm functions were already intentionally avoided in float and long
double precision on i386 and in all precisions on amd64. Float
precision and amd64 give larger advantages to the C version. The long
double precision C code and compilers' understanding of long double
precision are not so good, so the i387 is still slightly faster for
long double precision, except for the unimportant subcase of huge args
where the sub-optimal C code now somehow beats the i387 by about a
factor of 2.
versions of fmodf() amd fmodl() on i387.
fmod is similar to remainder, and the C versions are 3 to 9 times
slower than the asm versions on x86 for both, but we had the strange
mixture of all 6 variants of remainder in asm and only 1 of 6
variants of fmod in asm.
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
The testcase always fails today due to how C11 7.6.1/2 is interpreted
with clang 3.8.0 when combined with "#pragma STDC FENV_ACCESS ON".
This testcase passes with clang <3.8.0 and gcc, so continue testing it
with those compiler combinations
More intelligent discussion on the issue is in the PR
MFC after: never
PR: 208703
Sponsored by: EMC / Isilon Storage Division
The previous method would completely nerf CFLAGS once bsd.progs.mk had
recursed into the per-PROG logic and make the CFLAGS for tap testcases
to -O0, instead of appending to CFLAGS for all of the tap testcases.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
